Lg Coda Q and its Relation to the Geology and Tectonics of the Middle East

—Regional seismograms were collected to image the lateral variations of Lg coda Q at 1 Hz (Q ₀?) and its frequency dependence <(eta)> in the Middle East using a back-projection method. The data include 124 vertical-component traces recorded at 10 stations during the period 1986–1996. The resulting images reveal lateral variations in both Q ₀ and <eta>. In the Turkish and Iranian Plateaus, a highly deformed and tectonically active region, Q ₀ ranges between about 150 and 300, with the lowest values occurring in western Anatolia where extremely high heat flow has been measured. The low Q ₀ values found in this region agree with those found in other tectonically active regions of the world. Throughout most of the Arabian Peninsula, a relatively stable region, Q ₀ varies between 350 and 450, being highest in the shield area and lowest in the eastern basins. All values are considerably lower than those found in most other stable regions. Low Q values throughout the Middle East may be caused by interstitial fluids that have migrated to the crust from the upper mantle, where they were probably generated by hydrothermal reactions at elevated temperatures known to occur there. Low Q ₀ values (about 250) are also found in the Oman folded zone, a region with thick sedimentary deposits. <eta> varies inversely with Q ₀ throughout most of the Middle East, with lower values (0.4–0.5) in the Arabian Peninsula and higher values (0.6–0.8) in Iran and Turkey. Q ₀ and <eta> are both low in the Oman folded zone and western Anatolia.     

Seismic Velocity and Q Structure of the Middle Eastern Crust and Upper Mantle from Surface-wave Dispersion and Attenuation

—Observed velocities and attenuation of fundamental-mode Rayleigh waves in the period range 7–82 sec were inverted for shear-wave velocity and shear-wave Q structure in the Middle East using a two-station method. Additional information on Q structure variation within each region was obtained by studying amplitude spectra of fundamental-mode and higher-mode Rayleigh waves. We obtained models for the Turkish and Iranian Plateaus (Region 1), areas surrounding and including the Black and Caspian Seas (Region 2), and the Arabian Peninsula (Region 3). The effect of continent-ocean boundaries and mixed paths in Region 2 may lead to unrealistic features in the models obtained there. At lower crustal and upper-mantle depths, shear velocities are similar in all three regions. Shear velocities vary significantly in the uppermost 10 km of the crust, being 3.21, 2.85, and 3.39 km/s for Regions 1, 2, and 3, respectively. Q models obtained from an inversion of interstation attenuation data show that crustal shear-wave Q is highest in Region 3 and lowest in Region 1. Q’s for the upper 10 km of the crust are 63, 71, and 201 for Regions 1, 2, and 3, respectively. Crustal Q’s at 30 km depth for the three regions are about 51, 71, and 134. The lower crustal Q values contrast sharply with results from stable continental regions where shear-wave Q may reach one thousand or more. These low values may indicate that fluids reside in faults, cracks, and permeable rock at lower crustal, as well as upper crustal depths due to convergence and intense deformation at all depths in the Middle Eastern crust.     

Lg Coda Q and its Relation to the Structure and Evolution of Continents: A Global Perspective

—Tomographic maps of Lg coda Q (Q ^c _Lg) variation are now available for nearly the entire African, Eurasian, South American, and Australian continents, as well as for the United States. Q ^c _Lg at 1 Hz (Q ₀) varies from less than 200 to more than 1000 and Q ^c _Lg frequency dependence (<eta>) varies between 0.0 and nearly 1.0. Q ₀ appears to increase in proportion to the length of time that has elapsed since the most recent major episode of tectonic or orogenic activity in any region. A plot of Q ₀ versus time since that activity indicates that a single Q ₀-time relation approximates most mean Q ₀ values. Those that deviate most from the trend lay in Australia, the Arabian Peninsula, and the East African rift. The increase in Q ₀ with time may be due to a continual increase in crustal shear wave Q (Q ) caused by the loss of crustal fluids and reduction of crustal permeability following tectonic or orogenic activity. Extrapolated values of Q ^c _Lg at 5 Hz (using Q ₀ and <eta> values measured at 1 Hz and assuming that <eta> is constant in all regions between 1 and 5 Hz) show a similar percentage-wise increase with times that has elapsed since the most recent activity. Other factors that can reduce Q ₀ in continental regions include thick accumulations of sediment (especially sandstone and shale of Mesozoic age and younger), severe velocity gradients at the crust-mantle transition and, possibly, lateral variations in the depth, thickness, and severity of those gradients. Severe and large increases of Q in the mid-crust of some regions can cause relatively large values of <eta>, even if the frequency dependence of Q is small.     

基于USB协议的望远镜多波带控制系统设计

怀柔观测基地的多通道太阳望远镜是通过数十个电机调节晶体偏转角度实现多波带同时观测的自动控制。原有的计算机是通过一个串行接口控制若干个调波带的电机,响应时间长,速度慢且技术比较落后。本文利用当今流行的USB2.0芯片CYPRESS EZ-USB改造原有的串口通信控制系统,大大提高了响应的速度,同时,为解决一个USB应用程序控制多个电机转动的问题,提出了一种"编号"的方法。这样每个USB设备不论其插入顺序,PC主机都能通过识别其固定编号而加以区分,PC主机可以通过4个USB接口(16个电机)控制多通道太阳望远镜滤光嚣的调制角度,实现自动控制。这为大规模改造其他计算机接口提供了研制基础。     

GAIM电离层同化方法进展

电离层是复杂的空间层结,其变化受太阳活动强度、地球磁场等因素影响。随着空间技术发展的需求,电离层天气变化成为目前空间天气预报最重要的内容之一。最近10年,人们利用卫星在电离层观测方面取得了重大进展,尤其引人注意的是:无线电掩星观测技术正走向应用的新阶段,加上已经建立的全球大量的地基GPS观测网,它们不仅为电离层动力学模式研究提供了丰富的电离层资料,而且为电离层预报提供了很好基础。因此,电离层天气预报成为当前重要的、前瞻性的研究方向,电离层资料同化是电离层预报最重要的研究内容之一。该文系统介绍这方面国际动态,重点是美国的USC/JPL和犹他州大学开展全球电离层同化模型研究、全球电离层同化研究的进展,以及在电离层天气预报中应用的初步成果。     

Morphological observation of Epithemia ocellata (Ehr.) Kütz. (Bacillariophyceae) from China

The species of Epithemia ocellata (Ehr.) Kütz. from Northeastern China were observed by scanning electron microscopy (SEM). The studies on silica valve formation in different stages were made. At the early stage, a Y-shaped raphe sternum was found. Areolae were made from virgae and vimines. In immature valves, the canal formation before the raphe fissure is visible. The raphe system, virgae and vimines (areolae) might be the early siliceous elements of the valve during morphogenesis. The formations of virgae and vimines are similar to that of Gephyria media W. Arnott. Rows of silica papillae formed gradually on the face of the valve. After the areolae were covered with silica and form rows of papillae, the outer valve surface could become mature. Details of the internal costae were observed in mature valves.     

2009-2013年普里兹湾表层水体中生物硅含量的年际变化及其与全球气候事件的关系

利用中国南极科学考察期间获得的颗粒物样品,对南大洋普里兹湾海域水体中生物硅的含量分布及年际变化情况进行了分析。研究结果显示:在2013年夏季普里兹湾表层水体中生物硅含量在0.38—8.62μmol/dm3之间变化,平均为1.55±1.86μmol/dm3。生物硅在67°S以南湾内区域表层水体中的含量明显高于67°S以北的湾外区域,最大值出现在普里兹湾陆架区,生物因子是表层水体生物硅含量分布的主控因子。根据不同年份即25、26、27、28、29次南极科学考察期间获取的数据研究显示,普里兹湾表层水体中生物硅含量存在明显的年际差异。历史数据分析结果表明,气候事件对普里兹湾海冰变化有明显的影响,因而对相应年份该海域浮游植物数量和种群结构也会产生一定的影响,从而导致表层水体中生物硅含量的年际差异。     

基于电子鼻的青蛤(Cyclina sinensis)软组织多氯联苯的快速检测方法研究

为建立一种简单快捷的水产品中多氯联苯(PCBs)检测方法,本研究应用电子鼻对青蛤(Cyclina sinensis)软组织中富集的多氯联苯进行检测,并采用HS-SPME-GC-MS(顶空固相微萃取-气质联用)对结果进行了验证。首先利用电子鼻制作PCB15浓度梯度模版,检测PCB15处理72h以及144h的青蛤软组织中残留量,采用LDA和PCA两种方法统计并同模板的浓度进行比较。结论:青蛤软组织中PCB15浓度能明显分开,并随着处理时间的延长,区分效果愈加明显,区分度愈大。PCA的分辨效果明显优于LDA。运用欧氏距离、马氏距离、判别函数法和相关性对含有PCB15的样品浓度分别进行鉴别和验证,四种方法总的鉴别率均达到90%以上,能够较准确地对样品进行验证。电子鼻检测青蛤软组织中的多氯联苯的最低检测限为0.05μg/L,GC-MS为0.5μg/L。     

粤西沿海一次赤潮事件的三维观测

From November 24 to 26, 2014, a red tide event occurred in the offshore water off the Hailing Island located at the western Guangdong coast. The red tide appeared as pink strips distributed within 3 km in the offshore water and extended for about 10 km along the shoreline. During the flood tide, the pink seawater rushed to the beach with breaking waves, forming foam strips on the beach. Guangdong Province Key Laboratory for Coastal Ocean Variation and Disaster Prediction Technologies, Guangdong Ocean University, emergently responded to the event and organized three-dimensional observations from the air, onboard and on beach. The preliminary analyses of the cruise data and water samples indicate that the event was induced by nontoxic Noctiluca scintillans, of which the concentration reaches as high as 4 200 cells/L near the surface and 2 600 cells/L at the bottom.     

在大洋环流模型中对应于惯性内波破碎的垂直混合的一个参数化方案

Based on the theoretical spectral model of inertial internal wave breaking(fine structure) proposed previously, in which the effects of the horizontal Coriolis frequency component f-tilde on a potential isopycnal are taken into account, a parameterization scheme of vertical mixing in the stably stratified interior below the surface mixed layer in the ocean general circulation model(OGCM) is put forward preliminarily in this paper. Besides turbulence, the impact of sub-mesoscale oceanic processes(including inertial internal wave breaking product) on oceanic interior mixing is emphasized. We suggest that adding the inertial internal wave breaking mixing scheme(F-scheme for short) put forward in this paper to the turbulence mixing scheme of Canuto et al.( T-scheme for short) in the OGCM, except the region from 15°S to 15°N. The numerical results of F-scheme by using WOA09 data and an OGCM(LICOM, LASG/IAP climate system ocean model) over the global ocean are given. A notable improvement in the simulation of salinity and temperature over the global ocean is attained by using T-scheme adding F-scheme, especially in the mid- and high-latitude regions in the simulation of the intermediate water and deep water. We conjecture that the inertial internal wave breaking mixing and inertial forcing of wind might be one of important mechanisms maintaining the ventilation process. The modeling strength of the Atlantic meridional overturning circulation(AMOC) by using T-scheme adding F-scheme may be more reasonable than that by using T-scheme alone, though the physical processes need to be further studied, and the overflow parameterization needs to be incorporated. A shortcoming in F-scheme is that in this paper the error of simulated salinity and temperature by using T-scheme adding F-scheme is larger than that by using T-scheme alone in the subsurface layer.