From China’s Heavy Precipitation in 2020 to a “Glocal” Hydrometeorological Solution for Flood Risk Prediction

The prolonged mei-yu/baiu system with anomalous precipitation in the year 2020 has swollen many rivers and lakes,caused flash flooding,urban flooding and landslides,and consistently wreaked havoc across large swathes of China,particularly in the Yangtze River basin.Significant precipitation and flooding anomalies have already been seen in magnitude and extension so far this year,which have been exerting much higher pressure on emergency responses in flood control and mitigation than in other years,even though a rainy season with multiple ongoing serious flood events in different provinces is not that uncommon in China.Instead of delving into the causes of the uniqueness of this year’s extreme precipitation-flooding situation,which certainly warrants in-depth exploration,in this article we provide a short view toward a more general hydrometeorological solution to this annual nationwide problem.A“glocal”(global to local)hydrometeorological solution for floods(GHS-F)is considered to be critical for better preparedness,mitigation,and management of different types of significant precipitation-caused flooding,which happen extensively almost every year in many countries such as China,India and the United States.Such a GHS-F model is necessary from both scientific and operational perspectives,with the strength in providing spatially consistent flood definitions and spatially distributed flood risk classification considering the heterogeneity in vulnerability and resilience across the entire domain.Priorities in the development of such a GHS-F are suggested,emphasizing the user’s requirements and needs according to practical experiences with various flood response agencies.     

Ostracode carbonate δ18O- and δ13C-signature of hydrological and climatic changes affecting Lake Neuchâtel,Switzerland, since the latest Pleistocene

Floating and grounded peat plateaus were studied in fens in the Yukon Territory (Canada). The peat deposit may be over 4 m thick and consists of a lower bed of aquatic peat overlain by humic fen peat, mesic fen peat and woody peat. Permafrost in the grounded peat plateaus is older than the 1200 year old White River Ash, whereas permafrost in the floating peat plateau is younger.Peat accumulation rates since 1200 years B.P. were greater in the fens (85–100 cm) than on the surface of the peat plateaus (25–55 cm). Where the peat plateau is free-floating, it will persist until the climate changes, causing the icy core to thaw. Where the peat plateau is frozen to the mineral substrate, it slowly drowns since the fen peat accumulates faster than the woody peat. This drowning results in degradation of the landform independently of the climate. Only degradation of floating peat plateaus can be used to identify climatic changes.This publication is the first paper in a series of papers presented at the session on Past Climatic Change and the Development of Peatlands at the ASLO and SWS Meetings in Edmonton, Canada, May 30–June 3, 1993. Dr. P. Kuhry and Dr S. C. Zoltai are serving as Guest Editors.     

Australian ‘gayborhoods’ and ‘lesborhoods’: a new method for estimating the number and prevalence of adult gay men and lesbian women living in each Australian postcode

ABSTRACT

Gay men and lesbian women often demonstrate unique settlement patterns, forming what have been referred to as ‘gayborhoods’. This study sought to provide the first postcode-level estimates of population size and prevalence of gay and lesbian people in Australia. Data on same-gender-partnered households from the Australian Census were combined with information from six different surveys conducted from 2011 to 2017. We estimated that in 2016 there were 132,203 gay men (1.5% of adult males; 95% CI: 1.4–1.6) and 79,931 lesbian women (0.9% of adult females; 95% CI: 0.8–1.0) in Australia. While many postcodes were sparsely populated by gay and lesbian people (40.1% had prevalences of <0.1%), 24.6% were moderately populated (prevalences in the 50-95th percentile) and 2.7% were highly populated (95th percentile). By jurisdiction, the Australian Capital Territory had the highest prevalences of gay men (2.1%; 95% CI: 2.0–2.2) and lesbian women (1.5%; 95% CI: 1.4–1.6). Although the majority of highly populated postcodes were found in major cities (83.7%), some were also found in regional and remote area (16.3%). This method can be applied in other countries to enhance populate estimates. The accompanying dataset can be used to guide service delivery, conduct geographically contextualised research and develop policies relevant to gay men and lesbian women in Australia.     

Assessing the potential of reservoir outflow management to reduce sedimentation using continuous turbidity monitoring and reservoir modelling

In‐stream sensors are increasingly deployed as part of ambient water quality‐monitoring networks. Temporally dense data from these networks can be used to better understand the transport of constituents through streams, lakes or reservoirs. Data from existing, continuously recording in‐stream flow and water quality monitoring stations were coupled with the two‐dimensional hydrodynamic CE‐QUAL‐W2 model to assess the potential of altered reservoir outflow management to reduce sediment trapping in John Redmond Reservoir, located in east‐central Kansas. Monitoring stations upstream and downstream from the reservoir were used to estimate 5.6 million metric tons of sediment transported to John Redmond Reservoir from 2007 through 2010, 88% of which was trapped within the reservoir. The two‐dimensional model was used to estimate the residence time of 55 equal‐volume releases from the reservoir; sediment trapping for these releases varied from 48% to 97%. Smaller trapping efficiencies were observed when the reservoir was maintained near the normal operating capacity (relative to higher flood pool levels) and when average residence times were relatively short. An idealized, alternative outflow management scenario was constructed, which minimized reservoir elevations and the length of time water was in the reservoir, while continuing to meet downstream flood control end points identified in the reservoir water control manual. The alternative scenario is projected to reduce sediment trapping in the reservoir by approximately 3%, preventing approximately 45 000 metric tons of sediment from being deposited within the reservoir annually. This article presents an approach to quantify the potential of reservoir management using existing in‐stream data; actual management decisions need to consider the effects on other reservoir benefits, such as downstream flood control and aquatic life. Copyright © 2012 John Wiley & Sons, Ltd.     

The influence of floodplain geohydrology on the distribution of Sarcocornia pillansii in the Olifants Estuary on the West Coast, South Africa

The distribution of Sarcocornia pillansii (Moss) A.J. Scott was determined by water-table depth and electrical conductivity (EC) of the groundwater. Where the groundwater was accessible (<1.5 m) and had a low EC (<80 mS cm⁻¹), S. pillansii extended its roots down to the water-table where a suitable water potential gradient was shown to exist between the soil and roots. In areas where the groundwater was too deep and/or hypersaline, the plants grew on hummocks. The unconfined aquifer below the floodplain is linked to the estuary and although diurnal tidal waves were dampened, water-table level fluctuations were recorded between tidal events. The complex geomorphology of the floodplain influences groundwater flow, in turn affecting the distribution of the salt marsh vegetation.     

Groundwater flow and contaminant transport modelling at an air weapons range

Numerical modelling was done at the Cold Lake Air Weapons Range, Canada, to test whether the dissolved RDX and nitrate detected in groundwater come from the same sources, and to predict whether contamination poses a threat to the surface water receptors near the site. Military live fire training activities may indeed pose a risk of contamination to groundwater resources, however field investigations on military bases are quite recent, and little information is available on the long-term behaviour of munition residues related contaminants. Very limited information was available about the contaminant source zones, which were assigned based on our knowledge of current training activities. The RDX plume was well represented with the model, but the heterogeneous distribution of nitrate concentrations was more difficult to reproduce. It was nonetheless determined that both contaminants originate from the same areas. According to the model, both contaminants should reach the nearby river, but concentrations in the river should remain very low if the source zone concentration does not change. Finally, the model allowed the recommendation of a new location for the main bombing target, which would offer added protection to the river and the lake into which it flows.     

Studying Resource-Dependent Communities Through a Social-Ecological Lens? Examining Complementarity with Existing Research Traditions in Canada

This article explores the suitability of Ostrom and colleagues' social-ecological systems framework (SESF) for the study of resource-dependent communities in Canada. Through a broad literature about resource-dependent communities in Canada, three main approaches are identified, named staples research, rural development, and sustainability studies. Each of these research traditions is analyzed with regards to a common set of criteria – focus, scale, methods, treatment of institutions, and treatment of environmental dimensions. Research in each category is compared and contrasted with the SESF approach, to identify areas of overlap and divergence. Results indicate that the SESF is unlikely to provide additional benefit in terms of in-depth of social analysis, however, it does provide a unique contribution in terms of its coupled approach to conceiving social and ecological systems and its ability to operationalize these relationships through structured variables.     

A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

The geochemistry of gem opals as evidence of their origin

Seventy-seven gem opals from ten countries were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) through a dilution process, in order to establish the nature of the impurities. The results are correlated to the mode of formation and physical properties and are instrumental in establishing the geographical origin of a gem opal. The geochemistry of an opal is shown to be dependant mostly on the host rock, at least for examples from Mexico and Brazil, even if modified by weathering processes. In order of decreasing concentration, the main impurities present are Al, Ca, Fe, K, Na, and Mg (more than 500 ppm). Other noticeable elements in lesser amounts are Ba, followed by Zr, Sr, Rb, U, and Pb. For the first time, geochemistry helps to discriminate some varieties of opals. The Ba content, as well as the chondrite-normalized REE pattern, are the keys to separating sedimentary opals (Ba > 110 ppm, Eu and Ce anomalies) from volcanic opals (Ba < 110 ppm, no Eu or Ce anomaly). The Ca content, and to a lesser extent that of Mg, Al, K and Nb, helps to distinguish gem opals from different volcanic environments. The limited range of concentrations for all elements in precious (play-of-color) compared to common opals, indicates that this variety must have very specific, or more restricted, conditions of formation. We tentatively interpreted the presence of impurities in terms of crystallochemistry, even if opal is a poorly crystallized or amorphous material. The main replacement is the substitution of Si⁴⁺ by Al³⁺ and Fe³⁺. The induced charge imbalance is compensated chiefly by Ca²⁺, Mg²⁺, Mn²⁺, Ba²⁺, K⁺, and Na⁺. In terms of origin of color, greater concentrations of iron induce darker colors (from yellow to “chocolate brown”). This element inhibits luminescence for concentrations above 1000 ppm, whereas already a low content in U (≤ 1 ppm) induces a green luminescence.