水文变异的滑动F识别与检验方法

针对传统F检验法只能用于已知变异点的检验,而无法用于变异点的识别问题,本文提出了滑动F识别与检验法。该法首先利用传统F检验法对序列逐点进行检验,找出满足F计算值大于临界值的所有可能变异点,然后选择F计算值达到最大值的那一点作为最可能变异点。利用该法对潮白河水资源分区45年年径流量序列进行了分析,并从物理成因角度对该检验结果进行了确认。结果表明滑动F 识别与检验法具有较好的检验效果,检验结果可信度较高。     

Recent tectonic stress field zoning in Sichuan-Yunnan region and its dynamic interest

In this paper, we have carefully determined the stress zones in the Sichuan-Yunnan region with reference to the in-situ stress data of hydraulic fracturing and the inverted fault slip data by using the step-by-step convergence method for stress zoning based on focal mechanism solutions. The results indicate that the tectonic stress field in the Sichuan-Yunnan region is divided into 3 stress zones by 2 approximately parallel NNW-trending stress transition belts. The area between the 2 belts is the Sichuan-Yunnan stress zone where the maximum principal stress σ1 is just in the NNW direction. The eastern boundary of Sichuan-Yunnan stress zone （the eastern stress transition belt） is basically consistent with the eastern boundary of Sichuan-Yunnan rhombic block. The western boundary of Sichuan-Yunnan stress zone （the western stress transition belt） is not totally consistent with the western boundary of Sichuan-Yunnan rhombic block. The northern segment of the western stress transition belt extends basically along the Jinshajiang fault and accords with the western boundary of Sichuan-Yunnan rhombic block, while its southern segment does not extend along the southwestern boundary of the rhombic block, i.e., Honghe fault and converge with the eastern stress transition belt, but stretches continuously in the NNW direction and accords with the Yingpanshan fault. We therefore consider that under the combined influence from the northward motion of India Plate, the southeastward shift of east Qinghai-Xizang Plateau and the strong obstruction of South China block, the tectonic stress field in the Sichuan-Yunnan region might not be totally controlled by the previous tectonic frame and new stress transition belt may have possibly formed.     

Landslide and debris-flow hazard analysis and prediction using GIS in Minamata–Hougawachi area, Japan

On July 20, 2003, following a short duration of heavy rainfall, a debris-flow disaster occurred in the Minamata–Hougawachi area, Kumamoto Prefecture, Japan. This disaster was triggered by a landslide. In order to assess the landslide and debris-flow hazard potential of this mountainous region, the study of historic landslides is critical. The objective of the study is to couple 3D slope-stability analysis models and 2D numerical simulation of debris flow within a geographical information systems in order to identity the potential landslide-hazard area. Based on field observations, the failure mechanism of the past landslide is analyzed and the mechanical parameters for 3D slope-stability analysis are calculated from the historic landslide. Then, to locate potential new landslides, the studied area is divided into slope units. Based on 3D slope-stability analysis models and on Monte Carlo simulation, the spots of potential landslides are identified. Finally, we propose a depth-averaged 2D numerical model, in which the debris and water mixture is assumed to be a uniform continuous, incompressible, unsteady Newtonian fluid. The method accurately models the historic debris flow. According to the 2D numerical simulation, the results of the debris-flow model, including the potentially inundated areas, are analyzed, and potentially affected houses, river and road are mapped.     

Sulfur Isotope Geochemistry of the Supergiant Xikuangshan Sb Deposit, Central Hunan, China: Constraints on Sources of Ore Constituents

Abstract. The supergiant Xikuangshan Sb deposit is located in the Middle to Upper Devonian limestone of central Hunan, China. Primary ores are composed of early-stage stibnite and calcite with rare pyrite, early main-stage stibnite and quartz, and late main-stage stibnite and calcite. New sulfur isotope data reveal the clustering of δ³⁴S values (+5 ∼ +8 %) for both early and late main-stage stibnite; a single early-stage stibnite exhibits δ³⁴S value (+7.5 %) identical to its main ore-stage counterparts and the coexisting calcite has almost unmodified carbon isotope composition (-4.4 %). The data suggest a probable common source of sulfur for stibnite that was deposited at different paragenetic stages. A much wider variation in δ³⁴S values for early main-stage stibnite (+3.5 to +16.3 %, av. +7.5 %) compared to that for late main-stage stibnite (+5.3 to +8.1 %, av. +6.2 %) can be interpreted to be due to local interaction of earlier ore fluid with Devonian host rocks. The previous studies show that the Precambrian basement contains elevated Sb concentrations, and two distinctive sulfur reservoirs with δ³⁴S_pyrite values at ca. +11 ∼ +24 % and -7.0 ∼-11 %. The homogenizing effect for sulfur hydrothermally leached from the two reservoirs might have provided ore constituents for the Xikuangshan fluids.     

Nutrient fluxes induced by disturbance in Meiliang Bay of Lake Taihu

A wave flume experiment was conducted to study nutrient fluxes at water-sediment interface of Meiliang Bay under different hydrodynamic conditions. The results reveal that hydrodynamics has remarkable effects on nutrient fluxes in this area. With a bottom wave stress of 0.019 N m^?2 (equivalent to disturbance caused by wind SE 5–7 m s^?1 at the sediment sample site of Meiliang Bay), the fluxes of TN, TDN and NH₄ ⁺-N were separately 1.92 × 10^?3, ?1.81 × 10^?4 and 5.28 × 10^?4 mg m^?2 s^?1 (positive for upward and negative for downward), but for TP, TDP and SRP, the fluxes were 5.69 × 10^?4, 1.68 × 10^?4 and ?1.29 × 10^?4 mg m^?2 s^?1. In order to calculate the released amount of nutrients based on these results, statistic analysis on the long-term meteorological data was conducted. The result shows that the maximum lasting time for wind SE 5–7 m s^?1 in this area is about 15 h in summer. Further calculation shows that 111 t TN, 32 t NH₄ ⁺-N, 34 t TP and 10 t TDP can be released into water (the sediment area was 47.45% of the whole surface area), resulting in concentration increase of 0.025, 0.007, 0.007 and 0.002 mg L^?1 separately. With stronger disturbance (bottom wave stress is 0.217 N m^?2 which is equivalent to disturbance caused by wind SE 10–11 m s^?1 at the same site), there has been significant increase of nutrient fluxes (1.16 × 10^?2, 6.76 × 10^?3, 1.14 × 10^?2 and 2.14 × 10^?3 mg m^?2 s^?1 for TN, DTN and NH₄ ⁺-N and TP). The exceptions were TDP with flux having a decrease (measured to be 9.54 × 10^?5 mg m^?2 s^?1) and SRP with flux having a small increase (measured to be 5.42 × 10^?5 mg m^?2 s^?1). The same statistic analysis on meteorological data reveal that the maximum lasting time for wind SE 10–11 m s^?1 is no more than 5 h. Based on the nutrient fluxes and the wind lasting-time, similar calculations were also made suggesting that 232 t TN, 134.9 t TDN, 228 t NH₄ ⁺-N, 42.7 t TP, 2.0 t TDP and 1.1 t SRP will be released from sediment at this hydrodynamic condition resulting in the concentration increases of 0.050, 0.029, 0.049, 0.009, 0.0004 and 0.0002 mg L^?1. Therefore in shallow lakes, surface disturbance can lead to significant increase of nutrient concentrations although some components in water column had negative flux with weak disturbance (e.g. TDN and SRP in this experiment). In this case, sediment looks to be a source of nutrients. These nutrients deposited in sediment can be carried or released into water with sediment resuspension or changes of environmental conditions at water-sediment interface, which can have great effects on aquatic ecosystem and is also the characteristics of shallow lakes.     

场地地震安全性评价中确定设计地震动参数若干问题研究

本文研究确定设计地震动参数中涉及的若干问题,其中包括基岩水平加速度反应谱衰减关系的选择、震源深度对基岩水平加速度峰值及基岩反应谱曲线的影响、强度包络线函数及输入随机相位的选择、土体非线性特性参数和土层剪切波速值的选择、设计地震动反应谱的标定等问题。本文基于一个典型场地计算剖面,采用一维等效线性化模型并通过逐项变换某些研究参数的方法,研究了各种因素对设计地震动参数可能产生的影响及存在的误差和相应的规律。     

Logging Data High-Resolution Sequence Stratigraphy

INTRODUCTIONOutcrop,core ,and logging data sequence stra-tigraphy began in the early 1980s . The developmentis founded on the use of petrogeological informationto verify seismic sequence stratigraphy (Van Wagon-er et al .,1990 ,1988 ; Posamentier and Vail ,1988 ;Vail , 1987) . Research has continued to progress ,and outcrop, core , and logging data have advancedresearch methods in sequence stratigraphy . Thisstudy presents“logging data high-resolution sequencestratigraphy”, whichis ba…     

东风低空急流暴雨的中尺度分析

东风低空急流暴雨在湖北比较少见。使用卫星云图、武汉多普勒雷达资料和地面中尺度资料，针对2004年6月4～5日发生在湖北中东部地区的一次东风低空急流暴雨过程进行了中尺度分析，得到：（1）东风低空急流暴雨是在有利的大尺度背景场条件下，在特定的地域触发产生的；（2）东风低空急流在暴雨的形成和发展中起到重要的作用；（3）东风低空急流暴雨是由中尺度回波团和中尺度复合体造成的；（4）东风低空急流暴雨是在多种尺度天气系统相互作用的情况下发生发展的，而中小尺度系统是其产生的最直接的系统。     

贵州省金沙煤田龙潭组岩煤层测井对比方法

龙潭组是金沙井田的主要含煤地层，含煤达12~15层，其中7、8、9、11、12五层煤较稳定，为主要可采煤层。根据测井物性曲线与地质岩心的对比分析，总结出该组煤岩层的共有测井物性规律：低密度、中低电阻率、较高中子孔隙度和较低的纵波速度，以及其特有规律如：5、6、7、8、9煤层的低自然伽马，11、12煤层较高的自然伽马等特征。结合煤层测井曲线形态特征及其与顶、底板以及和煤层上、下标志层间组合关系，进行了全煤系地层的对比，揭示了该井田煤层的分岔、合并、冲刷、沉缺、煤层厚度等变化规律。     

A Large Ductile Sinistral Strike-Slip Shear Zone and Its Movement Timing in the South Qilian Mountains, Western China

There is a large ductile shear zone, 2 km wide and more than 3SO km long, in the South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareous mylonites. The microstructures of the ductile shear zone show nearly E-W extending subvertical foliation, horizontal and oblique stretching lineations, shearing sense from sinis-tral to oblique sinistral strike-slip from east to west, "A" type folds and abundant granitic veins. Measured lattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the granitic mylonite in the west segment suggest a strong LPO characterized by the dominant slip systems {1010} formed at high temperature (>650℃). K-feldspar of the mylonite shows an 39Ar/40Ar high-temperature plateau age of 243.3±1.3 Ma, and biotite, 250.5±0.5 Ma, which represent the formation age of the ductile shear zone. The 39Ar/40Ar plateau ages of 169.7±0.3 Ma and 160.6±0.1 Ma and the 39Ar/40Ar isochron ages of 166.99±2.37 Ma and 160.6±0.1 Ma of biot