灌注桩钢筋笼内部的磁异常特征

通过分析有限长直立圆柱体内部的磁异常特征,结合模型桩试验,研究了灌注桩钢筋笼内部的磁异常特征,结果表明在钢筋笼内部钻孔中的磁异常Za 垂直分量总体上呈现"两峰夹一谷"的特征,钢筋笼中部呈宽缓的马鞍形负异常,钢筋笼底端位置对应磁异常从极小值转变为极大值的拐点,相应梯度曲线出现极大值.     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。     

安徽省廖家地区地质地球化学特征和构造地球化学找矿

通过对安徽祁门廖家地区矿区进行1：1万地质调查工作与1：1000地质剖面测量工作,认识和总结了廖家地区出露的地层岩性组合及其沉积特征,确定了矿区的基本构造格架、主要控矿构造及其演化历史。在此基础上,运用构造地球化学方法进行了找矿研究。因子分析及对应分析表明,上溪群及石英脉均富集铁族元素组合Cr、Ni、Co、V、Ti,反映其组成上具有一定的亲源性;石英脉中Au、As元素组合相关性强,As可能作为成矿介质参与金的成矿作用。利用分形理论,对不同地质体金含量的分形结构特征进行了研究。因子得分等值线图表明,几因子（Cr、Ni、V、Ti、Co）得分高值区与岩浆岩分布范围一致。成矿元素因子得分高值区明显受北东向与近东西向构造控制。显然东西向断裂是下一步金矿找矿的重点区段。本区的金矿类型为受断裂控制的含金石英脉型与层间破碎带型。上溪群可能是本区金矿的成矿物质来源,而岩浆岩主要提供热源,构造既作为成矿作用,也提供了有利的成矿环境和聚矿空间。     

Geochemical characteristics and source analysis of inflow of mine water in Wang’ershan Gold Mine, Shandong

Through a systematic observation of water level and temperature, and a comprehensive analysis of the data on major/trace elements, nitrite, hydrogen-oxygen isotopes, the conclusion has been drawn that there are two relatively independent groundwater systems (cool water and hot water), and the geochemical indicators of hot/cool waters are described. The cool water system is relatively enriched in Ca2 , Mg2 and HCO3-. Its TDS is relatively low, about 1400–1800 mg/L. The hot water system is relatively enriched in K , Na , Cl- and SO42-. Its TDS is relatively high, about 2200–2300 mg/L. The cool water system is enriched in Ba, Ga, Cd, and the hot water system is enriched in B, Ti, Cr, Ni, Cu, Mo, Rb, and Cs, relatively. Especially, the contents of Rb and Cs in the hot water system are more than five times as high as those in the cool water system. The NO3- contents of cool water discharged from the gold mine are relatively high, and those of hot water are extremely low. The δD and δ18O values follow an increasing order of surface water>mine cool water>mine hot water. The cool water comes mainly from the lateral supply of phreatic water, while the hot water comes mainly from the vertical supply of deeply circulating structure-fracture water. The ratio of cool water over hot water was estimated to be about 1:1 by a water quality model..     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

川西南周公山及邻区下二叠统碳酸盐岩成岩作用对储集性的影响

川西南周公山及邻区下二叠统的中-低孔、中-低渗碳酸盐岩储层的储集空间以次生成因的溶孔、溶洞和构造裂缝为主.研究认为,多世代方解石胶结、化学充填作用以及埋藏期的压实(溶)作用是孔隙很难得到保存的主要原因;同生-准同生期的混合水云化作用和表生期、埋藏期的流体溶蚀作用则产生了大量的次生溶孔、洞,使储层的孔渗性得到明显的改善;构造破裂作用可以产生新的储集空间,还影响各储集体之间及单一储集体内部空隙的连通.成岩相分为混合水云化-溶蚀-破裂相、溶蚀-胶结相和胶结-压实-压溶相.各种成岩作用的叠加形成了现今下二叠统油气储层的分布格局.     

广西大厂超大型锡矿的形成条件与成矿模式

超大型矿床的形成条件有其特殊性.大厂超大型锡矿产出于南丹-昆仑关基底性深大断裂带上,经过多旋回构造-岩浆活动使矿质继承叠加,最后聚积于燕山晚期的岩浆热液中.大厂超大型锡矿床是各种成矿因素良好匹配,并经长时期的多重富集综合作用的结果.     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.