The 1 Mpc giant head-tail radio galaxy IC 711: 3-dimensional simulation and additional constraints on the ram pressure theory

Recent observations of the longest known head-tail galaxy IC 711, at long wavelengths have shown it to extend farther than previously known. At δ 74 cm, Vallée and Roger (1987) found it to stretch 17′ (930 kpc) behind the optical nucleus of this elliptical galaxy. At δ92 cm, Vallée and Strom (1988) found it to stretch 18.3′ (1 Mpc) behind the optical nucleus. What new physics can be learned from it? To that end, a theoretical simulation in 3 dimensions of the longest head-tail galaxy has been performed, building the radio trail cell by cell inside a volume of space composed of 8 million cells, with each cell being assigned a proper radio emissivity. Matching ram pressure theory and recent observations yields a primary fast decrease of the radio luminosity with time or distance from the optical nucleus of the galaxy, and a secondary periodic variation of the radio luminosity every 500 kpc. Near the end of the tail, a sudden and unpredicted flare-up of the observed width of the tail requires a sudden change in the jet's physical conditions about 2 Gyr earlier, or that of the surroundings. These simulations provide some additional constraints on the ram pressure theory. Along the tail ridge, particle aging and particle acceleration must combine to give a luminosity function that mimics an exponential decrease with time. Across the tail ridge, no edge brightening is necessary, suggesting that particle aging and particle acceleration must combine via central turbulences and central instabilities (not by edge effects). The disappearance of the radio trail at two points along the radio ridge is unexpected from the ram pressure theory. Thus particle aging and particle acceleration must combine once more to mimic a sinusoidal modulation with time of the radio luminosity, perhaps near the nucleus inside the optical galaxy.     

Interannual variability in the biochemical composition of newly hatched larvae of the spider crab Maja brachydactyla (Decapoda,Majidae)

The spider crab Maja brachydactyla is an important commercial species in Europe and supports intensive fisheries in the NE Atlantic. A field survey was performed to assess long‐term and consecutive interannual (2005–2010) variation of the biochemical composition of newly hatched larvae of M. brachydactyla. Larval biochemical profiles differed significantly among years, with pronounced differences being recorded in 2010. Differences among batches of newly hatched larvae were mainly explained by the contribution of triacylglycerols and, to a lesser degree, by protein and lipid content. The use of different nutrition indices is discussed. The biochemical composition of newly hatched larvae from M. brachydactyla was highly variable, even though surveyed broodstock was obtained from the same local population and was always sampled during the same season. The unpredictable biochemical profiles of newly hatched larvae may condition their survival and recruitment. This largely overlooked aspect of larval variability should be considered in future fisheries management strategies and captive production of marine organisms that still rely on wild seeds.     

Study of the air-sea interactions at the mesoscale: the SEMAPHORE experiment

The SEMAPHORE (Structure des Echanges Mer-Atmosphère, Propriétés des Hétérogénéités Océaniques: Recherche Expérimentale) experiment has been conducted from June to November 1993 in the Northeast Atlantic between the Azores and Madeira. It was centered on the study of the mesoscale ocean circulation and air-sea interactions. The experimental investigation was achieved at the mesoscale using moorings, floats, and ship hydrological survey, and at a smaller scale by one dedicated ship, two instrumented aircraft, and surface drifting buoys, for one and a half month in October-November (IOP: intense observing period). Observations from meteorological operational satellites as well as spaceborne microwave sensors were used in complement. The main studies undertaken concern the mesoscale ocean, the upper ocean, the atmospheric boundary layer, and the sea surface, and first results are presented for the various topics. From data analysis and model simulations, the main characteristics of the ocean circulation were deduced, showing the close relationship between the Azores front meander and the occurrence of Mediterranean water lenses (meddies), and the shift between the Azores current frontal signature at the surface and within the thermocline. Using drifting buoys and ship data in the upper ocean, the gap between the scales of the atmospheric forcing and the oceanic variability was made evident. A 2 °C decrease and a 40-m deepening of the mixed layer were measured within the IOP, associated with a heating loss of about 100 W m⁻². This evolution was shown to be strongly connected to the occurrence of storms at the beginning and the end of October. Above the surface, turbulent measurements from ship and aircraft were analyzed across the surface thermal front, showing a 30% difference in heat fluxes between both sides during a 4-day period, and the respective contributions of the wind and the surface temperature were evaluated. The classical momentum flux bulk parameterization was found to fail in low wind and unstable conditions. Finally, the sea surface was investigated using airborne and satellite radars and wave buoys. A wave model, operationally used, was found to get better results compared with radar and wave-buoy measurements, when initialized using an improved wind field, obtained by assimilating satellite and buoy wind data in a meteorological model. A detailed analysis of a 2-day period showed that the swell component, propagating from a far source area, is underestimated in the wave model. A data base has been created, containing all experimental measurements. It will allow us to pursue the interpretation of observations and to test model simulations in the ocean, at the surface and in the atmospheric boundary layer, and to investigate the ocean-atmosphere coupling at the local and mesoscales.     

From outwash to coastal systems in the Portneuf–Forestville deltaic complex (Québec North Shore): Anatomy of a forced regressive deglacial sequence

Deglacial sequences typically include backstepping grounding zone wedges and prevailing glaciomarine depositional facies. However, in coastal domains, deglacial sequences are dominated by depositional systems ranging from turbiditic to fluvial facies. Such deglacial sequences are strongly impacted by glacio‐isostatic rebound, the rate and amplitude of which commonly outpaces those of post‐glacial eustatic sea‐level rise. This results in a sustained relative sea‐level fall covering the entire depositional time interval. This paper examines a Late Quaternary, forced regressive, deglacial sequence located on the North Shore of the St. Lawrence Estuary (Portneuf Peninsula, Québec, Canada) and aims to decipher the main controls that governed its stratigraphic architecture. The forced regressive deglacial sequence forms a thick (>100 m) and extensive (>100 km²) multiphased deltaic complex emplaced after the retreat of the Laurentide Ice Sheet margin from the study area ca 12 500 years ago. The sedimentary succession is composed of ice‐contact, glaciomarine, turbiditic, deltaic, fluvial and coastal depositional units. A four‐stage development is recognized: (i) an early ice‐contact stage (esker, glaciomarine mud and outwash fan); (ii) an in‐valley progradational stage (fjord head or moraine‐dammed lacustrine deltas) fed by glacigenics; (iii) an open‐coast deltaic progradation, when proglacial depositional systems expanded beyond the valley outlets and merged together; and (iv) a final stage of river entrenchment and shallow marine reworking that affected the previously emplaced deltaic complex. Most of the sedimentary volume (10 to 15 km³) was emplaced during the three‐first stages over a ca 2 kyr interval. In spite of sustained high rates of relative sea‐level fall (50 to 30 mm·year^?1), delta plain accretion occurred up to the end of the proglacial open‐coast progradational stage. River entrenchment only occurred later, after a significant decrease in the relative sea‐level fall rates (<30 mm·year^?1), and was concurrent with the formation and preservation of extensive coastal deposits (raised beaches, spit platform and barrier sands). The turnaround from delta plain accretion to river entrenchment and coastal erosion is interpreted to be a consequence of the retreat of the ice margin from the river drainage basins that led to the drastic drop of sediment supply and the abrupt decrease in progradation rates. The main internal stratigraphic discontinuity within the forced regressive deglacial sequence does not reflect changes in relative sea‐level variations.     

Geological,geophysical and geochemical structure of a fault zone developed in granitic rocks: Implications for fault zone modeling in 3-D

The structure of a fault zone developed in granitic rocks can be established on the basis of the spatial variability of geological, geophysical and geochemical parameters. In the North Fault of the Mina Ratones area (SW Iberian Massif, Spain), fault rocks along two studied traverses (SR-2 and SR-3 boreholes) exhibit systematic changes in mineralogy, geochemistry, fabrics and microstructures that are related to brittle deformation and alteration of granite to form cataclasite and subsequent gouge. The spatial distribution and intensity of these changes suggest a North Fault morphology that is consistent with the fault-core/damage-zone model proposed by Chester et al. (1993) to describe a fault zone architecture. North Fault damage zone thickness can be defined by the development of mechanically related mesoscopic faults and joints, that produce a Fracture Index (FI)>10. High FI values are spatially correlated with relative low seismic velocity zones (V_P<5 km/s and V_S<2.5 km/s in the well-logs), more probably related to a high concentration of fractures and geochemical alteration produced by meteoric water-granite interaction along fault surfaces. This correlation is the base of a geostatistical model proposed in the final part of this study to image the fault zone architecture of a granitic massif.     

Sites occupancy of Fe3+ in Garfield Nontronite: A spectroscopic study

New data on the structure of Garfield nontronite have been produced by the use of different spectroscopic techniques: Mössbauer spectroscopy, optical spectroscopy, X-ray absorption edges and EXAFS and NMR. The tetrahedral iron content is found to be no higher than 1 percent. All iron atoms belong to the octahedral sheet excluding the possibility of the presence of non crystallized phases. Some ambiguities remain about the coherence of the octahedral sheet because of the presence of two doublets in the Mössbauer spectrum and at least two lineshapes in NMR spectra of OH which correspond to different environments.     

SEM-EDX Characterisation of Tropospheric Aerosols in the Negev Desert (Israel)

Individual aerosol particles collected in the Negev desert in Israel during a summer and winter campaign in 1996–1997 were analysed by scanning electron microscopy with energy-dispersive X-ray analysis. Hierarchical cluster analysis was performed to interpret the data on the basis of particle diameter and composition. Eleven particle classes (groups) provided clues on sources and/or particle formation. The summer samples were enriched in sulphates and mineral dusts; the winter samples contained more sea salts, aged sea salts, and industrial particles. The fine size fraction below 1 m diameter was enriched in secondary particles and showed evidence of atmospheric processing. The secondary sulphate particles were mainly attributed to long-range transport. A regional conversion from calcite to calcium sulphate occurred during summer. Industrial particles originating from local pollution appeared during winter.     

Isotropic and anisotropic pointing models

This paper describes an alternative approach for generating pointing models for telescopes equipped with serial kinematics, esp. equatorial or alt-az mounts. Our model construction does not exploit any assumption for the underlying physical constraints of the mount, however, one can assign various effects to the respective components of the equations. In order to recover the pointing model parameters, classical linear least squares fitting procedures can be applied. This parameterization also lacks any kind of parametric singularity. We demonstrate the efficiency of this type of model on real measurements with meter-class telescopes where the results provide a root mean square accuracy of 1.5?2 arcseconds.