Evolution of sea‐surface conditions on the northwestern Greenland margin during the Holocene

Reconstructions of sea‐surface conditions during the Holocene were achieved on two sediment cores from the northwest Greenland margin (AMD14‐204) and Kane Basin (AMD14‐Kane2B) based on dinoflagellate cyst assemblages. On the northwest Greenland margin, sea‐surface conditions were cold with an extended sea ice cover prior to 7750 cal a bp associated with the end of the deglaciation. A major change occurred around ca. 7750 cal a bp with enhanced influence of warmer water from the West Greenland Current, and optimal sea‐surface conditions were observed around 6000 cal a bp . After 3350 cal a bp , results reflect the establishment of the modern assemblages. In the Kane Basin, sea‐surface conditions were not favourable for dinocyst productivity prior to 7880 cal a bp , as the basin was still largely covered by ice. The presence of warmer water is recorded between 7880 and 7200 cal a bp and the highest primary productivity between 5200 and 2100 cal a bp , but sea‐surface conditions remained cold with an extended sea ice cover throughout the Holocene. Overall, the results from this study revealed the strong influence of meltwater discharges and oceanic current variability on the sea‐surface conditions. Copyright © 2019 John Wiley & Sons, Ltd.     

Holocene chronostratigraphy of northeastern Baffin Bay based on radiocarbon and palaeomagnetic data

The northeastern Baffin Bay continental margin, which experiences high sediment accumulation rates, is an excellent location to study Holocene sedimentary variations. However, it is often difficult to obtain reliable chronologies of the sediment archives using traditional methods (δ¹⁸O and radiocarbon) due to specific oceanographic conditions (e.g. corrosive bottom waters). Here we propose a chronostratigraphy of three cores collected on the northwestern Greenland margin (AMD14‐204, AMD14‐210 and AMD14‐Kane2B) based on a combination of radiocarbon dating and palaeomagnetic records. Geophysical properties of discrete samples were used to verify the reliability of the palaeomagnetic records. Palaeomagnetic analyses indicate a strong and stable natural remanent magnetization carried by low coercivity ferrimagnetic minerals (magnetite) in the pseudo‐single domain grain size range. Correlation of the full palaeomagnetic vector (inclination, declination, and relative palaeointensity) was used to establish a reliable chronostratigraphical framework for two of the cores (AMD14‐204 and AMD14‐210) and to propose an original palaeomagnetic record for the previously ¹⁴C‐dated core AMD14‐Kane2B that covers most of the Holocene. Overall, this new chronostratigraphy allowed improvement of the timing of the main palaeoenvironmental changes that occurred in this area during the Holocene.     

Solid sedimentation rates history of the Southern African continental margins: Implications for the uplift history of the South African Plateau

The Cretaceous and Cenozoic fill of the continental margins of southern Africa (South‐East Atlantic and Agulhas Margins) contains a continuous record of sediment supplied from the South African Plateau (SAP) for the past 134 million years. Estimates of solid sediment volumes deposited offshore were calculated from isopach maps and extrapolated vertical cross‐sections derived from a large amount of industrial geophysical data. Solid phase volumes and accumulation rates were calculated for six epochs: Lower Cretaceous (134–113 Ma), Mid Cretaceous (113–93.5 Ma), Upper Cretaceous (93.5–81 and 81–66 Ma), Palaeogene (66–25 Ma), Neogene (25–0 Ma). Our new compilation demonstrates the existence of two periods of elevated flux. The most important one occurs in the late Cretaceous (93.5–66 Ma) and was synchronous with an acceleration of onshore denudation as shown by thermochronometric data. After a period of extremely low accumulation rate, the second phase of elevated flux started in the Oligocene (~30–25 Ma) until present‐day. From these observations we suggest that the main phase of uplift of the SAP took place during the Upper Cretaceous. Two mechanisms, namely uplift caused by lithospheric delamination or by dynamic topography caused by the continent moving over the African Superplume, are viable explanations for our observations. The more recent and lower amplitude episode of enhanced accumulation rates is likely to correspond to a second period of uplift, potentially associated with the onset of uplift and extension along the East African Rift System.     

Mapping ecosystem services at the regional scale: the validity of an upscaling approach

Mapping ecosystem services (ES) over large scales is important for environmental monitoring but is often prohibitively expensive and difficult. We test a hybrid, low-cost method of mapping ES indicators over large scales in Pará State, Brazil. Four ES indicators (vegetation carbon stocks, biodiversity index, soil chemical quality index and rates of water infiltration into soil) were measured in the field and then summarized spatially for regional land-cover classes derived from satellite imagery. The regionally mapped ES values correlated strongly with independent and local measures of ES. For example, regional estimates of the vegetation carbon stocks are strongly correlated with actual measures derived from field samples and validation data (significant anova test – p-value = 4.51^e?9) and differed on average by only 20 Mg/ha from the field data. Our spatially-nested approach provides reliable and accurate maps of ES at both local and regional scales. Local maps account for the specificities of an area while regional maps provide an accurate generalization of an ES’ state. Such up-scaling methods infuse large-scale ES maps with localized data and enable the estimation of uncertainty of at regional scales. Our approach is first step towards the spatial characterization of ES at large and potentially global scales.     

Analysis of the tropical climate variability in a two-column framework

This work examines the relevance of a classical two-column modeling framework of the tropical climate in terms of observed natural variability. A method is developed to analyze the observed tropical climate in a simple framework that features a moist, ascending column and a dry, subsiding one. This method is used to analyze the natural variability of the tropical climate in the ERA40 reanalysis and in ISCCP satellite data. It appears that the seasonal cycle of the tropic-wide sea surface temperature (SST) is almost linearly linked to the seasonal cycle of the relative area of the moist regions, as predicted by the sensitivity of the two-column models. A more detailed analysis shows that this link is the product of a complex interaction and adjustments between the moist and dry regions. The seasonal cycle of low-cloud cover in the dry regions also appears to interact with the SST seasonal cycle: the low-cloud cover influences the tropic-wide SST via its direct radiative forcing on the local SST and it appears to be controlled by the SST difference between moist and dry regions. By contrast, the SST interannual variability appears to be driven by the El Ni?o Southern Oscillation (ENSO), with no significant impact from the changes in the relative area of the moist regions or in the low-cloud cover in the dry regions independently of the ENSO. ENSO-related changes in the area of moist regions and low-cloud cover constitute negative feedbacks on the ENSO-related SST variability.     

GRACE-derived surface water mass anomalies by energy integral approach: application to continental hydrology

We propose an unconstrained approach to recover regional time-variations of surface mass anomalies using Level-1 Gravity Recovery and Climate Experiment (GRACE) orbit observations, for reaching spatial resolutions of a few hundreds of kilometers. Potential differences between the twin GRACE vehicles are determined along short satellite tracks using the energy integral method (i.e., integration of orbit parameters vs. time) in a quasi-inertial terrestrial reference frame. Potential differences residuals corresponding mainly to changes in continental hydrology are then obtained after removing the gravitational effects of the known geophysical phenomena that are mainly the static part of the Earth’s gravity field and time-varying contributions to gravity (Sun, Moon, planets, atmosphere, ocean, tides, variations of Earth’s rotation axis) through ad hoc models. Regional surface mass anomalies are restored from potential difference anomalies of 10 to 30-day orbits onto 1^◦ continental grids by regularization techniques based on singular value decomposition. Error budget analysis has been made by considering the important effects of spectrum truncation, the time length of observation (or spatial coverage of the data to invert) and for different levels of noise.     

Thermal‐infrared remote sensing of surface water–groundwater exchanges in a restored anastomosing channel (Upper Rhine River,France)

Ecohydrological processes are a key element to consider in functional river restorations. In the framework of a LIFE+ European restoration program, we have investigated the potential for airborne thermal‐infrared remote sensing to map surface water–groundwater exchanges and to identify their driving factors. We focused our attention on anastomosing channels on an artificial island of the Upper Rhine River (Rohrschollen), where a new channel was excavated from the floodplain to reconnect an older channel in its upstream part. These hydraulic engineering works led to an increased inflow from the Rhine Canal. Here, we propose an original data treatment chain to (a) georeference the thermal‐infrared images in geographic information system based on visible images, (b) detect and correct data errors, and (c) identify and locate thermal anomalies attributed to groundwater inputs and hyporheic upwellings. Our results, which have been compared to morpho‐sedimentary data, show that groundwater upwelling in the new channel is controlled by riffle–pool sequences and bars. This channel is characterized by large bedload transport and morphodynamic activity, forming riffles and bars. In the old channel, where riffle–pool sequences no longer exist, due to impacts of engineering works and insufficient morphodynamic effects of the restoration, thermal anomalies appeared to be less pronounced. Groundwater inputs seem to be controlled by former gravel bars outcropping on the banks, as well as by local thinning of the low‐permeability clogging layer on the channel bed.     

Two successive phases of ultrahigh temperature metamorphism in Rogaland,S. Norway: Evidence from Y‐in‐monazite thermometry

In Rogaland, South Norway, a polycyclic granulite facies metamorphic domain surrounds the late‐Sveconorwegian anorthosite–mangerite–charnockite (AMC) plutonic complex. Integrated petrology, phase equilibria modelling, monazite microchemistry, Y‐in‐monazite thermometry, and monazite U–Th–Pb geochronology in eight samples, distributed across the apparent metamorphic field gradient, imply a sequence of two successive phases of ultrahigh temperature (UHT) metamorphism in the time window between 1,050 and 910 Ma. A first long‐lived metamorphic cycle (M1) between 1,045 ± 8 and 992 ± 11 Ma is recorded by monazite in all samples. This cycle is interpreted to represent prograde clockwise P–T path involving melt production in fertile protoliths and culminating in UHT conditions of ~6 kbar and 920°C. Y‐in‐monazite thermometry, in a residual garnet‐absent sapphirine–orthopyroxene granulite, provides critical evidence for average temperature of 931 and 917°C between 1,029 ± 9 and 1,006 ± 8 Ma. Metamorphism peaked after c. 20 Ma of crustal melting and melt extraction, probably supported by a protracted asthenospheric heat source following lithospheric mantle delamination. Between 990 and 940 Ma, slow conductive cooling to 750–800°C is characterized by monazite reactivity as opposed to silicate metastability. A second incursion (M2) to UHT conditions of ~3.5–5 kbar and 900–950°C, is recorded by Y‐rich monazite at 930 ± 6 Ma in an orthopyroxene–cordierite–hercynite gneiss and by an osumilite gneiss. This M2 metamorphism, typified by osumilite paragenesis, is related to the intrusion of the AMC plutonic complex at 931 ± 2 Ma. Thermal preconditioning of the crust during the first UHT metamorphism may explain the width of the aureole of contact metamorphism c. 75 Ma later, and also the rarity of osumilite‐bearing assemblages in general.     

Contribution of long-term hydrothermal experiments for understanding the smectite-to-chlorite conversion in geological environments

The smectite-to-chlorite conversion is investigated through long-duration experiments (up to 9 years) conducted at 300 °C. The starting products were the Wyoming bentonite MX80 (79 % smectite), metallic iron and magnetite in contact with a Na–Ca chloride solution. The predominant minerals in the run products were an iron-rich chlorite (chamosite like) and interstratified clays interpreted to be chlorite/smectite and/or corrensite/smectite, accompanied by euhedral crystals of quartz, albite and zeolite. The formation of pure corrensite was not observed in the long-duration experiments. The conversion of smectite into chlorite over time appears to take place in several steps and through several successive mechanisms: a solid-state transformation, significant dissolution of the smectite and direct precipitation from the solution, which is over-saturated with respect to chlorite, allowing the formation of a chamosite-like mineral. The reaction mechanisms are confirmed by X-ray patterns and data obtained on the experimental solutions (pH, contents of Si, Mg, Na and Ca). Because of the availability of some nutrients in the solution, total dissolution of the starting smectite does not lead to 100 % crystallization of chlorite but to a mixture of two dominant clays: chamosite and interstratified chlorite/smectite and/or corrensite/smectite poor in smectite. The role of Fe/(Fe + Mg) in the experimental medium is highlighted by chemical data obtained on newly formed clay particles alongside previously published data. The newly formed iron-rich chlorite has the same composition as that predicted by the geothermometer for diagenetic to low-grade metamorphic conditions, and the quartz + Fe-chlorite + albite experimental assemblage in the 9-year experiment is close to that fixed by water–rock equilibrium.