中强地震前山东地下流体地震前兆模糊分维特征研究

采用模糊集理论与分形理论相结合的模糊分维方法，计算山东地下流体在１９８３年菏泽５．９级地震和１９９５年苍山５．２级地震前的变化。分析结果认为，模糊分维值反映了地震前兆时序观测资料的结构变化特征，具有一定的物理意义，为从复杂的地下流体前兆观测值中提取地震异常信息提供了新的方法，但对某些台、测项而言、必须具体分析其模糊分维变化特征及其震前异常变化特征。     

MODELING STUDY ON SEDIMENTATION CONFIGURATION IN FRONT OF THE DAM AND IN THE PRESSURE CONDUIT OF BOTTOM OUTLETS BY FLUME EXPERIMENT

I.INTRODUCTIONReseri,oirsonoverloadedriverswillreachthestateofrelativeequilibriumwithcontinuousdevelopmentofsedimentation.Insuchcase,thereisdePOsitinfrontofthedam.Thereforethesiltpressureonthedambodyisconsiderablylarge.Sedimentationelevationinfrontofthedamisoneofthefactorsofcalculatingthesiltpressure.Inaddition,tokeeplong-termworkingstorageinreservoif,itisnecessarytoinstallbottomoutlets.Asthereisapressureconduitinfrontoftheoperatinggateofthebottomoutlet,thesedimelltenteredtheconduitwill…     

壳幔混染作用——下扬子区早中生代玄武岩同位素地质特征

下扬子区中生代（231Ma）玄武质火山岩全岩εNd（t）值-8.62～1.92,87Sr/86Sr 值0.7074～0.7179，206Pb/204Pb值为17.786～18.323。岩石中含有前寒武纪捕虏晶锆石。研究表明玄武质岩石可能是由亏损地幔与元古宙地壳岩石混染作用的结果。     

扬子地台钾镁煌斑岩 Nd、Sr、Pb 同位素特征

扬子地台周缘钾镁煌斑岩 Nd、Sr同位素特征介于南非Ⅰ、Ⅱ型金伯利岩和西澳与北美钾镁煌斑岩两种变化趋势之间，不同岩区间同位素组成差异反映地台周边构造性质不同，Pb同位素特征表明晚太古代地幔岩石圈具U亏损特征。     

辽西中生代火山岩岩浆成因——稀土元素配分及同位素定量模式

本文通过对辽西及邻区中生代盆地火山岩稀土元素配分特征的研究及模拟运算，探讨了其岩浆成因及过程。结果显示南北岩区岩浆成因不同，南岩区岩源为MORB地幔和长期富集型幔熔融混合而成，北岩区为MORB和近期亏损型地幔熔融混合而成。     

华南阿伦尼格世几丁虫生物地层与古生物地理

本文系统介绍了湖北宜昌黄花场及浙江常山黄泥塘剖面Ａｒｅｎｉｇ统几丁虫分布发育规律，指出华南地区Ａｒｅｎｉｎｇ统的几丁虫自下向上可划分为Ｃｏｎｏｃｈｉｔｉｎａｓｙｍｍｅｔｒｉｃａ，Ｅｒｅｍｏｃｈｉｔｉｎａｂａｃｕｌａｔａ，Ｅｒｅｍｏｃｈｉｔｉｎａｂｒｅｖｉｓ－Ｃｏｎｏｃｈｉｔｉｎａｌａｎｇｅｉ，Ｃｏｎｏｃｈｉｔｉｎａｐｉｒｕｍ，Ｒｈａｂｄｏｃｈｉｔｉｎａｔｕｒｇｉｄａ等生物带。讨论了华南地区这一时期     

电吸附找矿方法寻找隐伏金矿床的研究

电吸附找矿方法是指对采集的样品在室内特别装置中通电，并用吸附体吸附试样中电运移元素，通过这些元素所形成的异常来发现矿体的一种方法，该方法是依据野外地电提取方法的理论发展起来的，具有设备简单，成本低，工效效率高，工作条件及质量容易控制等优点。     

Geostatistical regionalization of glacial aquitard thickness in northwestern Germany, based on fuzzy kriging

In many instances hydrogeological parameters obtained by conventional methods for selected localities within an aquifer or an aquitard are not sufficient for adequate regionalization at the scale of the entire layer. Here, we demonstrate an application of the fuzzy kriging method in regionalization of hydrogeological data, in which the set of conventional, crisp values is supplemented by imprecise information subjectively estimated by an expert. It is believed that such an approach eventually may reflect the real-world conditions more closely than a traditional crisp-value approach, because the former does not impose exactness artificially on phenomena which are diffuse by their nature. Spatial interpolation was done for the thickness of one of the major aquitards (till and glaciolacustrine clay) in northwestern Germany. The dataset consists of 329 crisp values from boreholes supplemented by 172 imprecise values defined as fuzzy numbers. It is demonstrated that the reliability of regionalization was higher, compared to regionalization performed with the crisp dataset only. Fuzzy kriging was performed with FUZZEKS (Fuzzy Evaluation and Kriging System) developed at the Ecosystem Research Center at the University of Kiel.     

A note on thermomechanical anisotropy of clays

Deep clays exhibit a pronounced strain anisotropy both during mechanical loading as well as during heating and cooling at constant stress in drained isotropic conditions. During mechanical loading vertical strain is larger than the horizontal one. During heating the vertical strain is larger than the horizontal one within the elastic range; the opposite is observed in the elasto-plastic range. The above described response can be interpreted adopting a consistent rotational, kinematic hardening thermo-elasto-plastic constitutive law.     

Overview of in-situ thermomechanical experiments in clay: Concept, results and interpretation

The HADES project (High Activity Disposal Experimental Site) aims at demonstrating the technical feasibility and the long-term safety of geological disposal of reprocessed HLW (High-Level Wastes) radioactive wastes. This disposal could be realised in the Tertiary Boom clay formation below the Mol/Dessel nuclear site. Previous studies in the 80's on the geomechanical behaviour of Boom clay, at host rock temperature (15°C), have demonstrated the mining capabilities of this clay. European partners have collaborated to increase the number of in-situ tests to be developed and operated from the Underground Research Facility (URF). Integrated large-scale experiments have been developed during the last four years, within the framework of the Commission of the European Communities (CEC) research contracts, in order to gain more insight into the thermal influence of heat-emiting wastes on the clay behaviour in the near field.

This paper summarizes the knowledge gained from the in-situ hydro-thermo-mechanical experiments realised from the URF. The objectives and main issues of the tests are described. Information regarding selection of parameters and representativeness of their measurements is discussed. Despite their different aims and designs, three hydro-thermo-mechanical experiments are compared in order to emphasize similarities in the general behaviour of the clay massif submitted to a thermal load. It is observed that its behaviour is qualitatively similar to the reaction upon a constant total stress increase. With the information now available, it is not obvious to draw conclusions with respect to the irreversibility of some phenomena.

Simple in-house analytical codes are able to simulate with a good accuracy the hydro-thermo-mechanical behaviour of clay. Nevertheless, these codes are not sufficient to describe the complexity of the phenomena that are involved in hydro-thermo-mechanical processes as pointed out by field data. In order to validate more complex models, the possibilities to improve the representativeness of the measurements are investigated.