10000公斤/厘米~2高压容器的研制

国家地震局地球物理研究所 本高压容器是我国第一台10000公斤/厘米~2液体围压的三轴试验容器。容器的高压腔尺寸为φ8.5吤厘米 可放置φ2.5࡫.5厘米的岩石样品及各种探头。它以9138油泵为侧向压力源 可产生0-10000公斤/厘米~2的围压 能模拟地壳深部30公里处的压力环境。与长江500型岩石三轴应力试验机配套使用 可进行岩石三轴压力破裂试验。容器简体采用了三层缩套配合结构 液压油进出口及电测导线的引出均在底座及大柱塞上轴向开孔 以免应力集中。上密封和下密封采用三角垫及密封环密封 引线密封采用锥塞及密封绝缘锥套密封。     

UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.     

1992—2007全球海平面变化

引起全球海平面变化的因素是复杂多样的，大气压、风、大洋环流以及海水密度的变化，都会引起海平面在时间、空间上的变化，而海水温度的变化是海平面变化的主要原因。该文利用法国Archiving, Validation and Interpretation of Satellite Oceanographic data（AVISO）的海表面高度异常数据，计算了1992年10月至2007年1月间，全球海平面的平均上升速度，同时详细解算海平面上升速度的全球空间分布，分析全球海平面的变化趋势并将海平面变化同美国国家海洋大气署（NOAA）的Optimum Interpolation Sea Surface Temperature （OISST）海表面温度数据进行了比对和相关分析。     

基于新经济社会学视角的海洋垃圾公众治理意愿研究

海洋垃圾污染是全球十大环境问题之一以及全球共同面临的环境挑战，也是目前中国政府优先考虑的环境事项。文章基于新经济社会学视角，采用青岛市实地调研所得的微观数据，构建海洋垃圾公众治理意愿的多维分析框架。实证结果表明：青岛市公众对海洋垃圾污染有基本认知水平，且有迫切治理需求，70.28%的受访者愿意支持海洋垃圾治理；在参与海洋垃圾治理中，公众不仅具有“经济人”的特征，而且具有“社会人”的特征；政府治理、污染认知、社会文化、关系网络均对公众治理意愿具有显著正向影响，个人的社会、经济、居住特征等自主因素也对公众治理意愿产生显著影响。     

菏泽市气候干湿特征评估以及干湿风险区划研究

为研究34年来菏泽市气候干湿状况的变化,并对该市干旱灾害进行风险区划,给市、区(县)各级人民政府防御干旱灾害风险提供理论数据支撑,指导农、林业的生产和发展。主要利用菏泽市最近34年气象站基本资料,分析菏泽市的潜在蒸散量和湿润指数变化,同时利用地理区划软件Mapinfo对该地区的干湿风险灾害进行区划分析。结果表明:(1)20世纪80年代以来,菏泽市年均潜在蒸散量和降水量水平都有所增加,但降水量的增加程度远远低于潜在蒸散量,于是湿润指数一直呈现下降趋势,年均降幅约为1.05%;(2)年均潜在蒸散量的增加主要由于气温上升和湿度下降两个因素影响,其中湿度下降对其产生的影响最大,两者正相关系数分别为0.312和0.94;(3)从时间轴上看,每年10月到次年6月为菏泽市干旱灾害多发期,尤其是每年的12月到次年4月,月平均湿润指数<0.5,为旱灾易发期;(4)目前,鲁西南8县1区中,单县的湿润程度最好,曹县、定陶、牡丹区等次之,鄄城县的湿润程度最差。     

尼泊尔Ms8.1地震前我国西藏及周边区域的重力长期变化

根据1998~2013中国地壳运动观测网络、中国数字地震观测网络工程和中国大陆构造环境监测网络流动重力观测成果,给出了中国西藏及周边地区的重力年变率分布。结合青藏高原冰川消融和高原湖泊水位变化,估算了由陆地水储量变化引起的区域重力效应。基于50km平滑半径的高斯滤波,给出了测区内15a时间尺度的重力变化空间分布,并初步探讨了尼泊尔Ms8.1地震孕育的重力场长期背景趋势变化。结果表明:1)流动重力典型测点的时间序列表现出明显的线性变化特征,表明测点附近区域的长期重力变化以线性上升趋势为主,反映了区域重力逐年累积增加的背景效应;2)中国西藏及周边区域的重力长期变化在空间分布上具有显著的不均匀性和分区现象,这与青藏高原复杂的变形构造和动力学系统密切相关。喜马拉雅活动构造带在15a时间尺度上明显呈正重力变化趋势,可能与印度板块与欧亚板块存在的持续挤压变形引起的地下物质重新分布与调整有关,反映了大震孕育过程中地壳变形和介质变化引起的震区周围应力与能量的累积。     

国外自发地理信息研究进展及对我国的启示

在内涵解析的基础上,主要从数据质量评估、贡献者分类与动机以及法律议题三方面归纳与梳理国外自发地理信息的研究情况。相比较而言,我国对自发地理信息的研究无论从深度还是广度上都处于起步阶段,未来研究应从四个方面深入开展:政府主导下的公众贡献自发地理信息;数据质量控制;移动自发地理信息以及自发地理信息涉及的法律议题。     

GNSS空间信号精度的研究分析

基于MGEX提供的产品,对当前全球卫星导航定位系统的空间信号精度分析与评估.结果表明:目前各系统的全球平均SISRE分别为GPS 0.6 m,Galileo 0.28 m,GLONASS 2.5 m,BDS-30.49 m,BDS-21.41 m;其中,Galileo最优,BDS-3次之,GPS稍低于BDS-3,另外,BDS-3 SISRE精度相对于BDS-2提升65％.     

基于地层信息插值的FLAC3D简易建模方法

为建立一种简易的FLAC3D建模方法,降低FLAC3D前处理时的建模难度,本文基于Python编程语言开发了建模文件生成程序。该程序以岩体各层位的高程信息为基础,采用Kriging插值生成离散网格点数据;并采用离散网格点自动生成建模所需要的网格数据文件;将该文件导入FLAC3D软件中,即可生成与真实钻孔数据和地层信息吻合的三维模型。程序提供了3种FLAC3D内置单元模型可供选择。该方法采用Kriging插值算法,可生成精确的三维地层模型数据。与FLAC3D软件自身的脚本建模语言相比,该方法简单快速。本文使用3类应用数据进行建模,验证提出的插值建模方法可以针对复杂的地形和地质信息生成精确的三维模型。研究成果为采用FLAC3D进行复杂地质区域数值模拟计算提供了一种简单、高效、准确的建模工具。