Secular resonances: New results

We integrated numerically, in the frame of the four body problem Sun-Jupiter-Saturn-asteroid the orbit of the asteroid 1974 MA, an Earth-crosser, which is located in a region where three resonances overlap: the two secular resonances ₅ and ₁₆ and the mean motion resonance 5/1. The numerical integration yields a qualitative orbital evolution of this particular region.     

Flow directions in ash-flow tuffs: a comparison of geological and magnetic susceptibility measurements, Tshirege member (upper Bandelier Tuff), Valles caldera, New Mexico, USA

This study concludes that the elongation axis (K ₁) of the ellipsoid of anisotropic magnetic susceptibility (AMS) is a suitable proxy for flow axis in ashflow tuffs. 153 oriented samples (176 specimens) were studied from 18 sites in the 1.1 Ma Tshirege member of the Bandelier Tuff. These sites are distributed around the Valles caldera at distances of 5–25 km outside of the rim.K ₁ axes correlate well with postulated radial flow axes at 13 sites.K ₁ also agrees with measured geological flow indicators, mainly imbricated larger clasts, at 7 sites. At 2 of the 5 sites where significant disagreement is seen between theoretical radial flow directions and measuredK ₁ axes, theK ₁ axes correspond well with geological flow indicators, indicating that the divergence of flow from the predicted radial flow pattern is real. Two major topographic buttresses are suggested as the cause of flow divergence for the Tshirege ash flows: the San Pedro buttress northwest of the caldera, and the San Miguel buttress in the southeast. In situK ₁ axes plunge about 7° toward the source at two-thirds of the sites; therefore the plunge ofK ₁ is a plausible in situ indicator for thedirection of flow. Multiple flow zones in sections of several meters thickness indicate changes of flow direction that are both rapid and large during ash-flow emplacement. These observations raisre the question of how best to represent mean flow directions in ash-flow sheets: by eigenvector methods, by vector-sum methods, or by modes. A method for measuring imbrication of larger clasts using apparent dips in vertical joints is outlined. Imbrication, determined in this way at one-third of the sites, dips toward the source, i.e., up-flow. The minimum (K ₃) axis of the AMS ellipsoid correlates with the flow foliation rather than with the larger clast imbrication. The flow axes of ash flows correspond with theK ₁ axes, not with the declination ofK ₃ axes as suggested by some authors. Initial dip of the sampled ash flows is not large and does not affect the paleomagnetic remanence direction, which is reversed with a mean ofD=173.5°,I=-38.4°, ₉₅=3.4°N=18. This mean is not different at the 95% confidence level from that of earlier workers. The mean pole, at 098.0°E, 74.8°N,A ₉₅=3.3°,N=18, is about 15° far-sided relative to the expected time-averaged geomagnetic pole, suggesting a history of emplacement too short to adequately average secular variation.     

The solubility of iron sulphides in synthetic and natural waters at ambient temperature

A critical evaluation of literature values for the solubility products, K _sp ^NBS = [Fe²⁺][HS^–] Fe²⁺ HS^– (H _NBS ⁺ )^–1, of various iron sulphide phases results in consensus values for the pKs of 2.95 ± 0.1 for amorphous ferrous sulphide, 3.6 ± 0.2 for mackinawite, 4.4 ± 0.1 for greigite, 5.1 ± 0.1 for pyrrhotite, 5.25 ± 0.2 for troilite and 16.4 ± 1.2 for pyrite.Where the analogous ion activity products have been measured in anoxic freshwaters in which there is evidence for the presence of solid phase FeS, the values lie within the range of 2.6–3.22, indicating that amorphous iron sulphide is the controlling phase. The single value for a groundwater of 2.65 (2.98 considering carbonate complexation) agrees. In seawater four values range between 3.85 to 4.2, indicating that mackinawite or greigite may be the controlling phase. The single low value of 2.94 is in a situation where particularly high fluxes of Fe (II) and S (–II) may result in the preferential precipitation of amorphous iron sulphide. Formation of framboidal pyrite in these sulphidic environments may occur in micro-niches and does not appear to influence bulk concentrations. Calculations show that the formation of Fe₂S₂ species probably accounts for very little of the iron or sulphide in most natural waters. Previously reported stability constants for the formation of Fe (HS)₂ and (Fe (HS)₃)^– are shown to be suspect, and these species are also thought to be negligible in natural waters. In completely anoxic pore waters polysulphides also have a negligible effect on speciation, but in tidal sediments they may reach appreciable concentrations and lead to the direct formation of pyrite. Concentrations of iron and sulphide in pore waters can be controlled by the more soluble iron sulphide phase. The change in the IAP with depth within the sediment may reflect ageing of the solid phase or a greater flux of Fe (II) and S (–II) nearer the sediment surface. This possible kinetic influence on the value of IAPs has implications for their use in geochemical studies involving phase formation.     

Ion microprobe analysis of oxygen isotope ratios in granulite facies magnetites: diffusive exchange as a guide to cooling history

Ion microprobe analysis of magnetites from the Adirondack Mountains, NY, yields oxygen isotope ratios with spatial resolution of 2–8 m and precision in the range of 1 (1 sigma). These analyses represent 11 orders of magnitude reduction in sample size compared to conventional analyses on this material and they are the first report of routinely reproducible precision in the 1 per mil range for analysis of ¹⁸O at this scale. High precision micro-analyses of this sort will permit wide-ranging new applications in stable isotope geochemistry. The analyzed magnetites form nearly spherical grains in a calcite matrix with diopside and monticellite. Textures are characteristic of granulite facies marbles and show no evidence for retrograde recrystallization of magnetite. Magnetites are near to Fe₃O₄ in composition, and optically and chemically homogeneous. A combination of ion probe plus conventional BrF₅ analysis shows that individual grains are homogeneous with ¹⁸O=8.9±1 SMOW from the core to near the rim of 0.1–1.2 mm diameter grains. Depth profiling into crystal growth faces of magnetites shows that rims are 9 depleted in ¹⁸O. These low ¹⁸O values increase in smooth gradients across the outer 10 m of magnetite rims in contact with calcite. These are the sharpest intracrystalline gradients measured to date in geological materials. This discovery is confirmed by bulk analysis of 150–350 m diameter magnetites which average 1.2 lower in ¹⁸O than coarse magnetites due to low ¹⁸O rims. Conventional analysis of coexisting calcite yields °¹⁸O=18.19, suggesting that bulk ¹⁸O (Cc-Mt)=9.3 and yielding an apparent equilibration temperature of 525° C, over 200° C below the temperature of regional metamorphism. Consideration of experimental diffusion data and grain size distribution for magnetite and calcite suggests two contrasting cooling histories. The data for oxygen in calcite under hydrothermal conditions at high P(H₂O) indicates that diffusion is faster in magnetite and modelling of the low ¹⁸O rims on magnetite would suggest that the Adirondacks experienced slow cooling after Grenville metamorphism, followed by a brief period of rapid cooling, possibly related to uplift. Conversely, the data for calcite at low P(H₂O) show slower oxygen diffusion than in magnetite. Modelling based on these data is consistent with geochronology that shows slow cooling through the blocking temperature of both minerals, suggesting that the low ¹⁸O rims form by exchange with late, low temperature fluids similar to those that infiltrated the rock to serpentinize monticellite and which infiltrated adjacent anorthosite to form late calcite veinlets. In either case, the ion microprobe results indicate that two distinct events are recorded in the post-metamorphic exchange history of these magnetites. Recognition of these events is only possible through microanalysis and has important implications for geothermometry.     

High pressure experimental calibration of the olivine-orthopyroxene-spinel oxygen geobarometer: implications for the oxidation state of the upper mantle

Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f _{O 2}). f _{O 2} was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO₂-C, Ni−NiO, and Fe₃O₄−Fe₂O₃ buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe³⁺/ΣFe in spinel is a linear function of f _{O 2} (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f _{O 2}), but decreases slightly with increasing Cr content in spinel. The Fe³⁺/ΣFe ratio falls with increasing pressure at given Δlog(f _{O 2}), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f _{O 2}. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:

The effect of bulk rock composition on the stability of amphibole in the upper mantle: Implications for solidus positions and mantle metasomatism

Summary The stability of pargasitic amphibole in the upper mantle is a function of water content and bulk rock composition, and under water-undersaturated conditions, the stability of amphibole controls the solidus position. Experiments in the system Tinaquillo peridotite +0.2% H₂O, a refractory peridotite under water-undersaturated conditions, show that amphibole is stable to 1030°C and 26 kb. In contrast, pargasitic amphibole is stable to 1150°C and 30 kb in Hawaiian pyrolite, a more fertile peridotite composition. This indicates that under water-undersaturated conditions, the most fertile part of a crystallizing mantle diapir with an inhomogeneous composition will solidify first while a more refractory component will contain an alkali-rich melt which will have the ability to metasomatize adjacent regions. The relative stabilities of amphibole in refractory and fertile bulk compositions may result in increasing rather than diminishing chemical contrasts in high temperature lherzolite, i.e. a process of metamorphic differentiation. Ti, Fe, Al and Na metasomatism can therefore be considered a normal occurrence associated with the upward migration and solidification of an H₂O-bearing mantle diapir.

---

Der Einfluß der Gesamtgesteins-Zusammensetzung auf die Stabilität von Amphibol im oberen Mantel: Bedeutung für Solidus-Positionen und Mantel-Metasomatose

Zusammenfassung Die Stabilität pargasitischer Amphibole im oberen Mantel ist eine Funktion von Wassergehalt und Gesamtgesteins-Zusammensetzung. Unter wasser-untersättigten Bedingungen, kontrolliert die Stabilität von Amphibol die Solidus-Position. Experimente in dem System Tinaquillo Peridotit +0,2% H₂O, einem refraktären Peridotit unter wasser-untersättigten Bedingungen, zeigen daß Amphibol bis 1030°C und 26 Kb stabil ist. Im Gegensatz dazu ist pargasitische Hornblende in einem Hawaii-Pyrolit, von mehr fertiler Peridotit-Zuammensetzung, bis 1150°C und 30 Kb stabil. Das zeigt, daß bei wasser-untersättigten Bedingungen der am meisten produktive Teil eines kristallisierenden Mantel-Diapirs mit inhomogener Zusammensetzung sich zuerst verfestigen wird, während eine mehr refraktäre Komponente eine alkali-reiche Schmelze enthalten wird, die wiederum die Fähigkeit hat, umliegende Bereiche metasomatisch zu beeinflussen. Die relativen Stabilitäten von Amphibol in refraktären und fertilen Gesamtzusammensetzungen können dazu führen, daß die chemischen Gegensätze in Hochtemperaturlherzoliten eher zunehmen als abnehmen, d. h. ein Prozeß metamorpher Differentiation. Ti, Fe, Al und Na Metasomatose können deshalb als ein verbreiteter Vorgang, der mit der Aufwärtsbewegung und Verfestigung eines H₂O-führenden Mantel-Diapirs assoziiert ist, betrachtet werden.

---

---

With 4 Figures     

Littoral '92

Reports

Littoral '92     

A layered basic intrusion,deformed and metamorphosed in granulite faciès of the Sri Lanka basement

A layered basic intrusion has been found in the Central Granulite Belt of the Sri Lanka continental basement. It intruded parallel to bedding, before all or early during deformation of neighbouring metasediments. Deformation, affecting metasediments and the intrusion alike, includes flattening to c. 1/20 of the original thickness and NNW-stretching to c. 20 times the original length. The intrusion is now 170–300 m thick. Most of the deformation was acquired under granulite facies metamorphism. The intrusion was then folded, still at high T, by a large F₄-synform with an axis parallel to str₁ and a steep axial plane. A steep axial plane cleavage and minor folds are related to this big fold. Stretching continued along its axis. Late during formation of this fold a granite intruded, mainly following S₄ cleavage planes. The intrusion shows a homogeneous gabbroic series at the bottom, followed upwards by a differentiated and layered series. A thin sequence of ultramafic rocks occurs near the middle. This indicates multiple melt-injection. More homogeneous partly biotite-bearing amphibolites form the top of the succession. Magmatic layering is well preserved, but no magmatic minerals or grain fabrics have escaped deformation or metamorphism. Static annealing under granulite facies conditions outlasted all deformation and was accompanied and followed by the beginning of cooling. Hornblende-Plagioclase coronas formed round garnets at this stage. Geochemical work, carried out by STOSCH (1991) on our samples, confirms the cumulate nature of the rocks.

---

Zusammenfassung Eine geschichtete Basische Intrusion wurde im Central Granulite Belt der tiefen, kontinentalen Kruste Sri Lankas entdeckt. Sie intrudierte parallel zur Schichtung in benachbarte Sedimente, vor aller oder sehr früh in deren Deformation. Die Deformation, die Sedimente und die Intrusion in gleicher Weise betraf, führte zu Plättung auf das ca. 1/20 der Ausgangsdicke und zu NNW-Streckung auf das ca. 20fache der Ausgangslänge. Heute ist die Intrusion 170–300 m dick. Der Hauptteil der Deformation wurde unter Granulit-Fazies-Bedingungen erworben. Noch bei hoher T wurde die Intrusion durch eine große F₄-Falte gefaltet. Deren Achse liegt parallel der Streckungsrichtung, stri, ihre Achsenebene ist steil. Eine steile, Achsenebenen-parallele S₄-Schieferung und kleinere Falten entstanden mit ihr. Während der Bildung dieser Falte hielt die Streckung parallel ihrer Achse an. Spät während ihrer Bildung intrudierte ein Granit. Er folgt im wesentlichen S₄. Die Intrusion beginnt unten mit einer homogenen, gabbroiden Serie. Nach oben folgt eine differenzierte, geschichtete. Ein dünnes Paket ultramafischer Lagen erscheint nahe der Mitte. Es weist auf multiple Schmelz-Zufuhr hin. Homogenere Amphibolite, teils mit Biotit, bilden den obersten Teil. Magmatischer Lagenbau ist gut erhalten, lokal mit Gradierung. Magmatische Minerale oder Korngefüge haben Deformation und Metamorphose nicht überlebt. Statische Temperung unter Granulit-Fazies-Bedingungen überdauerte alle Deformation. Sie beginnt und dauert an bei bereits sinkender T. Hornblende-Plagioklas-Koronas bilden sich in diesem statischen Endstadium. STOSCH (1991) untersuchte unsere Proben von der Intrusion geochemisch. Er bestätigte die Kumulatnatur der Gesteine.

---

Résumé Une intrusion basique litée a été découverte dans la ceinture centrale granulitique du socle continental du Sri Lanka. L'intrusion s'est effectuée parallèlement à la stratification, avant la déformation des métasédiments encaissants ou tout au début de celleci. La déformation, qui affecte à la fois les métasédiments et l'intrusion, comporte un aplatissement jusqu'à ± 1/20 de l'épaisseur d'origine, et un allongement de ± 20 fois en direction NNW. L'intrusion présente actuellement une épaisseur de 170 à 300 m. La plus grande part de la déformation a été acquise dans les conditions du faciès des granulites. L'intrusion a ensuite été plissée, toujours à haute T, en un large synforme F₄ dont l'axe est parallèle à l'allongement stri et dont le plan axial est vertical. Ce grand pli est accompagné d'une schistosité S₄ plan-axiale redressée et de plis secondaires. L'allongement s'est poursuivi parallèlement à son axe. A la fin de la formation de ce pli, un granite s'est intrudé, qui suit en gros S₄. L'intrusion comporte à sa base une série gabbroïque homogène, suivie vers le haut par une série litée et différenciée. Elle contient, vers son milieu, une intercalation mince de roches ultramafiques. Ceci implique des injections répétées de magma. Le sommet est formé d'amphibolites homogènes partiellement biotitiques. Le litage magmatique est bien conservé, mais aucun minéral ou fabrique magmatique n'a échappé à la déformation et au métamorphisme. Un recuit statique dans les conditions granulitiques a suivi la déformation; il a été accompagné et suivi par le début du refroidissement. A ce stade, des couronnes à hornblende-plagioclase se sont formées autour des grenats. Une étude géochimique, effectuée en 1991 par Stosch sur nos échantillons confirme le caractère de cumulat des roches.

---

- . , . , , 1/20 20- NNW . 170–300 . . F₄, str₁, . , S₄, . . . S₄. , , . . , , . coxpa . , .. . , . . . . STOSCH (1991) .

---

List of abbreviations ss sedimentary bedding - s₁ first cleavage, plane of first flattening - str₁ Direction of first stretching; although L is usually used for lineations of different kind, including stretching, we use this term to point out that extension is proved in each case - F₂ second folds = first folds folding s₁ - s₂ second cleavage or plane of flattening - F₃ third folds - s₃ third cleavage or plane of flattening - F₄ fourth folds, folding s_1,2,3 and F_1,2,3 - s₄ fourth cleavage or plane of flattening - str₄ direction of fourth stretching - F_5,6 fifth and sixth folds - gf(m) granulite facies (metamorphism) - af(m) amphibolite facies (metamorphism) - KNa-f KNa-feldspar - pg plagioclase - f feldspar - opx orthopyroxene - cpx clinopyroxene - px pyroxene - hb hornblende - bi biotite - cc calcite - do dolomite - qz quartz - mt magnetite     

Geochemistry of Gneiss-Granulite transformation in the “incipient charnockite” zones of southern India

Summary Upper amphibolite facies gneisses in the southern Indian Shield show local transformation into veins, clots and patches of orthopyroxene-bearing dry granulites (incipient charnockites). Depending upon the protolith composition, these desiccated zones are classified into ortho- and para-charnockites and have developed within rocks of distinct mineralogy and chemistry at different time intervals through the structurally-controlled influx of carbon dioxide-rich fluids. Our geochemical investigations at five critical quarry sections indicate that the incipient charnockites have undepleted chemistry and very low K/Rb values. In the paracharnockite localities, where granulite formation is characterized by consumption of garnet, biotite and quartz to produce orthopyroxene, loss of Rb and Ba and enrichment of Ti are observed. In contrast, the orthocharnockite localities show marked LILE enrichment with gain of K, Rb and Ba and loss of CaO, suggesting extensive replacement of plagioclase in the gneisses by K-feldspar in the charnockite through K-Na-Ca exchange reactions with influxing carbonic fluids. The marked depletion in Fe, Mg, Ti and P in these rocks correlates with progressive dissolution of hornblende, biotite, magnetite and accessory apatite. Our study indicates that gneiss to granulite transformation, even if on a local scale, is not an isochemical phenomenon, but attended by distinct element mobilities, although they are contrastingly different from the geochemical trends in some regional high grade terrains.

---

Geochemie von Gneiss-Granulit-Übergängen in den Incipient Charnockite Zonen von Süd-Indien

Zusammenfassung Gneise der oberen Amphibolit-Fazies im Südteil des Indischen Schildes zeigen lokal Umwandlungen in Adern, and unregelmäßigen Bereichen von orthopyroxen-führenden trockenen Granuliten (Incipient Charnockites). In Abhängigkeit von der Zusammensetzung des Ausgangsgesteins werden diese Zonen in Ortho- und Paracharnockite eingeteilt. Sie entwickelten sich in Gesteinen von charakteristischer mineralogischer und chemischer Zusammensetzung zu verschiedenen Zeit-Intervallen durch die tektonisch kontrollierte Zufuhr von kohlendioxid-reichen Fluiden. Unsere geochemischen Untersuchungen an fünf strategisch ausgewählten Steinbruchen zeigen, daß die Incipient Charnockite eine nicht verarmte chemische Zusammensetzung und sehr niedrige K/Rb Werte haben. In den Paracharnockit-Lokalitäten, wo Granulitbildung charakterisiert wird durch das Verschwinden von Granat, Biotit und Quartz, aus denen Orthopyroxene gebildet werden, ist Verlust von Rb und Ba und Anreicherung an Ti zu beobachten. Im Gegensatz dazu zeigen die Orthocharnockite eindeutige LILE Anreicherung mit Zunahme von K, Rb, und Ba und Verlust von Ca0. Dies weist auf extensiven Ersatz von Plagioklas in den Gneisen durch K-Feldspat in den Charnockiten durch K-Na-Ca Austausch-Reaktionen mit zugeführten C0₂-Fluiden hin. Die deutliche Verarmung an Fe, Mg, Ti und P in diesen Gesteinen wird mit zunehmender Auflösung von Hornblende, Biotit, Magnetit und akzessorischem Apatit erKlärt. Unsere Untersuchungen zeigen, daß die Gneis-Granulit Transformation auch im lokalen Maßstab nicht ein isochemisches Phänomen ist, sondern durch charakteristische Elementtransporte charakterisiert wird. Diese unterscheiden sich jedoch deutlich von den geochemischen Trends, die in einigen regional-metamorphen high grade terrains zu beobachten sind.[/p]

     

The structural state of the former lower continental crust in Calabria (S. Italy)

In the Northern Serre (S. Italy), a continuous section through a former lower continental crust is exposed (Schenk 1984, 1985). These granulite facies rocks have not been penetratively deformed during their uplift to higher crustal levels. Therefore, they allow to study the structural state of the lower continental crust. Most rockforming minerals, among them ortho- and clinopyroxene and cordierite, show recrystallization structures. Quarz basal subgrain boundaries are developed in lower levels of the lower crust and disappear toward higher levels. In addition to dimensional orientations of the rockforming minerals, the preferred crystallographic orientations of plagioclases, cordierite, amphibole, pyroxenes and, rarely, quartz reflect the strain orientation of the prograde high-T deformation. During this deformation, the stretching direction was constant NNE-SSW throughout the exposed lower crustal section. Shear indicators are rare. This points to the fact that deformation has been homogeneous and coaxial flattening. There is only a small variation in orientation and strength of textures throughout the exposed lower crust. Therefore, neighbouring layers of different composition rather than different deformation might serve as seismic reflectors in the former lower crust.

---

Zusammenfassung In der nördlichen Serre (Süditalien) ist ein zusammenhängender Bereich einer ehemaligen kontinentalen Unterkruste aufgeschlossen (Schenk 1984, 1985). Diese granulitfaziellen Gesteine sind bei ihrem Aufstieg in höhere Krustenbereiche nicht durchgreifend überprägt worden. Deshalb läßt sich an ihnen noch der strukturelle Zustand der ehemaligen Unterkruste studieren. Außer in Feldspäten, Quarz und Amphibol tritt auch in Ortho- und Klinopyroxen und in Cordierit Rekristallisation auf. In tieferen Krustenniveaus sind im Quarz basisparallele Subkorngrenzen entwickelt, die in höheren Krustenbereichen nicht auftreten. Sowohl die Gestaltregelungen der gesteinsbildenden Minerale als auch die kristallographischen Plagioklas-, Cordierit-, Amphibol-, Pyroxen- und (seltener) Quarzregelungen spiegeln die Strain-orientierung der prograden hochtemperierten Deformation wider. Während dieser Deformation blieb die Streckung im gesamten Unterkrustenbereich konstant NNE-SSW orientiert. Scherindikatoren sind selten. Beides deutet darauf hin, daß die Deformation homogen und als koachsiale Plättung abgelaufen ist. Im gesamten aufgeschlossenen Unterkrustenbereich variieren weder Intensität noch Orientierung der kristallographischen und gestaltlichen Regelungen der gesteinsbildenden Minerale wesentlich. Deshalb sollten in der ehemaligen Unterkruste Lagen unterschiedlicher Deformation weniger als seismische Reflektoren in Frage kommen als Lagen unterschiedlicher Zusammensetzung.

---

Résumé Le Massif de la Serre Septentrionale en Calabre (Sud de l'Italie) représente un tronçon d'une ancienne croûte continentale profonde (Schenk 1984, 1985). Les roches du faciès granulite qui le constituent n'ont pas subi de déformation penetrative lors de leur ascension dans les niveaux plus superficiels de la croûte. Leur étude permet donc de reconstruire les caractéristiques structurales de l'ancienne croûte profonde. Non seulement les feldspaths, le quartz et l'amphibole, mais encore l'orthopyroxène, le clinopyroxène et la cordiérite ont recristallisé. Dans les niveaux les plus profonds de la croûte on observe dans les cristaux de quartz des bordures de sous-grains parallèles à la base. Celles-ci n'apparaissent plus dans les niveaux plus superficiels. L'orientation des cristaux des minéraux constitutifs des roches, de même que l'orientation des réseaux cristallins du plagioclase, de la cordiérite, de l'amphibole, du pyroxène et (mais plus rarement) du quartz réflètent la direction de contrainte de la phase de déformation prograde de haute température. Pendant cette phase de déformation, la direction d'extension est demeurée NNE-SSW. Les témoins de cisaillement sont rares, ce qui montre que la déformation s'est effectuée de façon homogène, en relation avec un aplatissement coaxial. Les textures varient très peu en orientation comme en intensité dans toute la coupe de croûte profonde exposée. En conséquence, l'existence de réflecteurs sismiques devrait refléter des différences dans les compositions minéralogiques des roches plutôt que dans leurs caractéristiques structurales.

---

Serre (Schenk, 1984, 1985). . . , , . , , . , , , , () . NNE-SSW. . , . , , . , , .