Characteristics of deuterium excess parameters for geothermal water in Beijing

This study investigates the characteristics of geothermal water in 10 geothermal fields in Beijing. The relationships between the deuterium excess parameter (d) and temperature, depth, age of geothermal groundwater, groundwater flow field, and Eh were investigated using geothermal groundwater samples. Results showed that (1) the average d value of geothermal water is 5.4, whereas that of the groundwater in normal temperature is 6.04. The differences are induced by the oxygen isotope exchange during the water–rock interaction, which may be more easily completed in geothermal water than in cold groundwater. (2) The d value increases remarkably with the age of the geothermal groundwater. The d value increases from 11.2 to 14.6 when the age of the geothermal water is 12,760 ± 130 a and 38,960 ± 630 a, respectively. Moreover, the isotope heat exchange for composition of the hydrogen and oxygen isotopes in the geothermal groundwater proceeds sufficiently with time. (3) The d value decreases from 5.72 to 3.03 when the depth increases from 125.13 to 3221 m. Generally, in the same area, the d value decreases with depth because the temperature is increasing. (4) The d value of the groundwater gradually reduces from the northern recharge area to the southern discharge area. The average d value is 7.31 in the northern recharge area and 5.68 in the middle Beijing Depression, whereas the d value in the southern area of Fengheying is ?9.20. The larger difference in d values between the recharge and discharge areas is due to the slower velocity of underwater flow, which induces longer time for oxygen exchange. (5) The relationship between the d and Eh is complex. When Eh is <200 mV, the d value of the geothermal water decreases with the decrease in Eh. When Eh is higher than 200 mV, the d value increases slightly with the decrease in Eh. The study of the characteristics of deuterium excess parameters for geothermal water could provide a scientific isotopic evidence for assessment and exploitation measures in geothermal groundwater systems.     

Relationships among volcanic and hydrothermal activity and faults from the Shunnan 3-D well zone in the Tadong Area (Tarim Basin,China)

Tarim Basin distributed widely two stages of Permian volcanic rocks. However, the location and timing of these rocks pinching out and the relationship between Ordovician carbonate hydrothermal reservoirs and fault activity remain unclear. The Shunnan (Shunnan here in after referred to as SN) 1 3-D well zone in the eastern Tarim Basin contains volcanic rocks, and the Ordovician layer contains a hydrothermal reservoir. This paper describes the lithology, stage, volcanic rock distribution, crater position and deposition pinch-out line of volcanic rocks based on drilling and 3-D seismic data. The Permian strata in the well zone contain only one stage of Kupkuciman Formation basalt and tuff, the Kaipeleicike Formation contains terrigenous clastic rock and the adjacent volcanic rocks of wells SN2 and GL (Gulong here in after referred to as GL) 2 exhibit an absence of deposition. Although the craters are distributed on both sides of the NNW faults that cross well SN4, their positions are also controlled by the intersection of earlier NEE and NW faults and later NNE faults. Furthermore, the Ordovician strata in the SN1 well zone developed abundant tubular high-amplitude anomalies and tabular high-amplitude anomalies via hydrothermal corrosion, and the anomaly distributions are similar to the positions of the craters, which are controlled by the intersection of multi-group faults and the density of the faults.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

南海北部潮汕坳陷侏罗系沉积特征及对储层的控制作用研究

南海北部潮汕坳陷侏罗系具有很大的油气勘探潜力,沉积特征对其储层的发育具有明显的控制作用。通过对研究区最新地震资料精细解释,可以划分出4个典型地震反射界面和3个地震反射层,根据层序界面圈出侏罗系分布特征和残留厚度;通过地震相-沉积相转换对比分析研究,识别出侏罗纪地层不同时期的沉积相类型及其分布特征,重塑了潮汕坳陷侏罗系沉积演化史。该区主要发育5类沉积相、8种沉积亚相,其中滨岸三角洲前缘亚相和深水扇中亚相分别控制了碎屑流砂岩优质储层的发育;此外,浊流砂岩储层主要受控于物源供给的影响,距离三角洲砂体朵叶越近,滑塌浊积体数量越多,面积也越大。总体上,滨岸三角洲前缘亚相、深水扇中亚相和滑塌浊积体是研究区良好的储集相带,该类储集体由于埋藏较深加之被泥岩覆盖,对油气聚集较为有利。     

中国航磁大地构造单元划分

本文以我国截止到2011年基本覆盖陆域及部分海域的航磁数据编制的全国航磁系列图为基础,以航磁反映的区域磁场和磁性基底起伏特征为依据,汲取主流大地构造观的划分理念,以板块构造理论及大陆动力学思想为指导,以磁场反映的构造特征为切入点,结合重力、遥感、地质资料对中国陆域构造单元进行划分。大地构造单元划分4个级别:一级构造单元为陆块区和造山系,共划分出8个;二级构造单元为陆块、弧盆系和地块,共划分出32个;三级构造单元为盆地、坳陷带(区)和隆起带(区),共划分出85个;四级构造单元为隆起和坳陷,共划分出332个。本划分方案旨在为油气地质构造背景研究及油气勘探提供一份地球物理资料。文中重点讨论了一、二级构造单元界线厘定的磁场依据及与前人划分存在的不同之处,而三、四级构造单元完全依据磁场及磁性基底起伏情况进行划分,并在盆地和坳陷区给出了深度信息,这为油气勘探者提供了必要的技术支撑。同时,借助丰富的航磁信息提示出一些地质构造方面难解现象,供同行专家参考与讨论。     

碳酸盐台地的类型、特征和沉积模式--兼论华北地台寒武纪陆表海-淹没台地的沉积样式

随着对现代碳酸盐沉积环境的系统调查和解释、以及对碳酸盐沉积原理认识的深化,自20世纪60年代,一系列碳酸盐沉积相模式得以建立,其中最引人注目的是Wilson和Tucker的工作。但在镶边陆棚及缓坡模式得到了广泛认可和使用的同时,对陆表海和淹没台地型沉积未能予以足够的重视。与过去相比,现今的海平面是相对较低的,因而没有出现陆表海广泛发育的情况。但在漫长的地质历史时期,陆表海曾经覆盖了广泛的克拉通区域,是碳酸盐沉积最重要的场所之一。本文在系统总结前人成果的基础上,将用于描述大尺度碳酸盐岩沉积环境的碳酸盐台地分为镶边陆棚、缓坡、陆表海、孤立台地和淹没台地5种类型分别描述,并重点强调了陆表海和淹没台地的沉积模式。华北地台寒武系大面积分布的潮坪沉积、鲕粒滩相灰岩和竹叶状风暴砾屑灰岩,以及频繁出现的台地淹没事件,为阐明陆表海和淹没台地的沉积提供了绝佳实例。这些实例和研究表明了碳酸盐沉积环境的多样性和沉积过程的复杂性,以及将今论古的困难性,从而为碳酸盐沉积原理的认识和沉积环境的解释提供新认识和新思路。     

Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.