利用GNSS干涉信号振荡幅度反演土壤湿度

根据干涉效应和GNSS接收机信噪比估计方法,推导了利用GNSS干涉信号幅度进行土壤湿度反演的模型,建模过程考虑了天线增益、土壤介电常数和噪声的影响。提出了使用AMPD算法从含有噪声的归一化干涉功率曲线中提取干涉峰值与谷值,进而反演了土壤介电常数与土壤湿度的方法,并对其进行了仿真。结果表明,利用提取出来的干涉谷值进行反演性能比峰值好,相对稳定准确的卫星仰角范围为5°~25°,湿度大于0.06cm~3/cm~3时反演结果更为准确,标准差在0.01cm~3/cm~3左右波动。     

基于混合罚函数法的多尺度电离层层析确权方法

在利用GNSS进行像素基电离层层析时,多尺度层析方法利用权重因子将反演区域不同像素层析模型结合在一起,最终得到电离层电子密度反演结果,可以有效地解决电离层层析过程中不适应问题和最终的电离层电子密度失真现象。在多尺度电离层层析中,不同像素尺度层析模型之间权重是影响最终的电离层电子密度精度的重要因素。为了获得高精度电离层层析模型,考虑到权重因子存在着等式和不等式限制条件,采用解决最优化问题的罚函数法确定不同像素尺度电离层层析模型之间的权重。通过采用实测GNSS观测数据进行电离层多尺度电离层层析,对比了多尺度层析模型的各个子模型建模精度并进行分析,同时将罚函数法获得的模型精度与其他确权方法进行了对比,该方法可以有效地应用于多尺电离层度层析,且最终的层析模型精度优于其他确权方法,更优于单尺度电离层层析模型精度。     

回归-Elman网络在矿坝变形预测中的应用

金矿开展矿坝的变形监测工作,引入多层递阶回归分析模型,有较高的预测精度,但方法较繁琐,计算较复杂。由于变形数据可分离成趋势项与随机项,趋势项可用多元线性回归良好地拟合;随机项的预测,文中采用Elman网络建模计算,最后利用矿坝的实测高程位移数据进行验证,并与多层递阶回归进行比较。结果表明:回归-Elman网络模型比多层递阶回归的预测精度更高,效果更好,且方法简洁实用性强。     

基于 DTW 距离的时序 NDVI 数据植被信息提取--以秦巴山区为例

秦巴山区是我国重要的生态屏障,对该区的植被信息提取开展研究,可为区内生态服务功能及自然资源开发利用提供基础数据。通过加窗处理改进DTW距离相似性算法,结合临近度模糊分类方法对2005—2014年的MODIS NDVI时序数据进行植被信息提取。首先利用S-G滤波对MODIS NDVI时序数据进行重建;再利用2013年的采样数据构建各类植被的标准NDVI时序曲线,逐像元计算与标准NDVI时序曲线的加窗DTW距离,利用临近度模糊分类实现植被信息提取;最后验证提取精度。结果表明,算法具有较高的运行效率,可避免错误匹配,以较高的精度(总体精度83.8%,kappa系数0.77)实现长时间序列的植被信息提取。     

国家环境遥感监测体系研究与实现

随着国家空间基础设施的建设和发展,中国遥感监测体系研究与建设取得了重大突破,从无到有形成了国家环境遥感监测能力,并业务化实现了主要环境遥感监测要素产品的生产与服务,为新时期环境管理工作提供了有力支撑。在分析国内外环境遥感发展及中国环境遥感监测需求的基础上,阐述了中国环境监测体系建设的必要性,研究了国家环境遥感监测体系的建立与业务化运行,提出了中国环境遥感监测体系发展思路与下一步重点任务。     

地理国情普查外业调绘核查系统实现

针对传统的基于纸质地图的外业调绘核查工作具有操作复杂、采集数据不精确、作业流程不规范等缺点,该文设计开发了基于iPad的地理国情普查外业调绘核查系统。在内业高精度遥感影像判读的基础上,采用全数字化的外业调绘核查技术,进行地理国情要素移动式、网络化外业调查和验证,快速采集和编辑调查数据,为外业工作提供了一套完整的解决方案。该系统在青岛市崂山区和城阳区的试点中已经得到广泛的应用,较好地验证了移动GIS技术用于外业信息采集的可行性。     

ARMA模型在变形监测中的应用

介绍了时间序列分析模型ARMA进行模型识别、参数估计、模型检验和模型预测及其在变形监测数据处理中的应用。并结合某一工程实例,采用该模型对一组实测变形数据进行了分析、预测,取得了较好的数据拟合与预测效果,该模型对变形监测数据处理与预报是十分可靠和可行的,具有很强的实际应用价值。     

基于点云空洞修复和TPS模型的数学形态学机载LIDAR滤波

在分析现有滤波算法的基础上,结合数据驱动和模型驱动式算子各自的优点,提出基于点云空洞修复和TPS变形模型的数学形态学机载LIDAR点云滤波,该方法首先提取和修复由水域造成的大面积点云空洞,采用多尺度形态学开算子作用于修复的数据,得到近似裸露地表面;然后利用2D空间的TPS变形模型,以近似地表面为基础,插值原始点云,根据插值与原始点云高程的差值大小去识别地面点和非地面点。通过定量分析,验证该方法不仅有较高的滤波精度,而且也能较好的保留裸露地表的细节特征,同时该方法有助于辅助人工处理,提高数据处理的质量。     

A closed-loop EKF and multi-failure diagnosis approach for cooperative GNSS positioning

Current cooperative positioning with global navigation satellite system (GNSS) for connected vehicle application mainly uses pseudorange measurements. However, the positioning accuracy offered cannot meet the requirements for lane-level positioning, collision avoidance and future automatic driving, which needs real-time positioning accuracy of better than 0.5 m. Furthermore, there is an apparent lack of research into the integrity issue for these new applications under emerging driverless vehicle applications. In order to overcome those problems, a new extended Kalman filter (EKF) and a multi-failure diagnosis algorithm are developed to process both GNSS pseudorange and carrier phase measurements. We first introduce a new closed-loop EKF with partial ambiguity resolution as feedback to address the low accuracy issue. Then a multi-failure diagnosis algorithm is proposed to improve integrity and reliability. The core of this new algorithm includes using Carrier phase-based Receiver Autonomous Integrity Monitoring method for failure detection, and the double extended w test detectors to identify failure. A cooperative positioning experiment was carried out to validate the proposed method. The results show that the proposed closed-loop EKF can provide highly accurate positioning, and the multi-failure diagnosis method is effective in detecting and identifying failures for both code and carrier phase measurements.     

Weak GPS signal tracking using FFT discriminator in open loop receiver

An open loop tracking architecture, which tracks GPS signals under weak and challenging conditions, is analyzed. The in-phase and quadrature-phase integration pair is regarded as a single tone complex signal. An FFT-based method is used as a frequency discriminator to estimate the Doppler frequency residual of the single tone signal. Another FFT-based method applies complex squaring to eliminate the effect of the navigation data bits polarities. The performance of the FFT-based discriminators is assessed in three criteria. Those criteria are the signal strength and dynamic range that can be tracked and the accuracy of the estimated Doppler frequency. In addition, the performance of the discriminators is analyzed to provide the theoretical and simulated peak detection probability. The results indicate that the FFT discriminator can track signals about 5 dB weaker than the signals that can be tracked by the complex squared FFT discriminator. In a quasi-static environment, the Doppler frequency residual can be assumed to be around zero, which can enable the FFT-based discriminators to track signals with approximately 2 dB less power. Moreover, the performance of the FFT-based discriminators is compared with the performance of two other frequency discriminators, namely the fast–slow and power-based. The comparison results indicate that these two frequency discriminators give higher frequency estimation accuracy, but they have a narrower dynamic range.