青海祁漫塔格地区斑岩铜矿的成矿条件和远景

文章对青海祁漫塔格地区斑岩铜矿成矿带的成矿地质条件进行了研究,其形成于造山带汇聚阶段中后期的活动陆缘环境,与驱龙斑岩铜矿对比具有相类似的成矿地质条件,找矿远景很大.特别是卡而却卡、乌兰乌珠尔、鸭子沟、尕怒大门等地区具有斑岩铜矿成矿的广阔前景,有希望找到新的大型超大型铜矿床.通过对乌兰乌珠尔矿床的解剖,该矿区构造裂隙发育,岩石蚀变强烈.具典型的"斑岩型"蚀变分带:由中心向外依次为强硅化带??硅化钾化带??绢英岩化带??青磐岩化带.成矿元素以铜为主,伴有铅、锌、锡等多种有用组分.岩浆岩、热液蚀变作用、热液运移和矿质沉淀的构造空间控制了矿床的产出.为进一步在该区找矿指明了方向.     

PSO-RBFNN模型及其在岩土工程非线性时间序列预测中的应用

岩土工程受力变形演化是一个典型的非线性问题,其演化的高度非线性和复杂性,很难用简单的力学、数学模型描述,但可用粒子群优化径向基神经网络对岩土工程应力、位移非线性时间序列进行动态实时预测。网络径向基层的单元数通过均值聚类法确定后,所有其它参数：中心位置、形状参数、网络权值,均通过粒子群优化算法在全局空间优化确定。工程实例应用表明,该模型预测结果准确、精度高,有良好的应用前景。     

力马河镍矿Re-Os同位素研究

四川力马河镍矿是峨眉山大火成岩省一个重要的岩浆硫化物矿床。本文通过对其主要岩、矿石类型Re、Os及其同位素组成的分析,综合探讨了成矿岩体原始岩浆性质、矿石硫化物成因、成矿机制及Re-Os同位素等时线年龄。结果表明,力马河镍矿不同类型岩矿石样品初始Os同位素组成是不均一的,富硫化物的网脉状矿石及其选纯硫化物Os同位素组成初值差异较小,其等时线年龄为265±35 Ma、与岩体锆石SHRIMP年龄263±3 Ma基本相当;硫化物含量较低的岩、矿石样品间初始Os同位素组成差异较大,其表观等时线年龄大于成矿年龄。分析认为,岩矿样品初始Os同位素组成的不均一是由含较高放射成因187Os丰度的硫化物熔体和含较低放射成因187Os丰度的硅酸盐熔体不同比例混合造成的。混合模型分析表明,硫化物含量超过30％的矿石样品初始187Os/188Os基本接近,硫化物含量低于30％的岩矿石样品初始187Os/188Os随硫化物含量上的不同差异很大,为岩浆硫化物矿床Re-Os等时线年龄可能出现多组年龄解的现象提供了一种可能的解释。成矿岩体中含放射成因187Os丰度最低的岩石样品γOs（t=260Ma）在5左右、Cu/Pd比值在7000左右,表明是基本没有受到地壳混染及硫化物熔离影响的原始岩浆结晶分异产物,估计原始岩浆Os含量在1×10－9左右,为苦橄质岩浆。矿石硫化物Re/Os比值显著高于任何赋矿橄榄岩,γOs（t=260Ma）高达110左右,综合分析揭示了力马河镍矿硫化物为二次熔离成因,模式分析认为,矿石硫化物是由原始岩浆经历R=2000左右的硫化物熔离后、其亏损岩浆再经R=200左右的硫化物熔离形成,与二次熔离相对应,成矿岩浆也经历了两次混染作用,分别为上、下地壳7％左右的混染。     

Simple models for dynamic melting in an upwelling heterogeneous mantle column: Analytical solutions

Several lines of evidence suggest that the melt generation and segregation regions of the mantle are heterogeneous, consisting of chemically and lithologically distinct domains of variable size and dimension. Partial melting of such heterogeneous mantle source regions gives rise to a diverse range of basaltic magmas. In order to better assess the role of source heterogeneity during mantle melting, we have undertaken a theoretical study of trace element distribution and fractionation during concurrent melting and melt migration in an upwelling, chemically heterogeneous, two-porosity double lithology melting column. Analytical solutions for the abundance of a trace element in the matrix and channel were obtained under the assumptions that the porosity, melt and solid velocities, and solid-melt partition coefficients are constant and uniform. For simplicity, we neglected diffusion and dispersion in the melt. Chemical source heterogeneities of arbitrary size and shape were integrated into the simple melting models by allowing trace element abundance in the source region to vary as a function of time and space. Concurrent melting and melt migration in an upwelling heterogeneous mantle may be approximated as a quasi-steady state problem in which time-dependent concentration patterns produced by melting of heterogeneous source regions are superimposed on a reference steady-state concentration distribution established by melting of the ambient or background mantle. Chromatographic fractionation is especially important for the matrix melt and solid when chemical heterogeneities are involved during melting and melt migration in the mantle, giving rise to significant phase-shift between two incompatible trace elements in the matrix melt and scattered correlations among incompatible trace elements in residual peridotites. Mixing is the chief mass transfer process in the dunite channel where the chromatographic effect is negligible for most of the incompatible trace elements. The lack of chromatographic fractionation among incompatible trace elements and isotopic ratios in MORB suggests either most MORB are channel melts or mixing in magma conduit and chamber is very efficient such that the phase-shift is averaged out during magma transport and storage processes. Advection brings melt produced by smaller-degree of melting in the deeper part of the melting column to the overlying melting region, increasing the incompatible trace element abundance in the matrix and the channel. This advection-induced self-enrichment is especially important when heterogeneous sources are involved and may account for some of the enriched incompatible trace element patterns observed in residual peridotite that were previously interpreted to be a result of mantle metasomatism. Systematic studies of high-resolution spatially correlated mantle samples may help to constrain the melting history and the size and nature of chemical heterogeneities in the mantle.     

基于残余强度修正的岩石损伤软化统计本构模型研究

岩石随着围压的增大,残余强度的增加幅度比峰值强度大,残余强度逐渐成为影响岩石全应力-应变曲线峰后段的主要因素,因此,建立岩石损伤软化统计本构模型时,对残余强度进行修正是非常必要的。基于岩石应变强度理论以及岩石微元强度服从Weibull随机分布的假设,考虑岩石峰后残余强度对损伤变量进行修正,在微元破坏符合Hoek-Brown屈服准则条件下,建立了能够反映岩石峰后软化特征的三维损伤统计本构模型;依据岩石试验全应力-应变曲线的几何特征,推导出本构模型参数的数学表达式,并基于花岗岩室内试验数据对模型参数进行探讨,研究了Weibull分布参数与本构模型的关系,探讨了损伤修正系数的取值和岩石累积损伤的扩展过程;将建立的本构模型理论曲线与4种岩石（斑状二长花岗岩、细晶大理岩、砂岩和粉砂质泥岩）不同围压下的常规三轴压缩试验曲线进行对比分析,结果表明,该模型能很好地描述岩石破裂过程的全应力-应变关系和表征岩石残余强度特征。这对于岩石损伤软化问题以及岩石加固处理措施的研究均具有重要的意义。     

Late Mesozoic compressional to extensional tectonics in the Yiwulüshan massif,NE China and their bearing on the Yinshan–Yanshan orogenic belt: Part II: Anisotropy of magnetic susceptibility and gravity modeling

Granitoids play an important role in deciphering both crustal growth and tectonic evolution of Earth. In the eastern end of the Yinshan–Yanshan belt of North China Craton, the Yiwulüshan massif is a typical region that presents the tectonic evolution features of this belt. Our field work on the host rocks has demonstrated two phases of opposite tectonics: compressional and extensional, however, the deformation is almost invisible in the intrusive rocks. To improve the understanding of the tectonic evolution of the Yiwulüshan massif and the Late Mesozoic tectonics of East Asia, a multidisciplinary study has been carried out. In this study, anisotropy of magnetic susceptibility (AMS) and gravity modeling have been applied on these Jurassic plutons (Lüshan, Jishilazi and Guanyindong), which intrude into the Yiwulüshan massif. According to laboratory measurements and microscopic observations on thin sections, the AMS of the Yiwulüshan massif is characterized by secondary fabrics, indicating that the intensive post solidus deformation has reset the (primary) magmatic magnetic fabrics. A relatively gentle NW dipping magnetic foliation has been identified with two distinct groups of magnetic lineations of N34°E and N335°E orientations, namely L_M1 and L_M2, relatively. Gravity modeling reveals a southward thinning of the massif with a possible feeding zone rooted in the northern part of the massif. Integrating all results from structural observation, geochronological investigation, AMS measurement and gravity modeling, two tectonic phases have been identified in the Yiwulüshan massif, posterior to the Jurassic (180–160 Ma) magmatism in the Yinshan–Yanshan area. The early one concerns a Late Jurassic–Early Cretaceous (~ 141 Ma) compressional event with a top-to-the-south to southwest sense of shear. The second one shows an Early Cretaceous (~ 126 Ma) NW–SE ductile extensional shearing. At that time, sedimentary basins widened and Jurassic plutons started to be deformed under post solidus conditions. In fact, the NW–SE trend of the maximum stretching direction is a general feature of East Asian continent during Late Mesozoic.     

工程岩体三维构模中钻孔数据处理方法

原始数据处理是工程岩体三维构模中存在的主要困难之一。从三维构模的角度,将工程岩体按几何特征抽象为4种结构单元类型。钻孔数据是描述工程岩体的重要原始数据,具有多尺度性。针对这个特点,提出钻孔数据纵向概化准则,解决工程岩体多尺度显示问题;根据地质学的地质数据解译方法,结合岩层层状分布的特点,提出层处理方法对钻孔数据进行概化处理,确定工程岩体所对应的结构单元类型,创建工程岩体结构单元三维构模数据,建立由钻孔数据所得到的工程岩体三维模型。     

铜陵地区中生代中酸性侵入岩的地球化学特征及其成矿-地球动力学意义

本文对铜陵地区晚侏罗世-早白垩世高钾钙碱性中酸性侵入岩进行了研究,发现该类岩体具有埃达克岩的地球化学特征,具体表现为:SiO2≥56％,Al2O3含量高(>15％),Na2O/K2O>1,亏损HREE,(La/Yb)N>12,负Eu异常不明显(Eu*/Eu=0.71-0.96),Sr含量高(>750μg/g),Sr/Y比值高(>38)。但是,由于岩石的K2O含量较高、εNd(t)较低和ISr值较高,又不同于典型的与板块俯冲有关的埃达克岩,而与中国东部中生代的C型埃达克岩比较类似,暗示铜陵地区的高钾钙碱性岩可能是加厚的下地壳底部基性岩部分熔融的产物。本文主要依据铜陵埃达克质岩的HREE特征,将其分为三类:第一类岩体为HREE平坦型,Yb含量较高(>1.8μg/g);第二类为HREE平坦型,Yb<1.8μg/g,(Ho/Yb)N≈1;第三类岩体HREE亏损,Yb<1.8μg/g,(Ho/Yb)N<1.2。上述三类岩石地球化学性质上的差异不太可能是分离结晶作用或地壳混染的 结果,而可能是由于幔源岩浆与下地壳物质混合的程度不同引起源区成分不同形成的。铜陵地区及中国东部埃达克质岩石可能代表了中国东部中生代时的地壳增生和加厚过程。铜陵埃达克岩主要是古老下地壳和底侵玄武岩不同比例混合部分熔融形成的,在岩浆演化过程中可能还不同程度地叠加了分离结晶作用和岩浆混合作用的影响。铜陵埃达克岩具岛弧特征,但并不表明其     

凤太矿集区金铅锌矿地球化学特征及找矿方向

通过对金、铅锌矿成矿规律和地球化学特征的研究,讨论陕西凤太矿集区今后的找矿方向,并初步圈定了4处找矿靶区.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.