Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Large-scale three-dimensional inversion of EarthScope MT data using the integral equation method

In this paper we apply 3D inversion to MT data collected in the Northwestern United States as a part of the EarthScope project. By the end of 2009 MT data had been collected from 262 stations located throughout Oregon, Washington, Idaho, and most of Montana and Wyoming. We used data from 139 MT stations in this analysis. We developed fully parallelized rigorous 3D MT inversion software based on the integral equation method with variable background conductivity. We also implemented a receiver footprint approach which considerably reduced the computational resources needed to invert the large volumes of data covering vast areas. The data set used in the inversion was obtained through the Incorporated Research Institutions for Seismology (IRIS). The inversion domain was divided into 2.7 M cells. The inverted electrical conductivity distribution agrees reasonably well with geological features of the region.     

Velocity constraints for the inner core inferred from long-period PKP amplitudes

Long-period PKP amplitudes from 16 earthquakes in the distance range 110– 170° are compared with theoretical amplitudes which are derived from synthetic seismograms calculated for 56 systematic modifications of Earth model 1066B in the inner core. A suitable normalization procedure allows for the common representation of all observed amplitudes as a function of epicentral distance. Using the theoretical amplitude distributions it can be shown that the parameters of a regression line through the logarithmic and normalized amplitudes between 110 and 134° are related to the velocity and density jump at the inner-core boundary (ICB). The analysis shows that the dominant influence on the PKP amplitudes is the P-velocity jump which can be restricted to 0.64 ± 0.05 km s^?1. There exists a trade-off between the S-velocity jump and the density jump. Restricting the latter to the reasonable range 0–1.2 g cm^?3 the S-velocity jump at the ICB can be inferred to be 2.5–3.0 km s^?1. A rather strong S-velocity gradient below the ICB follows from the condition that the S-wave travel-time through the inner core agrees with that implied by free oscillation observations. This leads to central S-velocities between 3.81 and 4.15 km s^?1, assuming a parabolic velocity law.     

Computing the Sensitivity Kernels for 2.5-D Seismic Waveform Inversion in Heterogeneous,Anisotropic Media

2.5-D modeling and inversion techniques are much closer to reality than the simple and traditional 2-D seismic wave modeling and inversion. The sensitivity kernels required in full waveform seismic tomographic inversion are the Fréchet derivatives of the displacement vector with respect to the independent anisotropic model parameters of the subsurface. They give the sensitivity of the seismograms to changes in the model parameters. This paper applies two methods, called ‘the perturbation method’ and ‘the matrix method’, to derive the sensitivity kernels for 2.5-D seismic waveform inversion. We show that the two methods yield the same explicit expressions for the Fréchet derivatives using a constant-block model parameterization, and are available for both the line-source (2-D) and the point-source (2.5-D) cases. The method involves two Green’s function vectors and their gradients, as well as the derivatives of the elastic modulus tensor with respect to the independent model parameters. The two Green’s function vectors are the responses of the displacement vector to the two directed unit vectors located at the source and geophone positions, respectively; they can be generally obtained by numerical methods. The gradients of the Green’s function vectors may be approximated in the same manner as the differential computations in the forward modeling. The derivatives of the elastic modulus tensor with respect to the independent model parameters can be obtained analytically, dependent on the class of medium anisotropy. Explicit expressions are given for two special cases—isotropic and tilted transversely isotropic (TTI) media. Numerical examples are given for the latter case, which involves five independent elastic moduli (or Thomsen parameters) plus one angle defining the symmetry axis.     

Estimation of contaminant transport parameters for a tropical sand in a sand tank model

This research describes the goals, design and implementation of a quasi natural gradient, laboratory scale, sand tank (aquifer) model experiment. The model was used to study the transport of an inorganic tracer (Chloride) in groundwater, within a tropical aquifer (porous medium) material. Three-dimensional sand tank (1.8 m × 0.3 m × 0.8 m) experiments were conducted to investigate contaminant transport and natural attenuation within the sand tank. In all, 360 samples were collected during 24 sampling sessions, for the three days of the tracer experiments in the Sand Tank. The Owena sand is a poorly graded sand with 88.1 % sand and 11.9 % gravel. Geotechnical properties including; coefficient of uniformity C_u = 2.53, coefficient of gradation C_z = 0.181, hydraulic conductivity K = 5.76 × 10^?4 m/s, bulk density p = 1.9 Mg/m³, effective porosity n_e = 0.215 and median grain diameter D₅₀ = 0.55 mm, were determined. Other relevant hydraulic and solute transport parameters, such as dispersion coefficients and dispersivities were also established for the tropical soil.     

Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.     

Wavelet Analysis of Solar Diameter Measurements Performed at Calern Observatory Astrolabe

Since 1975, a visual program of solar diameter measurement is pursuedat Calern Observatory (France). These observations allowed to put inevidence variations in solar data. Several studies were developed inorder to analyze the data using appropriate me thods (deconvolution ofthe observation window function and least square fits) (Moussaouiet al., 1999). We present in this work a time-frequency studyof the found harmonic terms. It is developed using the wavelettransform. The obtained results are presented and discussed.     

Microseismicity within a karstified rock mass due to cracks and collapses as a tool for risk management

Seismometer arrays have been widely applied to record collapse by controlled explosion in mines and caves. However, most underground failures are natural events, and because they can occur abruptly, underground failures represent a serious geological hazard. An accelerometric array installed on 4 September 2008 has been used to manage the geological risk of the Peschiera Springs drainage plant of Rome??s aqueduct, which is located in the Central Apennines approximately 80?km from Rome, Italy. The plant occupies a karstified carbonatic slope that is extensively involved in gravitational deformations, which are responsible for underground failures such as cracks and collapses. To distinguish among different types of recorded events, an automated procedure was implemented based on the duration, peak of ground acceleration (PGA) and PGA variation in the recordings of the plant??s accelerometric stations. The frequencies of earthquakes and micro-earthquakes due to underground failures are, in general, well correlated. Nevertheless, many underground failure sequences can be directly associated with the continuous deformations that affect the slope. The cumulative Arias intensity trend derived for the underground failures combined with the failure and earthquake frequencies enabled the definition of a control index (CI) that identifies alarming or emergency conditions. The CI can be used as a tool for managing the geological risk associated with the deformational processes that affect the drainage plant.     

Late Quaternary paleoclimate of western Alaska inferred from fossil chironomids and its relation to vegetation histories

Fossil Chironomidae assemblages (with a few Chaoboridae and Ceratopogonidae) from Zagoskin and Burial Lakes in western Alaska provide quantitative reconstructions of mean July air temperatures for periods of the late-middle Wisconsin (～39,000–34,000 cal yr B.P.) to the present. Inferred temperatures are compared with previously analyzed pollen data from each site summarized here by indirect ordination. Paleotemperature trends reveal substantial differences in the timing of climatic warming following the late Wisconsin at each site, although chronological uncertainty exists. Zagoskin Lake shows early warming beginning at about 21,000 cal yr B.P., whereas warming at Burial Lake begins ～4000 years later. Summer climates during the last glacial maximum (LGM) were on average ～3.5 °C below the modern temperatures at each site. Major shifts in vegetation occurred from ～19,000 to 10,000 cal yr B.P. at Zagoskin Lake and from ～17,000 to 10,000 cal yr B.P. at Burial Lake. Vegetation shifts followed climatic warming, when temperatures neared modern values. Both sites provide evidence of an early postglacial thermal maximum at ～12,300 cal yr B.P. These chironomid records, combined with other insect-based climatic reconstructions from Beringia, indicate that during the LGM: (1) greater continentality likely influenced regions adjacent to the Bering Land Bridge and (2) summer climates were, at times, not dominated by severe cold.