自动空中三角测量软件ISAT在生产实践中的应用

着重介绍了自动空中三角测量的软件ISAT在LOUIS测区空三中的应用以及个别问题的处理方法,并初步总结了ISAT的特点.     

POS数据与机载三线阵影像的联合平差

研究了机载三线阵影像与POS位置、姿态同步测量数据联合平差的理论方法;设计了一种描述POS测量误差的数学模型,采用改进的定向片内插模型实现了机载三线阵影像的光束法平差,并利用ADS40影像进行了单航带和区域网平差的实验.结果表明,极少量地面控制点参与平差即可有效提高POS数据的定位精度;在测区3角布设控制点可得到稳定的平差结果,平面和高程精度均优于1.7个像素.高精度的POS数据可有效控制航带模型的旁向倾斜,使得单航带摄影测量作业成为可能.     

ERDAS IMAGINE在1∶50000土壤底图纠正中的应用

目前利用ERDAS IMAGINE软件进行影像纠正的技术和工艺已日益成熟和完美。通过ERDAS IMAGINE在1∶50000土壤底图纠正中的应用,从生产的角度叙述了ERDAS IMAGINE软件在影像纠正中的关键技术问题,主要包括基础地理信息数据的处理、地面控制点的选取和控制点的判读。     

社区生活圈公共服务设施配置的空间分异分析——以大连市沙河口区为例

城市公共服务设施的配置水平直接影响到居民的生活品质。论文基于高德地图获取的地图数据,使用城市网络分析工具(Urban Network Analysis Toolbox, UNA)对大连市沙河口区内的6类公共服务设施分布进行空间分异分析,并对区内90个社区的居民出行可达设施的数量及类别进行测度,最后对各个社区进行总体评价。结果表明：① 大连市沙河口区公共服务设施空间分布不均,北多南少,呈现出“一主多次”的“廾”字形的结构,主要分布在西安路商业区周边和各个街道的次级商业区;② 居民可达设施数量空间差异大,北多南少,各街道均有1或2个区域可达设施数量较多;③ 居民可达设施类型数量存在一定差异,70%以上的住宅楼中的居民可以获得全部6类公共服务设施;④ 各社区居民可达设施总体处于差异较小的均衡状态,但仍有个别社区存在内部差异较大的现象。设施的分布、地物的阻隔和社区的封闭程度对居民获取各类公共服务设施影响较大,建议构建“设施完善、便捷可达”的15 min社区生活圈。     

辽宁沿海地区海洋经济增长质量空间特征及影响要素

在海洋经济质量转型之期,基于“认知—评价—建构—优化”理念,界定海洋经济增长质量内涵,通过中心-引力模型评价分析2000—2014年辽宁沿海地区海洋经济增长质量空间特征,构建了海洋经济增长质量模型,识别影响其空间特征的相关要素,并根据要素作用程度提出优化建议。研究发现：① 辽宁沿海地区海洋经济增长质量呈“核心—圈层”结构,形成以大连为“领头雁”的雁阵式相互继起模式;“钻石型”引力流结构促成辽宁沿海地区集中化连片发展格局;② 海洋经济增长质量空间特征主要受空间集聚效应影响,海洋资本、海洋基建和海洋产业结构成为推动海洋经济增长质量循环引力流的顺流机制,其中海洋产业结构成为影响辽宁海洋经济增长质量圈层空间集聚效应的关键流;海洋人才成为制约海洋经济增长质量循环引力流的逆流机制;③ 通过路径作用程度的象限划分,提出强化大连中心地职能,针对腹地城市定位及资源禀赋条件提出调控措施,推进沿海区域协调与一体化进程。     

基于孔隙率的延安黄土抗剪强度模型

孔隙率对黄土抗剪强度具有非常重要的影响,然而,孔隙率对黄土抗剪强度影响效果的认识并不充分。本文以陕西省延安黄土为研究对象,开展不同孔隙率的黄土直剪试验研究,探讨了孔隙率对粘聚力与内摩擦角的定量变化关系;并以此为基础,构建了基于孔隙率的延安黄土抗剪强度模型,并对其进行了验证。研究结果表明:(1)延安黄土粘聚力与孔隙率间呈幂函数变化关系;(2)延安不同孔隙率黄土内摩擦角取值呈现出两个区间,当孔隙率n≥0.4时,其内摩擦角在25±2.5°的范围内变动,而当孔隙率n<0.4时,其内摩擦角在29.5±2°的范围内变动;(3)通过分析得到了基于孔隙率的延安黄土抗剪强度模型,且该模型得到的黄土抗剪强度理论值与实测值间的误差较小,相对误差均在7%以内,具有较高的精确度。研究成果不仅能为延安黄土抗剪强度研究等提供技术支持,而且还能为该地区的工程建设等方面提供理论参考。     

Predicting the entire soil-water characteristic curve using measurements within low suction range

The soil-water characteristic curve(SWCC) is widely used in the design and evaluation in the practice of geotechnical and geoenvironmental engineering such as the slope stability under the influence of environmental factors. The SWCC has distinct features in the capillary and adsorption zones due to different physical mechanisms. Measurements of the SWCC are typically limited within the capillary zone(i.e., low suction range). It is cumbersome and time-consuming to measure the SWCC in the adsorption zone(i.e., high suction range). This study presents a simple method to predict the entire SWCC within both the capillary and adsorption zones, using measured data only from low suction range(e.g., from 0 to 500 kPa). Experimental studies were performed on a completely weathered granite residual soil to determine its entire SWCC from saturated to dry conditions. The resultant SWCC, along with the SWCC measurements of 14 soils reported in the literature, were used to validate the proposed method. The results indicate that the proposed method has good consistency with a wide array of measured data used in this study. The proposed method is easy to use as it only requires a simple parameter calibration for a commonly used SWCC model. It can be used to improve the reliability in the prediction of the SWCC over the entire suction range when measurements are limited within the low suction range.     

GIS-based landslide susceptibility mapping using hybrid integration approaches of fractal dimension with index of entropy and support vector machine

The loess area in the northern part of Baoji City, Shaanxi Province, China is a region with frequently landslide occurrences. The main aim of this study is to quantitatively predict the extent of landslides using the index of entropy model(IOE), the support vector machine model(SVM) and two hybrid models namely the F-IOE model and the F-SVM model constructed by fractal dimension. First, a total of 179 landslides were identified and landslide inventory map was produced, with 70%(125) of the landslides which was optimized by 10-fold crossvalidation being used for training purpose and the remaining 30%(54) of landslides being used for validation purpose. Subsequently, slope angle, slope aspect, altitude, rainfall, plan curvature, distance to rivers, land use, distance to roads, distance to faults, normalized difference vegetation index(NDVI), lithology, and profile curvature were considered as landslide conditioning factors and all factor layers were resampled to a uniform resolution. Then the information gain ratio of each conditioning factors was evaluated. Next, the fractal dimension for each conditioning factors was calculated and the training dataset was used to build four landslide susceptibility models. In the end, the receiver operating characteristic(ROC) curves and three statistical indexes involving positive predictive rate(PPR), negative predictive rate(NPR) and accuracy(ACC) were applied to validate and compare the performance of these four models. The results showed that the F-SVM model had the highest PPR, NPR, ACC and AUC values for training and validation datasets, respectively, followed by the F-IOE model.Finally, it is concluded that the F-SVM model performed best in all models, the hybrid model built by fractal dimension has advantages than original model, and can provide reference for local landslide prevention and decision making.     

塔北地区寒武系白云岩储层裂缝充填特征与有效性

塔里木盆地寒武系白云岩储层具有年代老、埋深大、成岩作用强烈的特征,原生孔隙几乎被破坏殆尽,有效裂缝的发育程度是决定储层优劣的关键因素。根据岩芯描述、薄片鉴定、FMI成像测井、扫描电镜、阴极发光、电子探针以及流体包裹体分析等研究手段,开展了塔里木盆地北部地区(简称"塔北地区")寒武系白云岩储层的裂缝充填特征及有效性分析。塔北地区整体裂缝发育,天山南地区与塔河地区裂缝在产状、线密度、形态以及充填特征上存在差异。天山南地区裂缝线密度与有效性均低于塔河地区,充填矿物主要为自形白云石与石英,其次为方解石、石膏与黄铁矿。充填白云石分为3期,对应的温度区间分别为70℃～90℃、90℃～110℃及110℃以上,均为地层内的成岩流体成因;充填石英分两期,第一期为黏土矿物转化蚀变形成,第二期可能为热液成因。塔河地区裂缝线密度高,有效性较好,溶蚀作用发育,是有利的勘探地区,其充填物以热液矿物组合形式出现,主要为方解石,其次为石膏、鞍状白云石、黏土矿物、沥青等,重晶石以交代白云石的形式出现。充填方解石分为4期,对应的温度区间分别为70℃～100℃、100℃～130℃、130℃～180℃及180℃以上,前3期充填为不同埋深时期地层内成岩流体成因,最后一期充填为自下部运移而来的高温热液流体成因。     

Monte Carlo simulation of scintillation crystal detector for formation element logging

Formation elements logging is a neutron gamma spectroscopy logging technique used to acquire the content of elements and minerals by recording the gamma ray produced by the reaction of neutron and elemental nucleus in the formation. It has a wide usage in discriminating complex lithology and evaluating unconventional reservoir. The Monte Carlo simulation model of formation elements logging tool is established in this paper, with which the effects of tool parameters including the material and length of the scintillation crystal and source spacing on logging responses are modeled. The results show that the energy response of LaBr_3: Ce crystal is better than others, and the detection efficiency increases with the crystal length but decrease with source spacing. The above results may be used as a reference for optimizing the tool structure design.