中国沿海星虫动物门名录

取1980～1989年间在我国沿海进行星虫动物区系调查的标本和有关资料做了整理、鉴定,共39种,分隶于2纲,4目,6科,12属。其中1种在我国为首次记录。     

FINITE ELEMENT METHOD IN CALCULATION OF KUROSHIO CURRENT

We establish the equations of finite element approximation for three-dimensional ocean current and calculate the Kuroshio current in the eastern sea area off Taiwan Province. The interpolation error of finite element approximation is given as Eq. (3. 14).     

Simulations of Annual Cycle of Phytoplankton Production and the Utilization of Nitrogen in the Yellow Sea

A nutrient dynamic model coupled with a 3D physical model has been developed to study the annual cycle of phytoplankton production in the Yellow Sea. The biological model involves interactions between inorganic nitrogen (nitrate and ammonium), phosphate and phytoplankton biomass. The model successfully reproduces the main features of phytoplankton-nutrient variation and dynamics of production. 1. The well-mixed coastal water is characterized by high primary production, as well as high new production. 2. In summer, the convergence of tidal front is an important hydrodynamic process, which contributes to high biomass at frontal areas. 3. The evolution of phytoplankton blooms and thermocline in the central region demonstrate that mixing is a dominant factor to the production in the Yellow Sea. In this simulation, nitrate- and ammonium-based productions are estimated regionally and temporally. The northern Yellow Sea is one of the highly ranked regions in the Yellow Sea for the capability of fixing carbon and nitrogen. The annual averaged f-ratio of 0.37 indicates that regenerated production prevails over the Yellow Sea. The result also shows that phosphate is the major nutrient, limiting phytoplankton growth throughout the year and it can be an indicator to predict the bloom magnitude. Finally, the relative roles of external nutrient sources have been evaluated, and benthic fluxes might play a significant role in compensating 54.6% of new nitrogen for new production consumption.     

海洋环流模式中不同近似假设下的海表高度

Boussinesq近似是现代海洋环流模式中经常采用的假设，但随着海洋模式的不断发展完善以及气候研究应用的需要，有必要估算Boussinesq近似造成的模式误差。分别利用一个非Boussinesq近似的海洋模式与另一个结构相同且采用Boussinesq近似的模式计算海表高度，并同时利用模式预报的温度、盐度资料计算了比容异常高度。分析结果显示，这3种不同定义的海表高度无论空间结构，还是时间演变，都基本类似，尤其在热带海区最接近，差值≤1cm。Boussinesq近似意味着在模式中以体积守恒代替质量守恒，通常的做法是对其进行简单的质量补偿来保持质量守恒。比较说明，以质量补偿方法进行的高度订正对减小Boussinesq近似带来的误差没有本质的意义。     

筒型基础沉贯阻力估算方法

系统地总结国外有代表性工程实践对筒型基础沉贯阻力的研究 ,并将各种方法综合起来 ,提出了加权综合估算法 ,供今后的研究和工程实践参考     

西太平洋暖池变异及其对西太平洋次表层海温场的影响

应用热带太平洋上层XBT温度资料,分析研究了西太平洋暖池区(0°～16°N,125°～145°E)上层海洋的变化特征以及与西太平洋次表层海温场之间的关系.研究表明,西太平洋暖池区的垂向温度存在显著的年际变化,尤其在次表层(120～200m)的变化最为明显.西太平洋暖池区的次表层冷暖信号明显早于西太平洋次表层的海温异常.分析发现,西太平洋暖池区的海温异常是导致整个西太平洋次表层海温场变异的关键区,当西太平洋暖池区的次表层冷暖信号加强时,3～4个月后西太平洋海温场出现大范围的冷暖异常.     

富钴结壳分布的分形特征

利用我国在西太平洋国际海底两个海山获得的富钴结壳资料进行分形研究后发现，富钴结壳的分布具有变维分形分布的特点，结壳丰度呈二阶累计和分形分布，结壳厚度呈多阶不定累计和分形分布，通过计算得到了它们各自的分维数，进而对两个海山的结壳资源进行了初步评价。     

舟山沿海单齿螺（Monodonta labio）种群的年龄结构,生物量与生长特征

本文报导了采自舟山沿海单齿螺种群的年龄结构、生物量与生长。自然种群的单齿螺年龄组成以１＾＋和２＾＋龄占优势，壳高、壳宽、壳口高、厣径、体重等生长参数的回归关系良好，单齿螺的生长完全可以用壳高来表示。单齿螺以第一、二年生长最快。采捕季节可定在四、五月间，采捕规格应在壳高１６ｍｍ以上。     

南海上层海洋热含量的年际和年代际变化

分析了1959—1988年南海表面至100m垂直平均温度（TAV）资料，结果表明：南海上层海洋热含量存在明显的准两年、4—5年和年代际振动。在E1Nino年，南海上层热含量显著增加。50年代末至70年代初，南海TAV为负距平，此后转为正距平。南海TAV的变化与ENSO事件、东亚冬季风和热带大气环流的变异密切相关。     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.