A glancing incidence solar telescope for the soft x-ray region

This paper describes the instrumentation of an Aerobee rocket (NASA 4.95 GS) which was launched from White Sands Missile Range on May 20th 1966, to observe the Sun in the soft X-ray region. The experiment package, which was pointed at the sun by a control system stabilized about all three axes, carried two Wolter type I glancing incidence telescopes to photograph the sun in wavelength regions (determined by bandpass filters) between 3 and 75 Å, and two proportional counters to obtain flux data and rough spectral shapes in the regions 2–11 Å and 8–20 Å. The spatial resolution obtained was about 20 arc seconds. Limb brightening and polar darkening are very pronounced at the longer wavelengths. A tuft of emission was observed at the North Pole in addition to an arch-like structure on the NW limb. Several of the photographs are presented, and some preliminary results are discussed.     

Powder- and single crystal Mössbauer spectroscopy on synthetic fayalite

Mössbauer measurements on synthetic iron orthosilicate Fe₂SiO₄ (fayalite) were carried out in the antiferromagnetic spin state below T _N 65 K. The Mössbauer parameters isomer shift , inner magnetic field H(0), angle between H(0) and the z-component of the electric field gradient (efg), quadrupole splitting QS and asymmetry parameter were determined as a function of temperature. These parameters could be attributed to the two crystallographic sites M1 and M2.The smaller isomer shift on M1 with respect to M2 displays the more covalent character of the Fe-O bond on M1, which is supported by previous neutron diffraction experiments. H(0) shows a Brillouin-type behaviour with different fields on the two crystallographic sites (stronger on M1) and a small discontinuity at T = 23 K which corresponds with previous magnetic measurements. The quadrupole splitting is equal on both sites within error bars, in agreement with previous theoretical results and in contradiction to previous Mössbauer refinements published elsewhere.     

Multi-decadal synthesis of benthic–pelagic coupling in the western arctic: Role of cross-shelf advective processes

Using geographic information systems (GIS) software and geostatistical techniques, we utilized three decades of water-column chlorophyll a data to examine the relative importance of autochthonous versus allochthonous sources of reduced carbon to benthic communities that occur from the northern Bering to the eastern Beaufort Sea shelf. Spatial trend analyses revealed areas of high benthic biomass (>300 g m⁻²) and chlorophyll (>150 mg m⁻²) on both the southern and northern Chukchi shelf; both areas are known as depositional centers for reduced organic matter that originates on the Bering Sea shelf and is advected northward in Anadyr and Bering shelf water masses. We found a significant correlation between biomass and chlorophyll a in the Chukchi Sea, reflective of the strong benthic–pelagic coupling in a system that is utilized heavily by benthic-feeding marine mammals. In contrast, there was no significant correlation between biomass and chlorophyll in the Beaufort Sea, which by comparison, is considerably less productive (biomass and chlorophyll, <75 g m⁻² and <50 mg m⁻², respectively). One notable exception is an area of relatively high biomass (50–100 g m⁻²) and chlorophyll (80 mg m⁻²) near Barter Island in the eastern Beaufort Sea. Compared to other adjacent areas in the Beaufort Sea, the chlorophyll values in the vicinity of Barter Island were considerably higher and likely reflect a long-hypothesized upwelling in that area and close coupling between the benthos and autochthonous production. In the Bering Sea, a drop in benthic biomass in 1994 compared with previous measurements (1974–1993) may support earlier observations that document a decline in biomass that began between the 1980s and 1990s in the Chirikov Basin and south of St. Lawrence Island. The results of this study indicate that the benthos is an excellent long-term indicator of both local and physical advective processes. In addition, this work provides further evidence that secondary production on arctic shelves can be significantly augmented by reduced carbon advected from highly productive adjacent shelves.     

Dissolved oxygen variations in alpine glacial meltwaters

Recent models of chemical weathering in alpine glacial meltwaters suggest that sulphide oxidation is a major source of solute in the distributed component of the subglacial hydrological system. This reaction requires O₂, and may lower dissolved oxygen levels to below saturation with respect to the atmosphere. This should result in an inverse association between SO₇^2- and dissolved oxygen saturation. However, measurements of O₂ saturation in bulk meltwaters draining the Haut Glacier d'Arolla, Switzerland, show that there is a positive association between SO₄^2- and O₂ saturation. The O₂ content of glacial meltwaters depends on the initial content of snow and icemelt, which may be controlled by the rate of melting, and the kinetic balance between O₂ losses (e.g. sulphide oxidation, microbial respiration) and gains (e.g. diffusion of O₂ into solution).     

Temperature dependence of the cation distribution in nickel aluminate (NiAl2O4) spinel: a powder XRD study

NiAl₂O₄ is a largely inverse spinel, which in detail shows increasing randomisation with temperature of Ni and Al between the octahedral and tetrahedral cation sites of the spinel structure. We have used powder XRD to determine this cation distribution in various samples of NiAl₂O₄ quenched after annealing between 700 and 1400° C. The inversion parameter (x) can be measured with a precision of ± 0.004 (one standard deviation), and a comparison of different methods of synthesis, X-ray diffraction and refinement techniques, suggests a probable accuracy of better than 0.01. The results are supported by some preliminary single crystal refinements on flux-grown samples.Below 800° C the rate of cation ordering becomes very slow, and, despite reaching an apparently steady state, it is doubtful if our samples attained complete internal equilibrium. Above 1250° C the cation redistribution becomes so fast that the quenching method becomes unreliable. Between 800 and 1250° C inclusive, the degree of inversion changes smoothly from 0.87 at 800° C to 0.79 at 1250° C, and is accompanied by linear changes in u, the oxygen parameter, from 0.2555 to 0.2563 (±0.0002), and a₀, the lattice parameter, from 8.0462 to 8.0522 Å (±0.0002 Å).     

Mineralogical, chemical, and crystallographic properties of supergene jarosite-group minerals from the Xitieshan Pb-Zn sulfide deposit, northern Tibetan Plateau, China

Supergene jarosite-group minerals are widespread in weathering profiles overlying Pb-Zn sulfide ores at Xitieshan, northern Tibetan Plateau, China. They consist predominantly of K-deficient natrojarosite, with lesser amounts of K-rich natrojarosite and plumbojarosite. Electron microprobe (EMP) analyses, scanning electron microcopy (SEM) investigation, and X-ray mapping reveal that the jarosite-group minerals are characterized by spectacular oscillatory zoning composed of alternating growth bands of K-deficient and K-bearing natrojarosite (K₂O >1 wt.%). Plumbojarosite, whenever present, occurs as an overgrowth in the outermost bands, and its composition can be best represented by K_0.29Na_0.19Pb_0.31Fe_2.66Al_0.22(SO₄)_1.65(PO₄)_0.31(AsO₄)_0.04(OH)_7.37. The substitution of monovalent for divalent cations at the A site of plumbojarosite is charge balanced by the substitution of five-valent for six-valent anions in XO₄ at the X site. Thermogravimetric analysis (TGA) of representative samples reveal mass losses of 11.46 wt.% at 446.6 °C and 21.42 wt.% at 683.4 °C due to dehydroxylation and desulfidation, respectively. TGA data also indicate that the natrojarosite structure collapses at 446.6 °C, resulting in the formation of NaFe(SO₄)₂ and minor hematite. The decomposition products of NaFe(SO₄)₂ are hematite and Na₂SO₄. Powder X-ray diffraction (XRD) analyses show that the jarosite-group minerals have mean unit-cell parameters of a?=?7.315 Å and c?=?016.598 Å. XRD and EMP data support the view that substitutions of Na for K in the A site and full Fe occupancy in the B site can considerably decrease the unit-cell parameter c, but only slightly increase a. The results from this study suggest that the observed oscillatory zoning of jarosite-group minerals at Xitieshan resulted mainly from substitutions of K for Na at the A site and P for S at the X site.     

Corundum- and kyanite-bearing anatexites from the Precambrian of tanzania

In the Precambrian near Morogoro (East Tanzania) there are anatectic gneisses which are composed of two different domains: (1) Medium grained gneiss with the assemblage (+ rutile + baddeleyite): albite (ab₉₅an₀₃or₀₂) + muscovite + phlogopite_ss + corundum, and albite (ab₈₈an₀₉or₀₃ + kyanite or sillimanite + phlogopite_ss. (2) Coarse grained nests of corundum and antiperthite with minor albite, muscovite, phlogopite, rutile, baddeleyite, and tourmaline. The bulk composition of the antiperthite id ab₇₅an₀₂or₂₃, the composition of the Na-phase ab₉₅an₀₃or₀₂, that of the K-phase ab₁₃an₀₀or₈₇. Phase relationship of the rock can be modelled in the Na-rich, Si-undersaturated part of the KNASH system. P-T conditions are close to the intersection of the melting curve muscovite_ss + H₂O = corundum + liquid with the kyanite-sillimanite transition, i.e. 7.7 kb/695°C assuming a_H2O = 1.     

Improving the efficiency of ant algorithms using adaptive refinement: Application to storm water network design

The ant algorithm is a new evolutionary optimization method proposed for the solution of discrete combinatorial optimization problems. Many engineering optimization problems involve decision variables of continuous nature. Application of the ant algorithm to the optimization of these continuous problems requires discretization of the continuous search space, thereby reducing the underlying continuous problem to a discrete optimization problem. The level of discretization of the continuous search space, however, could present some problems. Generally, coarse discretization of the continuous design variables could adversely affect the quality of the final solution while finer discretization would enlarge the scale of the problem leading to higher computation cost and, occasionally, to low quality solutions. An adaptive refinement procedure is introduced in this paper as a remedy for the problem just outlined. The method is based on the idea of limiting the originally wide search space to a smaller one once a locally converged solution is obtained. The smaller search space is designed to contain the locally optimum solution at its center. The resulting search space is discretized and a completely new search is conducted to find a better solution. The procedure is continued until no improvement can be made by further refinement. The method is applied to a benchmark problem in storm water network design discipline and the results are compared with those of existing methods. The method is shown to be very effective and efficient regarding the optimality of the solution, and the convergence characteristics of the resulting ant algorithm. Furthermore, the method proves itself capable of finding an optimal, or near-optimal solution, independent of the discretization level and the size of the colony used.