基于GML的多源异构空间数据集成系统的研究与设计

地理信息系统的迅速发展和广泛应用导致了空间数据多源性的产生,给数据综合利用和数据共享带来不便。多源异构的空间数据转换为统一的GML数据格式,可以在网络环境下方便有效地集成和共享,从而实现对空间数据的互操作。     

装设粘弹性阻尼器钢筋混凝土结构抗震实用分析

为了设计装设粘弹性阻尼器受控结构、推进此项技术的工程应用,分别利用粘弹性阻尼器的复刚度模型和有限元模型,编制了振型分解反应谱程序和弹性时程分析程序,并对一装设粘弹性阻尼器的16层钢筋混凝土结构和相应原结构在多遇地震下的响应进行了分析。     

能坡法流量实时在线自动监测系统在沈丘水文站的应用

能坡法流量实时在线自动监测系统结合计算机处理、网络数据传输等先进技术,可以将常规的水文要素监测方式转变为信息采集、存贮、传输运用为一体的自动化、数字化过程。通过该系统在沈丘水文站的应用,与流速仪法测流进行对比分析,从而验证了能坡法流量实时在线自动监测系统的可靠性与合理性。     

秦岭造山带多金属矿普查复杂地层护壁堵漏技术

秦岭造山带多金属矿普查项目钻探施工过程中钻遇多种复杂地层,垮塌、缩径、漏失等复杂情况频发,严重影响了施工效率。分别采用了植物胶钙处理钻井液、聚乙烯醇无固相钻井液等进行护壁工作,结合不同漏失情况分别实施了随钻堵漏、凝胶堵漏等技术措施,取得了良好的使用效果。     

分布埋入式光纤与隧道衬砌耦合性能试验及应用

为探究埋入式光纤与隧道衬砌的耦合性能,分别从理论与试验两个方面进行研究,并在实际工程中进行了验证。构建了光纤、中间体和基体结构力学分析模型,进行光纤应变传递机制理论分析,计算了光纤应变传递效率;使用钢筋混凝土梁模拟隧道衬砌,进行了2组不同加载速率的试验。其中,在同一根梁内（同一工况）设计6种光纤的布设方式,以位移控制的方式在梁跨中部位进行单点多级加载,使用BOFDA（布里渊散射光频域分析）技术分别对6条光纤进行监测。试验结果表明：6条光纤均可以有效监测梁从开始加载至钢筋开始屈服阶段,光纤与梁耦合性最好;钢筋开始屈服直至梁破坏阶段,光纤应变不再增加甚至减小或呈现出光纤断裂的状态,此过程光纤与梁耦合性较差;除开槽埋入式光纤的有效监测应变差为3 000×10?6外,其余布设方式光纤有效监测应变差为2 000×10?6;光纤在长距离（>>146 mm）埋入式布设情况下可认为其应变传递效率接近100%,2组不同试验结果呈现相似规律。在北京市新机场线地铁暗挖隧道CRD工法区间进行了工程应用研究,监测结果表明分布埋入式光纤布设工艺是可行的,可为分布式光纤技术在地下工程结构监测中的应用提供有价值的参考。     

土质滑坡格构锚杆抗滑机制及受力试验研究

通过滑坡防治格构锚固大型物理模型试验,分析了土质滑坡格构锚杆体系在坡顶荷载下的变形和位移,揭示了格构锚杆的抗滑机制,探讨了锚固力与坡体位移及锚杆变形的关系,提出了极限锚固力的计算方法。结果表明：滑坡滑动时,格构梁与坡体整体发生旋转滑移,锚杆在滑面处发生了弯曲变形,处于弯曲和轴向拉伸组合变形状态;格构锚杆的抗滑作用表现为锚杆在滑面处的抗剪抗滑和锚杆格构梁的挡土阻滑;格构锚杆的极限锚固力由初始预应力、锚杆弯曲变形引起锚拉力、坡体位移引起锚拉力三部分组成,可通过公式 计算。该研究结果可为格构锚固体系的优化设计提供一定的参考。     

基于“情景-应对”的矿井水灾事故应急决策机制

为解决矿井水灾事故应急快速反应、高效决策的现场需求,针对矿井水灾事故的不确定性、复杂性和紧迫性等特点,运用多案例分析法,解析了11起典型矿井水灾事故,提出了判别“情景”和事故“情景”两个关键概念,定义了集合{突水水源,突水通道,采掘方式,出水量,淹没范围,生存空间}为矿井水灾事故的情景,并运用AHP分析法计算了6个情景要素各自的权重。确立了“情景-应对”应用在矿井水灾应急决策领域的实现途径,详细阐述了构建情景库、案例库、对策库的方法以及“情景-应对”型矿井水灾应急决策方案的生成过程,并提出了以“黄金72小时” “8天8夜”为时间节点的多阶段矿井水灾事故应急决策机制,案例推演应用表明,该应急决策机制不仅规范了事故应急流程,而且实现了精准、快速、高效的目标。      

Mineral Deposit Model of Cu–Fe–Au Skarn System in the Edongnan Region, Eastern China

Cu and Fe skarns are the world’s most abundant and largest skarn type deposits, especially in China, and Au-rich skarn deposits have received much attention in the past two decades and yet there are few papers focused on schematic mineral deposit models of Cu–Fe–Au skarn systems. Three types of Au-rich deposits are recognized in the Edongnan region, Middle–Lower Yangtze River metallogenic belt: ~140 Ma Cu–Au and Au–Cu skarn deposits and distal Au–Tl deposits; 137–148 Ma Cu–Fe; and 130–133 Ma Fe skarn deposits. The Cu–Fe skarn deposits have a greater contribution of mantle components than the Fe skarn deposits, and the hydrothermal fluids responsible for formation of the Fe skarn deposits involved a greater contribution from evaporitic sedimentary rocks compared to Cu–Fe skarn deposits. The carbonate-hosted Au–Tl deposits in the Edongnan region are interpreted as distal products of Cu–Au skarn mineralization. A new schematic mineral deposit model of the Cu–Fe–Au skarn system is proposed to illustrate the relationship between the Cu–Fe–Au skarn mineralization, the evaporitic sedimentary rocks, and distal Au–Tl deposits. This model has important implications for the exploration for carbonate–hosted Au–Tl deposits in the more distal parts of Cu–Au skarn systems, and Fe skarn deposits with the occurrence of gypsum-bearing host sedimentary rocks in the MLYRB, and possibly elsewhere.     

基于金矿规格单元数据的机器学习方法在成矿建模分析中的应用

现代金矿勘察主要是通过综合地球化学和地质测量等数字化方法对深部矿床进行研究,所需要的人力物力成本较高。而通过分析积累的金矿规格单元数据,可以建立金矿成矿情况与相关成矿元素含量之间的非线性关系,从已有的勘查数据中寻找金矿成矿的一般规律。本文基于与金矿相关的成矿元素含量数据,分别采用逻辑斯蒂回归、随机森林和决策树方法对原始数据和重采样数据进行训练,综合运用召回率、精确率和准确率对模型进行评价。通过对比发现,在训练和测试原始数据过程中,由于每组之间数据量的巨大差距,导致成矿数据被淹没;而在训练重采样数据过程中,随机森林在召回率和准确率方面均有较好的表现,分别达到了90.63%和70.78%;并最终分析了随机森林模型中不同分类边界对于金矿成矿情况预测结果的影响。利用不同的测量指标对模型进行评价分析,使模型更适用于金矿成矿预测,可有效地提高金矿勘察的效率。     

Granite is an Effective Helium Source Rock: Insights from the Helium Generation and Release Characteristics in Granites from the North Qinling Orogen,China

Global helium(He) shortage is a challenging problem; however, the types of helium source rock and the mechanisms of He generation and release therein remain still poorly understood. In this study, in order to evaluate the potential of granite as an effective helium source rock, we collected granitic samples from the North Qinling Orogen, Central China, in the south of the helium-rich Weihe Basin. The helium generation and release behaviors in granite were studied through analysis of U and Th concentrations, EMPA images, and He and Ar concentrations and isotopic ratios extracted by crushing and stepwise heating. The results indicate that Ar has a better retention and a lower mobility than He. 3 He/4 He ratios released by crushing and stepwise heating are 0.016–0.056 RA and 0.003–0.572 RA, respectively, where RA is the atmospheric 3 He/4 He of 1.4×10-6, reflecting a crustal and radiogenic source. Helium concentrations extracted by the two ways are 0.13–0.95 ucm3 STP/g and 7.82–115.62 ucm3 STP/g, respectively, suggesting that matrix-sited He accounts for more than 98% of total helium preserved in granite. In addition, the total generated He amounts in granites are calculated based on the measured U and Th concentrations in granitic samples. Dividing the preserved He quantities by the generated He amounts, it turned out that less than 10% of He produced since the formation of the granite is preserved in the rock over geological time, suggesting that more than 90% generated He can be transferred to the Weihe Basin. Temperature and fracture are the two critical factors controlling He release. Based on the relationship between He diffusivity of granites and temperature and the He closure temperatures of a variety of U-and Th-rich minerals(27–250°C), we estimate that He can be partially released out of granite at the depths 400 m and totally released at the depths 7800 m. Fractures provide effective transfer of free He from deep source rocks to shallow reservoirs. Finally, a model on granite as an effective helium source rock is established. We suggest exploring He resources in hydrocarbon basins with granitic basement(or adjacent to granite bodies), high geothermal field, and young active fractures.