基于贡献权重迭加法的滑坡风险区划

贡献权重迭加法是对滑坡本底因子和承灾体因子在滑坡发育中的贡献率进行统计后,通过贡献率均值化、规一化处理,利用权重转换模型计算出每一个因子内部的权重——自权重W和因子相互之间的权重——互权重W＇。将滑坡因子、承灾体因子和两者的自权重、互权重分别相乘迭加,得到滑坡危险度和易损度区划结果,再将2项结果相乘得出滑坡风险区划。     

云南楚雄红层盆地六苴砂岩铜矿区断裂的地质特征及其与成矿的关系

云南六苴铜矿区分布有六苴、凹地苴等典型砂（页）岩型铜矿床。在矿区大比例尺填图的基础上,运用构造成矿动力学的理论和方法,筛选典型断裂进行断裂面力学性质的鉴定,划分构造期次,总结构造体系,对区内不同期次、不同方向断裂的地质特征及其与成矿的关系进行了系统的阐述。认为矿区断裂的发育经历了早期近东西向挤压、晚期北东-南西向挤压和后期近南北向挤压的过程。早期近东西向主应力作用时期是铜富集成矿的重要时期,形成的近南北向压性断裂为成矿提供了有利的场所和必要的条件;晚期北西向压扭性断裂、北东向扭张性断裂促使矿体进一步富集;后期近东西向压扭性断裂开始破坏矿体。将矿体向全浅色砂岩一侧错动。     

山西保德—静乐地区新近纪地层时代讨论

通过对山西保德-静乐地区新近纪地层的野外地质调查和实测剖面,对分布于该区的新近纪地层进行了详细的研究和划分,获得了新的ESR和古地磁测年数据,并结合生物地层序列确定了该区新近系地层的顺序为：新近系上新统静乐组（N2j）、新近系中新统上部保德组（N1^26）和中新统下部芦子沟组（N1^1l）。     

煤层气固井声幅测井方法探讨

影响煤层气固井声幅测井的因素较多,如地层软硬变化大、套管内径或壁厚不均、仪器不居中、发射能量不足、接收灵敏度不够等,这些因素的存在将会导致首波丢失、时差曲线产生周波跳跃或波动现象。为提高煤层气固井声幅测井质量,要尽量保证所用仪器外径接近套管内径,以减少无效传播和能量损失,另外需提高仪器的发射能量及接收灵敏度;在自由套管和声波强吸收地层,必须保证自由套管首波不限幅、声波强吸收地层首波不丢失。在现场解释时,一般以＂自由套管＂处的偏转幅度值A为标准,将固井声幅曲线幅度的20%A和40%A作为分界点,评价固井效果。     

稀土矿床：基本特点与全球分布规律

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。     

秦岭南缘勉略带构造属性及晚古生代地质背景:来自碎屑锆石U-Pb年代学的制约

勉略构造带作为秦岭造山带内重要的构造边界,关于其构造属性及晚古生代以来的地质背景,一直是学术界争论的焦点。碎屑锆石U-Pb年代学在限定地层单元的最大沉积年龄、研究区域构造岩浆事件及约束构造地质背景等方面行之有效。基于此,通过对勉略带内五郎坪北侧两河口变沉积地层和侵入其中的变形花岗岩脉体进行LA-ICP-MS锆石U-Pb年代学研究。获得2件变形花岗岩脉的结晶年龄均为406±1Ma。碎屑锆石主年龄谱分别为422～456Ma和558～826Ma,峰值年龄为441Ma和771Ma、813Ma,次级年龄谱分别为942～1495Ma和1658～2981Ma,峰值年龄不明显。依据最小一组碎屑锆石的峰值年龄(441Ma),和侵入其中的变形花岗岩脉(406±0.6Ma),限定该变沉积地层形成时代为406～441Ma(S_1-D_1)。碎屑锆石年龄谱显示该套变沉积地层物质来源较为复杂,其中秦岭造山带及扬子板块北缘早古生代、新元古代岩浆岩为其提供了74%±的物源,古老变质基底为其提供了26%±的物源。通过与区域上已有资料对比,认为勉略构造带内晚古生代沉积地层形成环境与邻区大致相同,且本次所获得的变沉积岩碎屑锆石年龄谱也与邻区泥盆系相似。综合认为,勉略构造带与邻区在晚古生代应属同一构造环境,晚古生代"勉略海盆"应当包括整个南秦岭。     

中山市绿色生态小区规划建设研究

在深入解析绿色生态小区实质内涵的基础上，综合评述了中山市绿色生态小区建设在概念理解、小区景观建设、住宅建设经济性及和谐统一等方面存在的主要问题，结合中山近年城市建设发展情况，从提高城市竞争力、提升城市品位和促进“两个适宜”城市发展目标的实现等方面具体分析了中山绿色生态小区建设的实践意义。最后从做好宣传、提高市民意识、推动实施政策等方面提出今后中山绿色生态小区发展之建议，以期促进中山城市的良性运作和健康发展。     

Equation of state of MgGeO3 perovskite to 65 GPa: comparison with the post-perovskite phase

The equation of state of MgGeO₃ perovskite was determined between 25 and 66 GPa using synchrotron X-ray diffraction with the laser-heated diamond anvil cell. The data were fit to a third-order Birch–Murnaghan equation of state and yielded a zero-pressure volume (V ₀) of 182.2 ± 0.3 Å³ and bulk modulus (K ₀) of 229 ± 3 GPa, with the pressure derivative (K′₀ = (?K ₀/?P) _T ) fixed at 3.7. Differential stresses were evaluated using lattice strain theory and found to be typically less than about 1.5 GPa. Theoretical calculations were also carried out using density functional theory from 0 to 205 GPa. The equation of state parameters from theory (V ₀ = 180.2 Å³, K ₀ = 221.3 GPa, and K′₀ = 3.90) are in agreement with experiment, although theoretically calculated volumes are systematically lower than experiment. The properties of the perovskite phase were compared to MgGeO₃ post-perovskite phase near the observed phase transition pressure (～65 GPa). Across the transition, the density increased by 2.0(0.7)%. This is in excellent agreement with the theoretically determined density change of 1.9%; however both values are larger than those for the (Mg,Fe)SiO₃ phase transition. The bulk sound velocity change across the transition is small and is likely to be negative [?0.5(1.6)% from experiment and ?1.2% from theory]. These results are similar to previous findings for the (Mg,Fe)SiO₃ system. A linearized Birch–Murnaghan equation of state fit to each axis yielded zero-pressure compressibilities of 0.0022, 0.0009, and 0.0016 GPa^?1 for the a, b, and c axis, respectively. Magnesium germanate appears to be a good analog system for studying the properties of the perovskite and post-perovskite phases in silicates.     

Influence of sedimentary environments on mechanical properties of clastic rocks

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.     

VSP资料约束地层反滤波研究

浅地表的低速带和地层滤波作用导致地震信号的能量衰减,地震子波的高频快速衰减,速度频散的子波变形,对地震底层分析带来了严重的影响。地层反滤波算法就是为了消除地层对子波的影响,利用VSP中的直达下行波推算出每个地层滤波算子,计算出各个地层滤波算子的反算子,然后利用这些反算子恢复出地表记录中损失掉的高频成分,减弱地层滤波对波形的影响,增加地表记录的频率成分和波形的准确度。分析实际地震资料表明,经过地层反滤波处理后的记录频率成分明显提升,地质构造更加准确、清晰。