城市浅层地震勘探过障碍变观设计

在城市浅层地震勘探数据采集中,地震测线经常会遇到河流、桥、交叉路口等地表障碍。为了尽量减小地表障碍造成的影响,需要对观测系统作变观设计。作者分析总结了城市浅层地震勘探中常见障碍以及过障碍变观模式,并开发了浅层地震过障碍变观设计软件,利用此软件可在采集现场快捷地进行过障碍变观。将这种方法应用于实际工作中,有效减小了资料缺失造成的影响,提高了资料的信噪比。该软件能够根据实际工作环境和设备条件在野外现场对观测系统进行灵活变观,设计出合理的过障碍观测系统,有效地提高了变观设计的效率。     

Shales in the Qiongzhusi and Wufeng–Longmaxi Formations: a rock-physics model and analysis of the effective pore aspect ratio

The shales of the Qiongzhusi Formation and Wufeng–Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1) the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2) the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3) organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation (SCA), the differential effective medium (DEM), and Gassmann’s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well.     

Study on the simulation of acoustic logging measurements in horizontal and deviated wells

The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.     

一种基于天基的瞬变电磁高分辨探测小尺度太空碎片的方法

目前,太空碎片的天基探测方法一般是激光雷达法.由于激光雷达的辐射频率一般为可见光或红外波段,在分辨厘米量级的太空碎片时具有一定的优势.但激光雷达在探测时也面临一些客观问题：即（1）难以捕捉快速移动的太空碎片;（2）对目标体穿透能力低;（3）外层空间的强干扰环境对激光雷达的不良影响等.这些问题在一定程度上限制了激光雷达在太空碎片探测方面的应用.本文针对太空碎片体积小、预警距离远和强干扰环境等特点,提出使用高性能瞬变电磁辐射源对远距离、小尺度的太空碎片进行探测.通过三维矢量有限元方法,分析了利用高性能瞬变电磁辐射源的优点,对比不同瞬变电磁辐射源的幅频特性,从发射机理上证明高性能瞬变电磁辐射源在辐射能力与频率带宽方面都优于传统瞬变电磁辐射源.并通过调整脉冲宽度,得到最适合探测本文太空碎片模型的辐射脉冲.最后通过电场分布图和多测道图对太空碎片的明显电场分异结果,证实了高性能瞬变电磁辐射源在探测远距离、小尺度太空碎片方面的有效性.     

垂直气柱中大气微量成分总含量的反演

提出了一种利用地面中等光谱分辨率的太阳红外光谱反演整层大气中某几种微量成分总含量的方法,用逐线积分（ Ｌ Ｂ Ｌ） 法计算整层大气分子吸收,采用差分吸收法测量太阳红外光谱得到实际大气中微量成分的吸收,用最大似然法反演出微量成分的总量。详细分析了这种方法的可行性和反演精度,数值模拟分析和实际测量表明该方法有较高的精度,已把该方法用于监测实际大气中甲烷和水汽总含量的变化。     

几种不同矩阵算法的遥感图像几何精纠正效果比较

分别采用Gauss、Householder及Givens三种变换形式进行遥感图像几何精纠正试验，并将试验结果与商业遥感软件PCI的纠正结果进行比较。结果表明，Givens算法在一至五次多项式纠正中，其总体精度优于其它算法。     

Correcting the TRMM rainfall product for hydrological modelling in sparsely-gauged mountainous basins

This study developed a correction approach to improve the rainfall field estimation using the TRMM rainfall product in a sparsely-gauged mountainous basin. First, Thiessen polygons were generated to define the measurement domain of each raingauge. Second, the rainfall of TRMM pixels in each Thiessen polygon was corrected using a benchmark method based on the difference between the monthly rainfall estimated by a raingauge and the TRMM pixel that possessed a gauge station (referred to as a gauged pixel). Third, the rainfall values in the gauged pixels were adjusted to the weighted average value of the gauge rainfall and corrected pixel rainfall. Finally, the rainfall in the non-gauged TRMM pixels was corrected as the sum of two terms. The first term is the adjusted rainfall in the corresponding gauged pixel in the same Thiessen polygon, and the second term is the rainfall (after benchmark correction) difference between the current pixel and the gauged pixel. Our results indicate that the corrected rainfall data outperforms the original TRMM product in the simulations of moderate and low flows and outperforms the sparse raingauges in the simulations of both peak and low flows.

EDITOR A. Castellarin; ASSOCIATE EDITOR S. Huang     

气汞的第一个同震效应记录

利用杭州超距科技有限公司最近研发的ATG-6138型测汞仪在云南省弥勒井气汞（Hg）观测中记录到尼泊尔8.1级地震的同震效应。这是我国气汞观测的第一个同震效应的纪录。这一事实表明了进一步提升地震地下流体化学量观测仪器的观测精度与采样率,有可能记录到固体潮与同震效应等更多的地壳动力作用信息,从而进一步提升其地震前兆监测能力。     

Cyclic behavior and failure mechanism of self‐centering energy dissipation braces with pre‐pressed combination disc springs

A new type of bracing system composed of friction energy dissipation devices for energy dissipation, pre‐pressed combination disc springs for self‐centering and tube members as guiding elements is developed and experimentally studied in this paper. The mechanics of this system are explained, the equations governing its hysteretic responses are outlined and large‐scale validation tests of two braces with different types of disc springs are conducted under the condition of low cyclic reversed loading. The experimental results demonstrate that the proposed bracing system exhibits a stable and repeatable flag‐shaped hysteretic response with an excellent self‐centering capability and effective energy dissipation throughout the loading protocol. Furthermore, the maximum bearing force and stiffness are predicted well by the equations governing its mechanical behavior. Fatigue and destructive test results demonstrate that the proposed bracing system can maintain stable energy dissipation and self‐centering capabilities under large deformation cyclic loading even when the tube members exceed the elastic limit and that a larger bearing capacity is achieved by the system that has disc springs without a bearing surface. Copyright © 2016 John Wiley & Sons, Ltd.     

模拟退火方法在三维速度模型地震波走时反演中的应用

采用块状建模以及三角形拼接的界面描述方式,并通过立方体速度网格线性插值获得块体内部的速度分布。正演过程中采用逐段迭代射线追踪方法计算三维复杂地质模型中的射线走时,并采用模拟退火方法进行了三维模型中的地震波走时反演研究。模型测试结果表明,使用的射线追踪和走时反演算法有效。