西风带研究动态

本文较为详细地介绍了影响我国气候的重要因子——西风带的一些国内外最新研究动态,这些研究动态和研究成果将对山西省的气候研究起到积极作用。     

Wavelet analysis and interpretation of gravity data in Sichuan-Yunnan region, China

Introduction Sichuan-Yunnan region, located in the east margin of Qinghai-Xizang (Tibetean) Plateau, is a transitional zone between the rapidly upheaving Tibetean Plateau and relatively steady Yangtze Platform. Under the pressure exerted by the northward movement of Indian Plate, Sichuan-Yunnan region has been undergone strong deformation and regmagenesis, becoming one of the regions with the most intensive seismicity in the world. The research on the tectonics and seismicity there is alw…     

Energetic Particles Observed in the CUSP Region During a Storm Recovery Phase

In this paper we report energetic ion behavior and its composition variations observed by the Cluster/RAPID instrument when the spacecraft was travelling in the high latitude magnetospheric boundary region on the day of the 31 March, 2001, strongest magnetic storm in the past 50 years. The Dst index reached −360 nT at about 09:00 UT. During its early recovery phase, large amounts of oxygen and helium ions were observed; the ratio of oxygen to hydrogen in the RAPID energy range reached as high as 250%, which suggests that the observed energetic particles might be of magnetospheric origin. The observations further show that enhanced energetic electron fluxes are confined in a very narrow region, while protons have occupied a larger region, and heavy ions have been observed in an even larger region. The flux of energetic electrons show a slight enhancement in a region where the magnetic field magnitude is around zero. These observed energetic ions could be quasi-trapped by the current sheet in the stagnation region of the cusp.     

Sr/Sr and Sr/Ca in speleothems for paleoclimate reconstruction in Central China between 70 and 280 kyr ago

Limestone cave deposits (speleothems) provide archives for past changes in regional climates over a range of timescales. While δ¹⁸O and δ¹³C in speleothem calcite have been commonly used for reconstruction of paleoclimates, we report here further efforts in the use of ⁸⁷Sr/⁸⁶Sr and Sr/Ca signals in speleothem calcite to deduce paleomonsoon variability near the Loess Plateau of central China. A two end-member mass-balance model of concentration and isotopic composition of strontium in a cave system is used to estimate variation of the ⁸⁷Sr/⁸⁶Sr ratio in sediments overlying a limestone cave. We show that this ratio reflects climate-driven variations in the provenance and the extent of chemical weathering of the epikarstic sediments. The measurements of ⁸⁷Sr/⁸⁶Sr made on a well-dated stalagmite, SFL, from Buddha Cave (33^o40N′ 109^o05′E) show ratios of 0.71092 to 0.71133 (±0.00001 as 2σ) during relatively cold periods (e.g., Marine Isotope Stage (MIS) 5b, 5d, and 8), lower than ratios of 0.71133 to 0.71194 during relatively warm periods (e.g., MIS 5a, 5c, 5e, and 7). As changes in the Sr/Ca ratio may affect speleothem ⁸⁷Sr/⁸⁶Sr, we show that the direct use of speleothem ⁸⁷Sr/⁸⁶Sr is less ideal than our modeled ⁸⁷Sr/⁸⁶Sr for the exogenic Sr source above the cave as a paleomonsoon proxy. Using the δ¹⁸O, δ¹³C, Sr/Ca, and ⁸⁷Sr/⁸⁶Sr records of the stalagmite, we reconstruct the variability of the East Asian monsoon for the time period between 70 and 280 kyr ago. The results show that summer monsoons were more intense during interglacial periods than during glacial periods.     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.     

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.     

Varying water utilization of Haloxylon ammodendron plantations in a desert‐oasis ecotone

Haloxylon ammodendron is a desert shrub used extensively in China for restoring degraded dry lands. An understanding of the water source used by H. ammodendron plantations is critical achieving sustainable vegetation restoration. We measured mortality, shoot size, and rooting depth in 5‐, 10‐, 20‐, and 40‐year‐old H. ammodendron plantations. We examined stable isotopic ratios of oxygen (δ¹⁸O) in precipitation, groundwater, and soil water in different soil layers and seasons, and in plant stem water to determine water sources at different shrub ages. We found that water acquisition patterns in H. ammodendron plantations differed with plantation age and season. Thus, the main water source for 5‐year‐old shrubs was shallow soil water. Water sources of 10‐year‐old shrubs shifted depending on the soil water conditions during the season. Although their tap roots could absorb deep soil water, the plantation main water sources were from soil water, and about 50% of water originated from shallow and mid soil. This pattern might occur because main water sources in these plantations were changeable over time. The 20‐ and 40‐year‐old shrubs acquired water mainly from permanent groundwater. We conclude that the main water source of a young H. ammodendron plantation was soil water recharged by precipitation. However, when roots reached sufficient depth, water originated mainly from the deep soil water, especially in the dry season. The deeply rooted 20‐ and 40‐year‐old shrubs have the ability to exploit a deep and reliable water source. To achieve sustainability in these plantations, we recommend a reduction in the initial density of H. ammodendron in the desert‐oasis ecotone to decelerate the consumption of shallow soil water during plantation establishment.     

δ18O and δ13C in fossil shells of Radix sp. from the sediment succession of a dammed palaeo‐lake in the Yarlung Tsangpo valley,Tibet, China

A series of confirmed and suspected dammed palaeo‐lake sedimentary successions is scattered within the middle Yarlung Tsangpo valley in Tibet. However, the chronology, the genesis of the dam and its location, the water level of the dammed lake, the process of dam failure and the spatiotemporal relationships between the sedimentary successions remain controversial. Here, we focus on one sedimentary succession of the suspected dammed palaeo‐lake at Xigazê. We measured the grain‐size distribution, magnetic susceptibility, organic and inorganic carbon content, and δ¹³C_org and δ¹⁵N_total ratios of the sediments. In addition, we measured the δ¹⁸O_shell and δ¹³C_shell values of modern and fossil Radix sp. shells, and the δ¹⁸O_water and δ¹³C_DIC values of the ambient water with different hydrological regimes. The results indicate that the δ¹⁸O_shell values of modern Radix sp. and the δ¹⁸O_water of the ambient water body significantly depend on its hydrological status. In addition, a strong positive relationship was observed between δ¹⁸O_shell values of modern Radix sp. shells and the δ¹⁸O_water of the ambient water on the Tibetan Plateau. According to this correlation, the δ¹⁸O_water values of the palaeo‐water body are reconstructed using the δ¹⁸O_shell values of Radix sp. fossil shells in the Xigazê section. Further, based on the δ¹⁸O_shell values of fossil Radix sp., the reconstructed δ¹⁸O_water of the palaeo‐water body and the specific habitats of Radix sp., we infer that the sedimentary succession in the Xigazê broad valley was mainly formed within the backwater terminal zone of a dammed palaeo‐lake and that the elevation of the water level of the lake was approximately 3811 m a.s.l. AMS ¹⁴C dating indicates that the deposits of the dammed palaeo‐lake were formed at about 33–22 cal. ka BP. Finally, the presence of Radix sp. fossil shells within the Xigazê section suggests that Radix sp. survived the late Last Glacial Period on the Tibetan Plateau.     

A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.