In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Nonparametric Estimates of the Sea State Bias for the Jason-1 Radar Altimeter

The Jason-1 sea state bias (SSB) is analyzed in depth from the first year of GDR products. Compared to previous missions, this work benefits from two aspects of the empirical determination of the SSB from the altimetric data themselves. First, from a methodological point of view, a nonparametric technique (NP) has been developed and largely tested on TOPEX/Poseidon 1, GFO and Envisat data. The NP estimator has proven to be a useful tool in the SSB estimation, and it is now mature enough to be used for a refined analysis. On the other hand, the SSB can be extracted from three different data sets (crossovers, collinear data, and residuals) with different characteristics. It is then possible to cross calibrate various estimations of the SSB models and to determine the most accurate one. A systematic comparison is made between these different estimates for the Jason-1 altimeter. The collinear and crossover data sets yield very similar estimates despite their difference of spatial and temporal distributions. These SSB models assure consistency with the TOPEX mission when comparing Jason-1 and TOPEX residuals during the tandem phase. Thanks to the present work, the impact of the short wavelengths filtering on the SSB estimation is evidenced. More generally, our understanding of potential errors affecting the sea surface height and their impact onto the SSB estimation is also improved.     

La marge continentale au large de l'estérel (France) et les mouvements verticaux pliocènes

Sommaire La région étudiée s'étend au large du massif des Maures, du massif de l'Estérel, des chaînes calcaires provençales et de la bordure alpine (Figure 1). Cette partie de la marge continentale médíterranéenne a été étudiée dans l'optique de la géodynamique en appliquant un ensemble de méthodes géophysiques, géologiques, sédimentologiques et géochimiques.La Méditerranée est l'objet de nombreuses études générales et son histoire tectonique est encore très discutée. Les relations entre la zone centrale (zone A) et les massifs terrestres géologiquement bien connus peuvent aider à la compréhension du cadre structural. L'étude très détaillée présentée ici concerne la marge continentale au large de la Côte d'Azur. Une étude bathymétrique préliminaire avec des profils espacés d'un mille marin a permis de définir un plateau continental peu étendu, une pente continentale abrupte (10–20°) avec des blocs continentaux effondrés. De nombreux canyons empruntent des accidents anciens qui ont rejoué.Des profils en série de sismique continue (Sparker et air gun) ont permis de délimiter la zone A qui comporte de nombreux dômes, de suivre des accidents majeurs, et de montrer des phénomènes sédimentaires et de néotectonique très importants (glissements, effondrements). Ces profils ont été calés avec 50 carottages. Un effondrement de plus de 1000 m depuis le Pliocène a été mis en évidence.La structure profonde a été abordée avec une étude de magnétométrie marine. La synthèse des résultats de sismique réfraction, de gravimétrie et de magnétométrie fait apparître un bombement du manteau sous la zone A avec abaissement rapide de la discontinuité de Moho sous la marge, la présence de volcans enfouis au Sud d'Antibes et de grands accidents de direction NS et EW.L'intérêt de ces résultats a semblé suffisamment important pour qu'un point de cette zone soit proposé pour le programme de forage JOIDES en Méditerranée.

---

This paper deals with the region off the Maures and Estérel Massifs, the Provence calcareous ranges and the Alpine border (Figure 1). This portion of the Mediterranean continental margin has been investigated with the classical methods used in the geosciences: geophysics, geology, sedimentology, geochemistry.Many general studies are dealing with the Mediterranean and its tectonical history is still controversial. The relationship between the central zone (zone A) and the geologically well-known land massifs could help in understanding the structural framework. The present detailed study concerns the continental margin off Côte d'Azur. A relatively narrow continental shelf, a steep continental slope (10–20°) with collapsed continental blocks are defined by preliminary bathymetric studies with a spacing of one nautical mile. Many submarine canyons follow former faults which have been rejuvenated.A series of seismic reflection profiles (sparker and air-gun) provide limits for zone A (with many domes), allow tracing major faults and display important sedimentary and neotectonic processes (sliding, foundering). These profiles have been scaled with 50 cores. Evidence is brought forward for a local subsidence of over 1000 m. The deep structure has been investigated with marine magnetic methods. The results from seismic refraction, gravity and magnetics show a swell of the mantle beneath zone A, with a steep dipping of the M discontinuity under the margin, buried volcanoes south of Antibes and great faults striking NS or EW.These results seem to be important enough to propose a place in this zone of the Mediterranean as a JOIDES drilling site.

---

---

Maintenant au Centre Océanologique de Bretagne, B.P. 337, 29 Brest, France.     

Ostracode carbonate δ18O- and δ13C-signature of hydrological and climatic changes affecting Lake Neuchâtel,Switzerland, since the latest Pleistocene

Floating and grounded peat plateaus were studied in fens in the Yukon Territory (Canada). The peat deposit may be over 4 m thick and consists of a lower bed of aquatic peat overlain by humic fen peat, mesic fen peat and woody peat. Permafrost in the grounded peat plateaus is older than the 1200 year old White River Ash, whereas permafrost in the floating peat plateau is younger.Peat accumulation rates since 1200 years B.P. were greater in the fens (85–100 cm) than on the surface of the peat plateaus (25–55 cm). Where the peat plateau is free-floating, it will persist until the climate changes, causing the icy core to thaw. Where the peat plateau is frozen to the mineral substrate, it slowly drowns since the fen peat accumulates faster than the woody peat. This drowning results in degradation of the landform independently of the climate. Only degradation of floating peat plateaus can be used to identify climatic changes.This publication is the first paper in a series of papers presented at the session on Past Climatic Change and the Development of Peatlands at the ASLO and SWS Meetings in Edmonton, Canada, May 30–June 3, 1993. Dr. P. Kuhry and Dr S. C. Zoltai are serving as Guest Editors.     

Laboratory condensation of refractory dust in protosolar and circumstellar conditions

In order to better understand condensation processes that took place in the solar nebula and to evaluate the effect of kinetics on the condensed matter, we have built an experimental apparatus for studying condensation of multi-elemental refractory gases at high-temperature and low-pressure. The condensation of a Mg-Si-rich gas, with solar interelement ratios of Ca, Al, Mg and Si, and of a Ca-Al-rich gas under a total pressure of ∼4 × 10⁻³ bar at temperatures from 1045 to 1285 °C and for run times of 4-60 min results in direct formation of crystalline oxides or silicates such as corundum, spinel, anorthite, melilite, Al-diopside, forsterite and enstatite. The mineralogy of the condensates, close to that predicted at equilibrium, varies with the duration of an experiment and the temperature of condensation. The chemical reactions between gas and condensates are rapid enough to attain a steady state in less than one hour. The condensation results in chemical fractionation of the gas, i.e. a depletion of the gas in refractory elements at high temperature. Finally, besides revealing the textures of refractory crystals, which condense from a gas of complex chemical composition, this study shows that certain phases, such as spinel, have favored kinetics of condensation. Our experimental results confirm that refractory inclusions in primitive meteorites could have formed by condensation from a hot nebular gas. Similarly, we confirm that crystalline grains can condense at high temperature in the outflows of evolved stars. In both cases, our results indicate that kinetic processes certainly influence grain mineralogy. Kinetic processes must thus be taken into account in modeling the pressure-temperature conditions of circumstellar environments.     

Évolution de l'onde semi-diurne M2 de la marée à Brest de 1846 à 2005

The work of searching, recovering and quality control of ancient sea-level measurements at Brest is presented. This work enables us to complete a study carried out by Cartwright in 1972, which showed a decrease in the tidal M2 semi-diurnal amplitude of 1% per century. After including these ancient data, as well as the last four decades of observations in the analysis, our results show an increase of the amplitude of M2 after 1960 and a decrease before 1880, suggesting a long-period oscillation rather than a steady secular trend. To cite this article: N. Pouvreau et al., C. R. Geoscience 338 (2006).     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.