原状膨胀土剪切力学特性的应变速率效应

为研究应变速率对原状膨胀土力学性状的影响,通过GDS三轴试验系统进行了不同速率和围压下的固结不排水三轴剪切试验,分析了应力−应变曲线、孔隙水压力、剪切强度以及破坏模式随应变速率的变化规律。结果表明：不同应变速率下,膨胀土应力−应变曲线均呈应变硬化型。随着应变速率的增加,不排水剪切强度单调递增,引入应变速率参数ρ_0.9后发现,不排水强度增长率为14.3%～23.2%,平均值为18.4%。低围压下,应变速率对孔隙水压力影响较小,随着围压的增大,孔隙水压力的发展趋势由软化型转变为硬化型,孔隙水压力峰值随应变速率的增大而减小。原状膨胀土应变速率效应与其多裂隙性密切相关,破坏形式表现为小应变速率下主剪切带与次剪切带共存,大应变速率下仅有主剪切带,裂隙或多剪切带的出现强化了膨胀土强度的应变速率效应。     

常见稀有气体采样容器研究进展及意义

稀有气体是地学研究的重要手段之一,在研究成矿流体来源、壳幔相互作用过程中具有重要的研究意义,其组成及同位素比值是研究天体和地质体来源、成岩机理及各种地质和物理化学过程的关键,可作为地球化学示踪剂。如何有效地在大气圈、水圈和岩石圈进行稀有气体同位素样品的提取,是气体同位素研究急需解决的基础科学问题,所以气体采样容器和取样技术显得尤为重要。本文在文献调研的基础上,对常见的采样容器的优缺点进行对比,并总结了不同采样容器对稀有气体取样的优劣性。常见的气体采集容器包括不锈钢瓶、铜管、玻璃瓶、气体采样袋、注射器等,而稀有气体的采集容器常为不锈钢瓶和铜管等;通过对比表明不锈钢瓶具有耐高温、耐高压、抗强腐蚀、不易燃、不易爆等特点和优越性,在气体样品采集和运输过程中稳定性最好,实验效果也最好;铜管采样效果和密封性好,但操作较为复杂;玻璃采样容器效果次之;石英玻璃瓶虽然操作简便,但是运输保存不便;气体采样袋和注射器的采集和运输储存效果较差。因此建议稀有气体样品采集使用不锈钢瓶和铜管以及钠钙材质的玻璃瓶,不建议将石英材质玻璃容器以及注射器和气袋作为稀有气体的采样工具。该工作可为气体地球化学的研究提供新的参考。     

有载冻融作用对深部重塑黏土抗剪强度影响的试验研究北大核心CSCD

深厚表土层冻结法凿井工程中,深部土体由于经历了高压冻融作用,导致其工程性质变化,认识冻融作用对其强度与变形影响,对于冻融病害防治有一定意义。本文通过室内试验对深部重塑黏土进行了有载冻融,并对不同干密度、围压、冻结温度和融化温度条件下的深部冻融重塑黏土进行三轴剪切试验,探讨有载冻融作用下深土重塑土抗剪强度的变化规律。研究结果表明:冻融作用使深部重塑黏土的偏应力-应变关系由软化型转变成硬化型;同时,经冻融作用后其抗剪强度与割线模量都产生了一定的下降,在本试验条件下,抗剪强度最高下降了48.8%,割线模量E_()最大下降了72.0%。通过对各影响因素的显著性分析,发现初始干密度对抗剪强度和割线模量影响最为显著,围压对两者的影响最弱。     

测老庙坳陷早白垩世巴音戈壁组叠锥构造特征及其环境解释

为了全面了解测老庙坳陷早白垩世叠锥构造的沉积特征,并探讨其成因及形成环境等问题,运用野外露头实测、光薄片观察、X射线衍射分析、阴极发光照相、扫描电镜照相等方法,发现叠锥构造发育于钙质结核外侧,覆盖所有方向,呈放射状,直圆锥锥顶指向结核中心;叠锥矿物成分主要为纤维状低镁方解石,纤维状方解石呈锥形套叠,具波状消光;阴极发光显微镜下呈均一的棕红色,不具微量元素分异和析出的成岩色带;叠锥结核的发育规模明显受制于原生沉积环境.结果表明叠锥结核的发育具有明显的阶段性;其发育的原生沉积环境应为水深在5~30 m、水体能量较高的滨浅湖沉积环境.推测叠锥构造的形成可能是同沉积期生物沉积作用和胶结作用,以及后期上覆岩层静压力共同作用的结果.      

An Analytical Solution for Mechanical Responses Induced by Temperature and Air Pressure in a Lined Rock Cavern for Underground Compressed Air Energy Storage

Mechanical responses induced by temperature and air pressure significantly affect the stability and durability of underground compressed air energy storage (CAES) in a lined rock cavern. An analytical solution for evaluating such responses is, thus, proposed in this paper. The lined cavern of interest consists of three layers, namely, a sealing layer, a concrete lining and the host rock. Governing equations for cavern temperature and air pressure, which involve heat transfer between the air and surrounding layers, are established first. Then, Laplace transform and superposition principle are applied to obtain the temperature around the lined cavern and the air pressure during the operational period. Afterwards, a thermo-elastic axisymmetrical model is used to analytically determine the stress and displacement variations induced by temperature and air pressure. The developments of temperature, displacement and stress during a typical operational cycle are discussed on the basis of the proposed approach. The approach is subsequently verified with a coupled compressed air and thermo-mechanical numerical simulation and by a previous study on temperature. Finally, the influence of temperature on total stress and displacement and the impact of the heat transfer coefficient are discussed. This paper shows that the temperature sharply fluctuates only on the sealing layer and the concrete lining. The resulting tensile hoop stresses on the sealing layer and concrete lining are considerably large in comparison with the initial air pressure. Moreover, temperature has a non-negligible effect on the lined cavern for underground compressed air storage. Meanwhile, temperature has a greater effect on hoop and longitudinal stress than on radial stress and displacement. In addition, the heat transfer coefficient affects the cavern stress to a higher degree than the displacement.     

Spalling Experiments on Large Hard Rock Specimens

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.     

滇西北衙斑岩型金多金属矿床成矿流体特征及其演化

北衙超大型金多金属矿床位于扬子陆块西缘与三江特提斯造山带的结合部位。本文通过对北衙矿区内的斑岩体石英斑晶、斑岩型矿化、矽卡岩矿化中的矽卡岩及外围似层状热液型铅锌银矿化的岩(矿)石中发育的流体包裹体进行了系统研究,发现北衙矿区内主要发育CO2、富CO2、含CO2、含子矿物三相、富气相水溶液及气液两相水溶液包裹体六类流体包裹体;与斑岩型矿化有关的成矿流体为中-高温Na Cl-H2O-CO2体系热液,矽卡岩矿化相关成矿流体为一种高温的Na Cl-H2O及Na Cl-H2O-CO2体系热液,而外围似层状铅锌银矿化相关的成矿流体则为中温的Na Cl-H2O-CO2体系热液。对比分析表明,矽卡岩矿化中的矽卡岩矿物(以绿帘石类矿物为主)形成较早,其中发育富气相的流体包裹体,可以推断岩浆侵位后先分异出富水蒸气的流体,此后CO2才从成矿流体中大量分异。斑岩型矿化及外围地层中似层状铅锌银矿化脉体中发育的流体包裹体与斑岩体石英斑晶内发育的流体包裹体组合类型基本一致,表明成矿流体主要来自斑岩体结晶分异出的岩浆热液。流体包裹体研究表明,北衙金多金属矿区内的矽卡岩型(金铜铁)、斑岩型(铜金钼)及外围碳酸盐岩等地层中的似层状热液型(铅锌银)矿床系列为与富碱斑岩体侵位活动有关的,由岩浆分异热液并逐渐演化形成的斑岩型金-铁铜-铅锌(银)多金属成矿系统。