A combined hydrologic and hydraulic modeling approach for testing efficiency of structural flood control measures

The necessity of estimating the degree and spatial extent of positive impacts with regard to protecting communities and properties through potential flood control projects can be considered one of the main reasons for performing flood modeling. This paper presents an overall systematic approach based on the simulation of some extreme event conditions, using a hydrological model to generate the resulting river flows and then using a hydraulic modeling exercise to decide upon floodplain evolution in the case-study area, Bostanli river basin, which has been under the threat of flooding for many years. The potential serviceability of the planned Bostanli Dam in the study area was examined by using the HEC-HMS and HEC-RAS modeling tools, both integrated with GIS functions for spatial operations. The results indicate that the dam construction as planned would have a somewhat positive impact as a potential flood control measure, since it seems to decrease the flood peaks of 68.9 and 158.7 m³/s (that would potentially be generated by 100- and 500-year storm events under current conditions) to 65.5 and 150.7 m³/s (when the dam is in operation), respectively. However, this seems to contribute little to the overall flood mitigation performance in the basin.     

Eocene tonalite–granodiorite from the Havza (Samsun) area,northern Turkey: adakite-like melts of lithospheric mantle and crust generated in a post-collisional setting

ABSTRACT

Eocene intermediate to felsic plutons of different sizes and compositions are widespread in the Eastern Pontides Orogenic Belt in northern Turkey. Of these, the Ta?l?k Tepe pluton in the Havza (Samsun) area is fine-to-medium-grained, with granular, porphyritic, and micrographic textures, and include mafic microgranular enclaves (MMEs). LA-ICP-MS U-Pb zircon dating yielded emplacement ages of 42.9 (± 1.4) and 40.5 (± 1.3) Ma for the host granodioritic pluton and the dioritic MMEs, respectively. Petrochemically, the host pluton has I-type, high-K calc-alkaline, and metaluminous-to-slightly peraluminous features (A/CNK = 0.95–1.06). The host pluton also shows geochemical features of adakite-like rocks with high SiO₂ (67–68 wt%) and Al₂O₃ (15.5–16.0 wt%) content and Ba/La (17–23), Sr/Y (40.7–61.6), and La_N/Yb_N (14.4–23.7) ratios and low Y (8.2–9.9 ppm) and Yb_N (3.1–4.4) contents. Whole-rock major and trace element variations suggest that fractional crystallisation played a significant role in the pluton evolution. The N-MORB normalised trace element patterns of the pluton are similar to those of MMEs with enrichment in large-ion lithophile elements, Th and Ce, and negative Nb and Ti anomalies. Chondrite-normalised rare earth element plots show moderate-to-highly enriched concave patterns (La_N/Lu_N = 14.2–21.6) with insignificant negative Eu anomalies (Eu_N/Eu* = 0.86–1.14), all of which imply hornblende fractionation during magmatic evolution. The pluton samples have ⁸⁷Sr/⁸⁶Sr ratios of 0.704767 to 0.704927, ¹⁴³Nd/¹⁴⁴Nd ratios of 0.512767–0.512774, εNd values of (+2.52) – (+2.65), and δ¹⁸O values of 7.9–9.7‰. The isotopic compositions of the host pluton and MMEs are similar to I-type granitoids derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. Combined with regional studies, these new data suggest that the parental magma of the studied adakite-like pluton was generated from the lithospheric mantle and then modified by fractional crystallisation and assimilation in a post-collisional setting.     

Middle Pleistocene bivalves of the İznik lake basin (Eastern Marmara, NW Turkey) and a new paleobiogeographical approach

?znik Lake is a tectonically originated basin mainly controlled by the E–W trending middle strand of the North Anatolian Fault (NAF) system. Pleistocene sediments occurring in front of the faults are well exposed both in the northern and in the southern shorelines of the basin. In this study, two endemic brackish water bivalve species, Didacna subpyramidata Pravoslavkev 1939 and Didacna nov. sp. were found in the oldest terrace of the northern Pleistocene sequence. Having characterized morphology, these species serve as stratigraphic indicators in the regional Pleistocene stratigraphy of the Ponto-Caspian region, and thus are well correlated to the assemblages of the early Khazarian subhorizon (Middle Pleistocene). Hence, these data demonstrate that the early Khazarian brackish water sea covered the study area. Additionally, a model for the formation of the basin is proposed: the ?znik lake basin was a gulf of the former Marmara Sea in the early Khazarian, connecting the Marmara to the Black Sea and the Caspian Sea. The subsequent regional prograding uplifts, main dextral strike-slip fault and many normal faults of the NAF Zone cut off the marine connections to the basin, leading to its present location and topographic level.     

Comments on Rebuttal of M. Sagir

This rebuttal was written in response to the rebuttal of the paper “choosing a municipal landfill site by analytic network process” published in 2007 by M. Sagir. This study was conducted as an application for the landfill site selection in the environmental engineering discipline. Since ANP was only the “instrument” used in our study, the details of this existing methodology were referenced, and not presented, due to page limitations and to match the content of the journal. Responses to M. Sagir’s comments are discussed within the body of this rebuttal.     

厚层覆盖区综合物化探方法找金试验研究——以广西兴安金石金矿为例

在兴安金石金矿外围 4号分散流异常区 ,通过地电化学提取金测量法 ,查明测区存在 5个走向规模小于 5 0 m的金异常区 ,W( Au) 最大值为 72 .4× 10 - 9,高出背景值十几倍 ,并藉综合土壤吸附汞测量 ,高精度磁测和激发极化法等多种物化探方法来确定这些异常区的地质、地球化学和地球物理特征 ,提出金矿成矿的有利部位在金的地电提取高异常区、高汞量异常区、高磁性异常区、低视电阻率异常区和中等视极化率异常区的“三高一低一中”的找矿模式。确定测区的北北东角 (右下角 )一带具备有利的金矿成矿条件     

Hydrographic data modeling methods for determining precise seafloor topography

Acoustic and light detection and ranging are the recent methods used in hydrographical surveying. Depth values depending on X and Y horizontal coordinates are measured in both methods. While processing the hydrographical data, all data with different density are interpolated and modeled for determining the seafloor model using different interpolation techniques. In this study, effects of different surface modeling methods are investigated. Data obtained from single-beam echo sounder (SBES) are modeled using inverse distance, kriging, local polynomial, minimum curvature, moving average, nearest-neighbor, and Delaunay interpolation methods. Interpolation results are compared with the multibeam echo sounder data which were collected on the same area for determining the accuracy of modeling methods. Depending on the maximum total vertical uncertainty values in hydrographic survey standards, the best results were determined by using the kriging method. The Delaunay, minimum curvature, and inverse distance methods can be used for modeling the SBES data in shallow waters.     

Examination of the structural characteristics arising in gypsums by the GPR and MASW methods (Sivas,Turkey)

This study was performed at an area of 50?×?48 m² being defined as a new settlement in the northeast of Sivas. In the study, the discontinuities that are not deep and their geophysical characteristics were examined by the GPR and MASW methods. For interpretation, GPR cross sections were prepared as 2D–3D, and MASW cross sections were prepared as 2D. As for geophysical cross sections, about 10 m depth was examined. It was understood that the reflections observed in the form of hyperbolas in GPR cross sections correspond to areas having low S wave velocity (V_s) in MASW cross sections. It was understood that the S wave velocities are lower than 653 m/s, that the seismic velocities in between 653 and 275 m/s indicate partially deteriorated areas and that the S wave velocities of unweathered gypsums are higher than 1275 m/s at these low-velocity zones. Thus, it was thought that the fill material that may arise in the fracture, crack and deterioration areas arises from intercalation and clastic gypsum units, and that it plays a role in having low value S wave velocities. In all the geophysical cross sections, it was understood that the structures with gypsum are intense at the initial 5 m. And a fracture at the south of the study area, that it was estimated might be longer than 40 m, was determined as the largest gypsum structure. It was understood that this fracture starts from a depth of about 5 m in the west and that it slopes down to 7 m depth in the east. According to these results, it was understood that the damage amount arising in time in the gypsum structures from the effect of water may increase, the study area was defined as risky, and the required importance should be attached to these structures especially in foundation engineering.     

Teleseismic finite-fault inversion of two <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> = 6.4 earthquakes along the East Anatolian Fault Zone in Turkey: the 1998 Adana and 2003 Bingöl earthquakes

The East Anatolian Fault Zone is a continental transform fault accommodating westward motion of the Anatolian fault. This study aims to investigate the source properties of two moderately large and damaging earthquakes which occurred along the transform fault in the last two decades using the teleseismic broadband P and SH body waveforms. The first earthquake, the 27 June 1998 Adana earthquake, occurred beneath the Adana basin, located close to the eastern extreme of Turkey’s Mediterranean coast. The faulting associated with the 1998 Adana earthquake is unilateral to the NE and confined to depths below 15 km with a length of 30 km along the strike (53°) and a dipping of 81° SE. The fixed-rake models fit the data less well than the variable-rake model. The main slip area centered at depth of about 27 km and to the NE of the hypocenter, covering a circular area of 10 km in diameter with a peak slip of about 60 cm. The slip model yields a seismic moment of 3.5?×?10¹⁸ N-m (M_w???6.4). The second earthquake, the 1 May 2003 Bingöl earthquake, occurred along a dextral conjugate fault of the East Anatolian Fault Zone. The preferred slip model with a seismic moment of 4.1?×?10¹⁸ N-m (M_w???6.4) suggests that the rupture was unilateral toward SE and was controlled by a failure of large asperity roughly circular in shape and centered at a depth of 5 km with peak displacement of about 55 cm. Our results suggest that the 1998 Adana earthquake did not occur on the mapped Göksun Yakap?nar Fault Zone but rather on a SE dipping unmapped fault that may be a split fault of it and buried under the thick (about 6 km) deposits of the Adana basin. For the 2003 Bingöl earthquake, the final slip model requires a rupture plane having 15° different strike than the most possible mapped fault.     

Neogene basin development around Söke-Kuşadası (western Anatolia) and its bearing on tectonic development of the Aegean region

The AMS study has been performed on various types of the basement – Variscan granitic and surrounding – Mesozoic sedimentary rocks in the Velká Fatra Mountains, Tatric Superunit of the Central Western Carpathians. The Velká Fatra Mts. provides good opportunity for AMS study because of composite S-type and I-type granite character of pluton and clear relations to Mesozoic sedimentary rocks in the cover and nappe positions. The granitic massif consists of the three types of weakly magnetic peraluminous granites (350 – 340 Ma in age), ranging from two-mica granites to biotite granodiorites in composition and carrying accessory monazite and ilmenite; whereby they resemble common S-type and/or Ilmenite Series granite. This pre-existing granitic body was intruded by relatively young (304 Ma old) metaluminous to subaluminous, strongly magnetic (due to magnetite) tonalitic intrusion of the I-type and/or Magnetite Series granite. In all S-types investigated as well as in the I-type tonalite body, the magnetic fabrics are not uniform, but slightly variable within a body and differing from body to body. The magnetic fabrics in all granitic rocks can be classified as mostly magmatic in origin, only subordinately affected by ductile deformation. The Alpine overprint of the magnetic fabric of the Variscan granite frequent in the central areas of the Central Western Carpathians was only weak in the Velká Fatra Mts. and the magnetic fabrics of these granites thus mostly comprise the original Variscan magmatic fabrics. On the other hand, in the marginal parts of the Velká Fatra Mts. the magnetic fabrics in granites are locally conformable to the deformational magnetic fabrics in surrounding sedimentary rocks (Mesozoic in age) thus indicating at least local effects of the Alpine deformation. The magnetic fabrics in Mesozoic sedimentary rocks covering the crystalline basement are partially (Cover Formation) to entirely (Nappe Units) deformational in origin.