A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Sediment-starved sand ridges on a mixed carbonate/siliciclastic inner shelf off west-central Florida

High-resolution side-scan mosaics, sediment analyses, and physical process data have revealed that the mixed carbonate/siliciclastic, inner shelf of west-central Florida supports a highly complex field of active sand ridges mantled by a hierarchy of bedforms. The sand ridges, mostly oriented obliquely to the shoreline trend, extend from 2 km to over 25 km offshore. They show many similarities to their well-known counterparts situated along the US Atlantic margin in that both increase in relief with increasing water depth, both are oriented obliquely to the coast, and both respond to modern shelf dynamics. There are significant differences in that the sand ridges on the west-central Florida shelf are smaller in all dimensions, have a relatively high carbonate content, and are separated by exposed rock surfaces. They are also shoreface-detached and are sediment-starved, thus stunting their development. Morphological details are highly distinctive and apparent in side-scan imagery due to the high acoustic contrast. The seafloor is active and not a relict system as indicated by: (1) relatively young AMS ¹⁴C dates (<1600 yr BP) from forams in the shallow subsurface (1.6 meters below seafloor), (2) apparent shifts in sharply distinctive grayscale boundaries seen in time-series side-scan mosaics, (3) maintenance of these sharp acoustic boundaries and development of small bedforms in an area of constant and extensive bioturbation, (4) sediment textural asymmetry indicative of selective transport across bedform topography, (5) morphological asymmetry of sand ridges and 2D dunes, and (6) current-meter data indicating that the critical threshold velocity for sediment transport is frequently exceeded. Although larger sand ridges are found along other portions of the west-central Florida inner shelf, these smaller sand ridges are best developed seaward of a major coastal headland, suggesting some genetic relationship. The headland may focus and accelerate the N–S reversing currents. An elevated rock terrace extending from the headland supports these ridges in a shallower water environment than the surrounding shelf, allowing them to be more easily influenced by currents and surface gravity waves. Tidal currents, storm-generated flows, and seasonally developed flows are shore-parallel and oriented obliquely to the NW–SE trending ridges, indicating that they have developed as described by the Huthnance model. Although inner shelf sand ridges have been extensively examined elsewhere, this study is the first to describe them in a low-energy, sediment-starved, dominantly mixed siliciclastic/carbonate sedimentary environment situated on a former limestone platform.     

Effect of free surface and strut on fins attached to a strut

An extensive experimental and computational investigation of the combined and separate effects of free surface and body on the lift characteristics of a pair of fins attached to a strut and fin alone is conducted. The results reveal that the free-surface effect becomes significant when the depth of submergence to chord ratio (H/c) is less than three. The effect of the strut is also realized for shallower depth of submergence of the fins through free-surface deformation leading to a significant change in the incidence angle of the flow to the fins. The numerical results based on the Higher Order Boundary Element Method with the linearized free-surface condition show good agreement with the experimental results for fin (foil) alone even at shallow submergence, but some discrepancies appear for the fin attached to the strut at higher speeds mostly due to the neglect of the nonlinear free-surface effect.     

The influence of salinity on the solubility of Zn and Cd sulphides in the Scheldt estuary

In the estuary of the river Scheldt, where an oxygen gradient exists in addition to the salinity gradient, redox processes will be of major importance for trace metal mobilisation. In this study, the influence of salinity and pH on the redox processes of dissolved Zn and Cd sulphides is investigated together with the effects on the ratio of the dissolved Zn and Cd concentrations. The speciation of these metals is calculated with the chemical equilibrium programme +. Zn sulphides are oxidised at lower oxygen concentrations than Cd sulphides, due to lower stability constants, causing a sudden increase or peak in the dissolved Zn/Cd ratio. The formation of dissolved Cd chloride complexes when oxidation occurs at high salinities (S=15) increases the mobility of Cd, causing a decrease in the Zn/Cd peak of the total dissolved concentrations. The peak is three to four times smaller at S=15 than when oxidation occurs at S=2. The simple model calculations compare very well with field data. The Scheldt estuary is suitable to illustrate these calculations. In the 1970s, the anoxic part of the estuary reached S=15–20, but since the early 1980s it has dropped to S=2–10. Historic data on metals in the estuary from 1978, 1987 and the 1990s were used to compare with the equilibrium calculations. The increase of the dissolved Zn/Cd peak at low salinity as a consequence, of the decreasing anoxic region is confirmed well by the data. The good agreement between model calculations and field data is a proof of the extreme importance of redox processes for the solubility of Zn and Cd sulphides in the estuary.     

Spectra of the Black-Sea tsunamis

We perform the analysis of the time spectra of four tsunamis generated in the Black Sea by the earthquakes of 26.07.1927, 11.09.1927, 26.12.1939, and 12.07.1966. For the analysis of the spectra, we used digitized marigrams obtained for 12 points of the Black-Sea coast. The obtained spectra are, as a rule, multimode and have 1–4 spectral maxima. One maximum corresponds to the periods typical of tsunami waves and the other maxima correspond to the oscillations of the sea level with lower frequencies. It seems likely that the events of tsunami are accompanied by low-frequency oscillations of the level caused by the atmospheric forcing, seiches, or other factors. In numerous cases, the oscillations from the predominant energy range lie outside the characteristic range of periods of the tsunami waves. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 5, pp. 21–30, September–October, 2007.     

Sublethal effects of oiled sediment on the sand worm, Nereis (neanthes) virens: Induced changes in burrowing and emergence

The burrowing and emergence behavior of sand worms, Nereis (Neanthes) virens Sars, in sediment contaminated with sublethal concentrations of Prudhoe Bay crude oil ranging from 74 to 5222 ppm, was studied in the laboratory. Initial burrowing in oiled sediment did not differ from that observed in unoiled sediment. Emergence of exposed worms was related to the oil concentration and the extent of weathering of oiled sediment. Sand worms buried in unoiled sediment did not emerge. Worms dug from oiled sediment after 12 hours' exposure and placed on unoiled sediment were impaired, resulting in a significant increase in time to burrow. However, after 12h, they recovered and burrowed at normal rates. Worms held in oiled sediment for 96 h also recovered. Possible causes for recovery are discussed. Results suggest that oil-induced aberrations may increase vulnerability to predation.     

The distribution of total and electrochemically available copper in the northwestern atlantic ocean

Copper in a series of samples from the northwestern Atlantic has been determined by anodic stripping voltammetry (ASV) and atomic absorption spectrometry after preconcentration by cobalt—APDC coprecipitation. Samples from a transect across the continental shelf directly off the New York Bight showed a linear relationship between total copper and salinity (31–34‰) and less than 5% of the total copper was detectable by ASV. A slope water station showed less than 9% of the total copper to be ASV detectable in the upper 780m, below which the ASV detectable copper increased to 70% at 3000 m. The Sargasso Sea profiles showed less than 7% ASV detectable copper in the upper 150 m; the fraction of the total copper detected by ASV increased to about 80% of the total copper at greater depths. The reduced availability of copper to the ASV measurement in coastal waters and open ocean surface waters appears to be related to recent contact with waters where biological productivity occurs.