Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.     

Boron incorporation into mullite

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria     

AERIAL SURVEY: COLONY OF HONG KONG

This paper describes the planning and implementation of a very extensive aerial survey contract undertaken by Hunting Surveys on behalf of the Hong Kong Government. From photography carried out during January and February 1963, photogrammetric plotting at 1 : 600 and 1 : 1200 proceeded steadily over a period of 5 years to the point where all but the highest land in the Colony had been surveyed at one or other of these two large scales. The problems arising from the rather unique terrain conditions and the urban and industrial development of Hong Kong are dealt with mainly from the photographic and photogrammetric aspect but reference is made to the contribution of the Crown Lands and Survey Office of the Public Works Department of Hong Kong, who provided all ground control and undertook field verification.     

Microstructures of High-grade Metamorpbic Rocks at Broken Hill, Australia

Frequency distributions of true interfacial angles in high-grade,regional metamorphic rocks from Broken Hill indicate that interfacialtension varies with relative crystallographic orientation incommon minerals. In some single-phase aggregates (e.g. quartz,feldspar, garnet, and calcite) the grains are equant and polygonal,anisotropy of interfacial tension having only a small effecton the appearance of such aggregates. This is also true of two-phaseaggregates of these phases, but their appearance is complicatedby the presence of inclusions, the relative proportions of ihephases, and the characteristic dihedral angle formed by a grainof one phase in contact with two grains of the other. In phases for which interfacial tension is more orientation-dependent,crystal forms exert some control on the appearance of the microstructure.For example, in hornblende and pyroxene aggregates, some interfacesare parallel to planes of the form {110}, although most areirrational. In still more anisotropic phases, low-energy forms(e.g. {001} of biotite and {110} of sillimanite) are very stable,giving rise to a predominance of planar, rational boundariesover curved, adjustment boundaries. Anisotropy of interfacial tension is expressed in the shapesof inclusions. However, even where strongly anisotropic mineralsare involved, inclusions with partly planar boundaries occuralongside inclusions with completely curved boundaries.     

THE COMPUTATION OF SINGLE STRIPS IN PLAN

This paper discusses a simple method of computing independent strips under certain reasonable approximations. It is shown that, if the method is regarded as if it were computation by polynomials, the order of the polynomial is decided by the nature of the control provided and not by the number of controlled models. This conclusion should throw some light on the vexed (and perennial) problem of the choice of orders for polynomials.     

Magnetic pinch in relation to the lightning stroke

Summary The application of the snow plow approximation to the magnetic pinch effect in the return stroke of lightning is described. Results are presented for a constant electric field and for a measured stroke current. In general, the solutions indicate that the magnetic pinch effect is important for cases of high currents, small channel diameters, and low degrees of ionization.     

Sedimentpetrographische Untersuchung des Tones von Fredelsloh

Ohne Zusammenfassung     

Identification of chlorite and chlorite-related minerals in sediments

A scheme is presented for the identification and classification of chlorite and related minerals in sediments which is mainly based on X-ray characteristics of the orginal sample and the sample heated at 350°C and treated with K⁺ and with glycerol. Examples are given. It is emphasized that additional data about clay mineral genesis, electron microscopy, infrared spectroscopy and chemical analyses are needed for the ordening of a certain mineral in the proposed scheme. Many names of minerals so far found to occur in the clay separate of sediments proved to be synonymous (52 of a total of 88) and thus should be abandoned. They only give confusion and needlessly increase the many difficulties which already exist in the identification, classification and quantitative determination of this complicated group of minerals of about 36 well defined specimens which may be found in sediments.     

Measurements of radio noise at 0.700 mc and 2.200 mc from a high-altitude rocket probe

Radio noise observations at frequencies of 0·700 Mc and 2·200 Mc were made at altitudes between 3000 and 11,000 km from a Blue Scout Jr. high-altitude rocket probe on 30 July 1963. A steady background flux of (7·5₋₃⁺⁶) × 10⁻¹⁹ W m⁻²)(c/s)⁻¹ at 0·700 Mc and (1·8^+1.0_−0.5 × 10⁻¹⁹ W m⁻² (c/s)⁻¹ at 2·200 Mc was observed. Assuming a galactic origin of the observed fluxes at both frequencies, the averaged sky brightnesses are b(0·700 Mc) = (6₋₃⁺⁵) × 10⁻²⁰ W m⁻² (c/s)⁻¹ sr⁻¹b(2·200 Mc) = (1.4^+1.0_−0.5 × 10⁻²⁰ W m⁻² (c/s)⁻¹ sr⁻¹ The observed brightness at 2·200 Mc is in reasonable agreement with the results of other observers. The apparent brightness at 0·700 Mc is, however, greater than was expected from previous observations. An alternative source of the 0·700 Mc flux in the terrestrial exosphere, as well as characteristics of several noise bursts observed during the flight, is briefly discussed.