A strontium,neodymium and oxygen isotope study of hydrothermal metamorphism and crustal anatexis in the Trois Seigneurs Massif,Pyrenees, France

Nd, Sr, and O isotope analyses have been made on metamorphic and igneous rocks and minerals from a 310–340 Ma Hercynian-age metamorphic terrane in the Pyrenees, France. Lower Paleozoic shales and phyllites have ⁸⁷Sr/⁸⁶Sr values of 0.707–0.717 at 310 Ma, but model values at 310 Ma of 0.709–0.736 (based on assumed depositional age of 450 Ma and an initial ⁸⁷Sr/⁸⁶Sr=0.707). On a regional scale, ⁸⁷Sr/⁸⁶Sr was homogenized to about 0.713 to 0.717 in the higher-grade pelitic schists during metamorphism. Much of this ⁸⁷Sr/⁸⁶Sr exchange occurred at very low grades (below the biotite isograd), but significant changes also accompanied the δ ¹⁸O lowering of the phyllites (+13 to +16) during their transformation to andalusite- and sillimanite-grade schists (δ ¹⁸O=+11 to +12); all of these effects are attributed to pervasive interactions with hydrothermal fluids (Wickham and Taylor 1985). The data also show that a syn-metamorphic plutonic complex, dominated by a biotite granite body, was derived by mixing of a relatively mafic magmatic end-member (⁸⁷Sr/⁸⁶Sr～ 0.7025–0.7050 and δ ¹⁸O～ +7.5 to +8.0) with two metasedimentary sources, both having ⁸⁷Sr/⁸⁶Sr～0.715 and δ ¹⁸O～ +10.0 to +12.0, but with one being more homogeneous than the other. The more homogeneous component and the (mantle-derived?) magmatic end-member dominate at low structural levels within the complex. The less homogeneous end-member that dominates at high levels is clearly derived from the local Paleozoic pelitic schists. A Rb-Sr age of 330±20 Ma was obtained on hornblende from a deep level within the complex, which fixes this age for the regional metamorphism, as well. Although a post-metamorphic granodiorite magma body at Trois Seigneurs also displays heterogeneities in δ ¹⁸O and ⁸⁷Sr/⁸⁶Sr (and thus does not give a clear-cut Rb-Sr isochron), the data are consistent with an emplacement age between 260 and 310 Ma, similar to ages of other late granodiorites in the Pyrenees. ¹⁴³Nd/ ¹⁴⁴Nd is very uniform within the Hercynian crust, both at Trois Seigneurs (? _Nd=?3 to ?7) and elsewhere in the Pyrenees; almost all igneous lithologies have depleted-mantle, mid-Proterozoic model ages, consistent with efficient recycling of crustal material following original crustal accretion in this area at about 1600 Ma or earlier. Rb-Sr mineral ages exhibit a complex cooling history reflecting late Hercynian and Mesozoic thermal events. Our results show that profound homogenization of the ⁸⁷Sr/⁸⁶Sr and ¹⁸O/¹⁶O ratios of large volumes of the crust can occur during regional metamorphism and crustal anatexis, particularly in regions undergoing extensional tectonics. Such processes can significantly modify the isotopic compositions of the protoliths of granitic magmas; this may explain why many peraluminous Hercynian granitoids of Western Europe have anomalously low (⁸⁷Sr/⁸⁶Sr) initial values compared to their probable sedimentary parent rocks.     

River channel and bar patterns explained and predicted by an empirical and a physics‐based method

Our objective is to understand general causes of different river channel patterns. In this paper we compare an empirical stream power‐based classification and a physics‐based bar pattern predictor. We present a careful selection of data from the literature that contains rivers with discharge and median bed particle size ranging over several orders of magnitude with various channel patterns and bar types, but no obvious eroding or aggrading tendency. Empirically a continuum is found for increasing specific stream power, here calculated with pattern‐independent variables: mean annual flood, valley gradient and channel width predicted with a hydraulic geometry relation. ‘Thresholds’, above which certain patterns emerge, were identified as a function of bed sediment size. Bar theory predicts nature and presence of bars and bar mode, here converted to active braiding index (B_i). The most important variables are actual width–depth ratio and nonlinearity of bed sediment transport. Results agree reasonably well with data. Empirical predictions are somewhat better than bar theory predictions, because the bank strength is indirectly included in the empirical prediction. In combination, empirical and theoretical prediction provide partial explanations for bar and channel patterns. Increasing potential‐specific stream power implies more energy to erode banks and indeed correlates to channels with high width–depth ratio. Bar theory predicts that such rivers develop more bars across the width (higher B_i). At the transition from meandering to braiding, weakly braided rivers and meandering rivers with chutes are found. Rivers with extremely low stream power and width–depth ratios hardly develop bars or dynamic meandering and may be straight or sinuous or, in case of disequilibrium sediment feed, anastomosing. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparative study of different wavelets for developing parsimonious Volterra model for rainfall-runoff simulation

Although the Volterra models are non-parsimonious ones, they are being used because they can mimic dynamics of complex systems. However, applying and identification of the Volterra models using data may result in overfitting problem and uncertainty. In this investigation we evaluate capability of different wavelet forms for decomposing and compressing the Volterra kernels in order to overcome this problem by reducing the number of the model coefficients to be estimated and generating smooth kernels. A simulation study on a rainfall?runoff process over the Cache River watershed showed that the method performance is successful due to multi-resolution capacity of the wavelet analysis and high capability of the Volterra model. The results also revealed that db2 and sym2 wavelets have the same high potential in improving the linear Volterra model performance. However, QS wavelet was more successful in yielding smooth kernels. Moreover, the probability of overfitting while identifying the nonlinear Volterra model may be less than the linear model.     

Structural analysis of the superficial deformation of the 1969 Pariahuanca earthquakes (Central Peru)

An analysis of the superficial structures related to the Huaytapallana fault is presented. This fault was formed during the Pariahuanca earthquakes of July 24 and October 1, 1969. The fault trends N120E and is 3.5 km long, the displacement is 0.70 m left-lateral slip and 1.6 vertical upthrust. At most places the fault appears as a steep flexure associated with open fractures and mostly gravity folds, all of them almost parallel to it. Oblique, “en échelon” shears, often associated with small folds, are developed in the turf which is partly detached from its substratum. The analysis of these fractures is consistent with a mean N65E shortening direction. The compressional and dilatational quadrants obtained by means of this analysis fit rather well with the focal-mechanism data. On the other hand, some of the en échelon fold and fault systems provide a model of similar features with a magnitude of several kilometers.     

TOPOGRAPHIC SHADING AND GEOGRAPHICAL PATTERNS OF DIRECT SOLAR RADIATION IN MOUNTAINOUS REGIONS*

Topographic shading curtails the period and complicates the geographic patterns of insolation in mountainous areas. Maps derived from oblique aerial photographs of shadow lines cast by the irregular, mountainous east horizon in Provo, Utah are used as a case study to illustrate an alternative to existing techniques of solar radiation data collection. For study areas of several hundred square kilometers, this method may be superior in resolution and at the same time more error free and economically feasible than other methods. Measurement of solar inputs received at sample stations scattered through the mapped area show that the phenomenon of topographically delayed sunrise has a distinct effect on daily totals of radiation in the manner suggested by the maps.     

On radiative forcing of sulphate aerosol produced from ion-promoted nucleation mechanisms in an atmospheric global model

A significant fraction of the total number of particles present in the atmosphere is formed by nucleation in the gas phase. Nucleation and the subsequent growth process influence both number concentration of particles and their size distribution besides chemical and optical properties of atmospheric aerosols. Sulphate aerosol nucleation mechanisms promoted by ions have been evaluated here in a tropospheric interactive chemistry-aerosol module for mass and number concentration in a global atmospheric model. The indirect radiative forcing of sulphate particles is assessed in this model; indirect radiative forcing is different for ion-induced (IIN) and ion-mediated (IMN) mechanisms. The indirect radiative forcing in 10-year simulation runs has been calculated as ?1.42?W/m² (IIN) and ?1.54?W/m² (IMN). The 5% emission of primary sulphate particles in simulations changes the indirect radiative forcing from ?1.42 to ?1.44?W/m² for IIN case, and from ?1.54 to ?1.55 W/m² for the IMN case. More precisely, owing to greater nucleation rates, IMN mechanisms produces greater cooling than the IIN mechanisms in the backdrop that both mechanisms produce almost identical distribution of CDNC in their pre-industrial runs. The inclusion of primary particles in simulations with IIN and IMN mechanisms increases both CDNC and the indirect radiative forcing.     

Exploration for scheelite in East Greenland — A case study

An intensive scheelite exploration program was carried out in Precambrian crystalline and sedimentary rocks intruded by granites of Precambrian and Caledonian ages in East Greenland (70–74°30′N). Previous heavy-mineral panning (2100 samples within an area of 100,000 km²) formed the basis for selection of scheelite-anomalous subregions (1550 km²)In the subregions, pan-concentrate samples were taken from first- and second-order rivers and from mid and side moraines of active glaciers. All samples were studied in the field under UV light, and scheelite grains were counted. A consideration of the distribution of scheelite in the samples together with the river and glacial drainage systems, led to definition of the potential source areas of the scheelite within localities of 2–5 km².Within the localities, panning of scree fines (samples every 100–200 m along talus slopes) and UV-light traverses at night led to the finding of outcropping or sub-outcropping scheelite mineralisation. Scheelite was observed associated with granite-carbonate contact zones, quartz vein stockworks, and fault zones in limestones, at nine localities within the 300-km-long zone of investigation.The heavy-mineral panning method with the counting of scheelite grains in the field and the subsequent definition of potential scheelite-bearing areas has the advantage that it is possible to execute a program from the subregional to the outcropping mineralisation stage in one field season. The investigation in this case was performed by five geologists during the 1979 2.5-month field season.     

Gzhelian fusulinids first discovered in central Iran

Gzhelian deposits established in Iran for the first time are described. They rest with a considerable hiatus on the Moscovian deposits constituting, along with Asselian strata, an integral carbonate succession of the Zaladu Formation in eastern Iran. The Zaladu Formation is correlative with the Vazhnan Formation of the Abadeh region (central Iran) and the Dorud Formation of the Elburz (Alborz) Mountains. An assemblage of Gzhelian fusulinids from the studied section is well comparable with the assemblage of the Ultradaixina bosbytauensis Zone distinguished in the uppermost Gzhelian of the Darvaz, Fergana, the Southern Urals, Donetsk Basin, and Carnic Alps. Two new species of the genus Schellwienia (Sch. anarakensis and Sch. stocklini) are described. Gzhelian and Asselian fusulinids found in the section are figured in two paleontological plates.     

Effect of free surface and strut on fins attached to a strut

An extensive experimental and computational investigation of the combined and separate effects of free surface and body on the lift characteristics of a pair of fins attached to a strut and fin alone is conducted. The results reveal that the free-surface effect becomes significant when the depth of submergence to chord ratio (H/c) is less than three. The effect of the strut is also realized for shallower depth of submergence of the fins through free-surface deformation leading to a significant change in the incidence angle of the flow to the fins. The numerical results based on the Higher Order Boundary Element Method with the linearized free-surface condition show good agreement with the experimental results for fin (foil) alone even at shallow submergence, but some discrepancies appear for the fin attached to the strut at higher speeds mostly due to the neglect of the nonlinear free-surface effect.