乌鲁木齐冬季黑碳气溶胶污染特征初步研究

利用2010年2月乌鲁木齐大气成分观测站黒碳仪观测数据,结合散射系数及常规观测资料,对乌鲁木齐冬季黑碳气溶胶浓度变化特征进行了分析,并通过气流后向轨迹进行了来源分析。结果表明：(1)观测期间BC质量浓度日平均值为12707±4673 ng.m-3,浓度变化范围为4916~22997 ng.m-3,散射系数日均值为1086±561Mm-1,变化范围为350~2232 Mm-1。BC质量浓度和散射系数日均值变化趋势基本一致;(2)BC质量浓度日变化具有明显的峰值和谷值,峰值分别出现在9~11时和20~22时,谷值分别出现在4~6时和16~18时,散射系数与BC质量浓度日变化趋势基本一致,相对其有一定的滞后。春节期间燃放烟花爆竹对空气污染物浓度上升有明显作用,显著影响BC质量浓度日变化规律;(3)乌鲁木齐冬季大气层结稳定,污染物不易扩散,风速和降水对黑碳气溶胶浓度具有明显的稀释作用。在乌鲁木齐特殊的地形和气象条件下,本地源排放与来自周边城市群污染物输送的叠加使得污染更加严重。     

塔克拉玛干沙漠沙垄起伏地形夏季地表温度差异特征

摘 要：开展塔克拉玛干沙漠沙垄起伏地形夏季地表温度观测试验,旨在为塔克拉玛干沙漠环境陆面过程研究提供科学依据。2019年6月7日至9月2日在塔中地区,沿沙垄迎风坡以及背风坡底部、中部、上部、顶点及垄间谷地共设8个地表温度观测点。结果表明：（1）夏季沙垄地表温度最高温出现在垄间谷地,为74.63 ℃,最低温出现在迎风坡底部,为10.52 ℃;地表温度一天中在7:00左右达到最低,15:00左右达到最高。（2）晴天、多云以及浮尘天各观测点地表温度日均变化曲线呈单峰型,降水、扬沙及沙尘暴天呈双峰型;地表温度的最高温与日均值最大值均出现在晴天的垄间谷地,地表温度的最低温及日均值最小值均出现在降水天的迎风坡底部。（3）沙垄顶点与两个底部最大温差范围是顶点与背风坡底部在晴天的温差范围,为0～18.62 ℃,最小温差范围是顶点与迎风坡底部在降水天的温差范围,为0.01～6.18 ℃;迎风坡和背风坡在晴天地表温度温差范围最大,为0.01～16.93 ℃,在降水天温差范围最小,为0.01～4.15 ℃;顶点与两个底部夏季综合温差范围在0～18.62 ℃,迎风坡与背风坡夏季综合温差范围为0～16.93 ℃。塔克拉玛干沙漠地表温度受典型天气影响变化类型多样,沙垄顶点与底部、迎风坡与背风坡地表温度差异受风力及地形作用明显。     

区域集合预报增长模繁殖扰动方法研究

在建立区域AREM模式增长模繁殖(Breeding of Growing Modes,BGM)集合预报系统的基础上,设计了静态扰动(初始随机扰动、扰动限定)和动态扰动方法,利用2008年7月20日强降水个例,分析了不同类型扰动对强降水预报的影响.结果表明,静态和动态扰动都对中尺度暴雨预报具有积极的作用,扰动都不同程度地...     

空间变异对海洋叶绿素a质量浓度遥感产品精度验证的影响

海洋叶绿素a质量浓度遥感产品是海洋初级生产力与海洋生态系统固碳能力研究的重要数据源,为了保证数据的可靠性,对遥感产品进行精度验证以及验证误差的成因分析尤为重要.遥感产品的验证过程中,由于空间变异的存在,使得遥感像元尺度内的实测数据具有不同的离散程度和统计分布特征,并由此产生了不同的误差统计结果.本文选择MODIS-Aq...     

福建沿岸海域浒苔藻类的营养成分含量与食用安全

对福建沿岸海域浒苔（Enteromorpha）样品的主要组成成分、氨基酸、脂肪酸、矿物质含量的研究表明,浒苔属高膳食纤维（49．0％～59．1％）、高蛋白质（19．60％～38．24％）、低脂肪（0．20％～0．55％）的藻类．浒苔中17种氨基酸总量（Ctaa）与蛋白质含量的比值为74．1％～91．0％;其必需氨基酸含量（Ctaa）占C11从的35．4％～40．0％,CⅢ与非必需氨基酸含量（C。Ⅲ）之比为0．55～0．67,且呈味氨基酸的含量丰富（47．1％）,氨基酸组成均衡．浒苔油脂中脂肪酸组成丰富,n一3PUFA含量达油脂总量的20．0％～26．4％,其中含有EPA、DHA．浒苔中矿物质含量较高,尤其富含镁、钙、铁、锌、硒、钾等人体必需矿物元素．有害元素测定结果表明,中、低潮区浒苔的铅、汞、镉、砷含量均能够符合《无公害食品海藻》安全指标的限量要求,养殖区、高潮区部分浒苔的Pb含量超标．研究结果认为,在低污染海区生长的浒苔是一种高蛋白质、高膳食纤维、低脂肪、矿物元素丰富且安全的海洋食品．     

GPM卫星降水数据在沿海地区的适用性分析——以三亚市为例

选取2016年1—12月GPM(Global Precipitation Measurement)卫星的IMERG月尺度降水数据为研究对象,以同时期的气象站点实测降水数据为参考,利用相关系数、标准偏差、相对误差等多种统计分析指标对其在沿海地区估测能力进行评价。结果表明:IMERG月尺度降水量与站点实测降水数据相关性较好,IMERG估测的降水与气象站点实测降水量的时空变化规律也较为一致,但是量化到具体数值而言,其对山区、海岛站的估测能力不及地势平坦的区域;同时,选取降水个例对IMERG日尺度和半小时尺度降水数据的分析表明,日尺度IMERG估测的不同等级降水量也存在偏差,半小时尺度IMERG降水数据对海岛站的降水估测偏高。总体而言,IMERG降水数据对降水的时间变化规律和空间分布格局估测较为合理,但是对山区、海岛地区,其降水估测值还存在偏差,在今后应用中需结合地形特征加以合理利用。     

土地利用现状和规划数据建库容差浅析

通过对第二次全国土地调查(以下简称"二调")和土地利用总体规划数据建库过程中误差的产生和传播分析,通过误差理论和容差设置实际研究。提出现行数据建库容许误差(以下简称容差)设置不合理,设置过高引起大量无用的数据处理工作。建议合理设置容差参数,提高数据库建设和更新效率。     

AN EXPERIMENTAL STUDY ON THE PROCESS OF INTERGRANULAR PRESSURE SOLUTION OF PLAGIOCLASE GOUGE UNDER HIGH TEMPERATURE AND PRESSURE: METHOD AND PRELIMINARY RESULTS

To understand the mechanism of lower-crust earthquake and slow slips, it is necessary to study the frictional properties of mafic rocks and their major rock-forming minerals. Previous studies have performed a series of experimental researches on gabbro, basalt and their major constituents. According to the results of previous experiments, frictional sliding of plagioclase under hydrothermal conditions(100~600℃)shows a property of velocity weakening, and the experimental results show that both the direct rate effect parameter(a)and the healing effect parameter(b)increase with temperature, a typical feature for thermally-activated processes. Velocity weakening means property of a shear band that has a stronger friction healing effect than the direct rate effect in the rate and state friction constitutive framework, and the healing effect(b value)in constitutive relation mainly reflects the increase in contact area with time under hydrothermal conditions, with some minor effect of structural changes. Since the microphysical mechanism of feldspar minerals at the contacts is mainly brittle cataclasis for temperatures below 600℃, the significant frictional healing effect in this case can only be explained by the mechanism of pressure solution. In order to determine if the dissolution process of plagioclase actually occurs on the laboratory time scale, we conducted hydrostatic experiments on plagioclase powder samples under hydrothermal conditions whereby frequent contact switch between particles seen in frictional sliding experiments can be avoided, making the observation on the dissolution sites possible. Experimental temperatures were 400℃ and 500℃, with confining pressure of 90~150MPa, pore pressure of 30MPa, with 2mm initial thickness of fault gouge. The mechanical data show that a creep process occurred in the plagioclase fault gouge in the experimental temperature and pressure range; and the microstructures of the experiment show that precipitation of new grains is prevalent as the product of pressure solution process between plagioclase particles. At the same time, it is observed that the contact points have an appearance similar to fused, fuzzy structure as signatures of dissolution. The results of our experiments provide a definite experimental evidence for the healing mechanism in friction of plagioclase and for the theoretical relation between unstable slip and the pressure solution process. The results of the experiments are summarized as follows: (1)Drainage rate of pore water in plagioclase gouge was high in the first few hours of experiment, but gradually decreases over time for both temperature and pressure series of experiments slowing down to a steady state. This feature indicates that there is a creep process that evolves inside the plagioclase gouge. In the temperature-series experiments, the drainage rate of the pore water in the plagioclase gouge at 400℃ is relatively low than the cases for higher temperatures. Thus, the applied temperature is positively correlated with the creep of plagioclase gouge. (2)Scanning electron microscopy(SEM)observations of the experimentally deformed samples were performed on thin sections cut along the sample axis. Firstly, from the images of microstructure, it was found that the degree of particle fracture became more significant at a higher effective pressure, with smaller pore volume between particles. In the temperature-series experiments it was found that the degree of compaction of plagioclase gouge increased with increasing temperature. Precipitation of plagioclase grains in layered structures was generally observed in high-magnification images, indicating the presence of pressure solution processes. Contact points were also found to be in a state of ambiguity that seems to be a fused morphology, but the details of the structure remain to be determined by further observations. The above results indicate that the pressure solution process of plagioclase particles can occur on a typical laboratory time scale, and the results of this study provide robust experimental evidences for the theory that links between pressure solution and the mechanism of frictional healing and unstable slips for plagioclase.     

我国村镇砌体房屋震害分析与抗震加固研究进展

大多数震害都发生在抗震设防较薄弱的村镇地区,以村镇民居最常见的砌体结构形式为例,通过分析其建造特点、震害特征及抗震现状,指出了村镇砌体房屋抗震性能差的主要原因。参考中国砌体结构研究方面的相关文献,对增强砌体农居抗震性能的构造措施与加固方法提出了几点建议,并展望了今后加强砌体农居抗震性能的后续研究方向。     

微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。