On the turbulent Prandtl number in the stable atmospheric boundary layer

This study focuses on the behaviour of the turbulent Prandtl number, Pr _t , in the stable atmospheric boundary layer (SBL) based on measurements made during the Surface Heat Budget of the Arctic Ocean experiment (SHEBA). It is found that Pr _t increases with increasing stability if Pr _t is plotted vs. gradient Richardson number, Ri; but at the same time, Pr _t decreases with increasing stability if Pr _t is plotted vs. flux Richardson number, Rf, or vs. ζ = z/L. This paradoxical behaviour of the turbulent Prandtl number in the SBL derives from the fact that plots of Pr _t vs. Ri (as well as vs. Rf and ζ) for individual 1-h observations and conventional bin-averaged values of the individual quantities have built-in correlation (or self-correlation) because of the shared variables. For independent estimates of how Pr _t behaves in very stable stratification, Pr _t is plotted against the bulk Richardson number; such plots have no built-in correlation. These plots based on the SHEBA data show that, on the average, Pr _t decreases with increasing stability and Pr _t < 1 in the very stable case. For specific heights and stabilities, though, the turbulent Prandtl number has more complicated behaviour in the SBL.     

Stresses along the metastable wedge of olivine in a subducting slab: possible explanation for the Tonga double seismic layer

A numerical calculation of the stresses associated with changes in volume during phase transitions of olivine in a descending slab results in a double layer of high shear stress along the metastable olivine wedge in the depth range 350-460 km. Stress in the upper layer is in-plane tensional and stress in the lower layer is down-dip compressional. The modeled stress field agrees with observations of stress in the Tonga double seismic zone. High shear stress also exists in the slab at depths below the metastable wedge. This stress distribution involves down-dip compression and trench-parallel tension, which agrees with about half of the focal mechanisms in the Tonga slab at depths of 460-690 km. The model supports the idea that at least two possible stress release mechanisms for deep earthquakes may act in the Tonga subducting slab. One, transformational faulting, is restricted to the metastable wedge while the other one acts below the metastable wedge.     

Compositional and temporal investigation of exposed lunar basalts in the Mare Imbrium region

This paper presents an updated stratigraphical and compositional study of the exposed maria within the Imbrium basin on the Moon. Clementine multispectral data were employed to derive TiO₂ and FeO wt% abundance estimates of potentially distinct basaltic flows. Additionally, NASA Lunar Orbiter images were used to estimate flow ages using crater count statistics. Mare Imbrium shows evidence of a complex suite of low to high-Ti basaltic lava units infilling the basin over an 800 million year timescale. More than a third (37%) of identified mare basalts were found to contain 1-3 wt% TiO₂. Two other major mare lithological units (representing about 25% of the surface each) show TiO₂ values between 3-5 and 7-9 wt%. The dominant fraction (55%) of the sampled maria contain FeO between 16 and 18 wt%, followed by 27% of maria having 18-20 wt% and the remaining 18%, 14-16 wt% FeO. A crater frequency count (for diameters >500 m) shows that in three quarters of the sampled mare crater counts range between 3.5 and 5.5×¹⁰⁻² per km², which translates, according to a lunar cratering model chronology, into estimated emplacement ages between ∼3.3 and 2.5 Ga. A compositional convergence trend between the variations of iron and titanium oxides was identified, in particular for materials with TiO₂ and FeO content broadly above 5 and 17 wt%, respectively, suggesting a related petrogenesis and evolution. According to these findings, three major periods of mare infill are exposed in the Imbrium basin; despite each period showing a range of basaltic compositions (classified according to their TiO₂ content), it is apparent that, at least within these local geological settings, the igneous petrogenesis generally evolved through time towards more TiO₂- and FeO-rich melts.     

A Practical Approach for Collecting Large‐n Detrital Zircon U‐Pb Data sets by Quadrupole LA‐ICP‐MS

A measurement procedure for the rapid acquisition of U‐Pb dates for detrital zircons by quadrupole LA‐ICP‐MS was developed. The procedure achieves a threefold increase in measurement efficiency compared with the most commonly used methods. Utilising reduced background counting times and a shortened ablation period, a throughput of ~ 130 measurements/h can be achieved. The measurement procedure was characterised and validated using data from thirty‐nine sessions acquired over a twelve‐month period. Systematic measurement error in ²⁰⁶Pb/²³⁸U dates for reference materials used for quality control with ages between 28.2 and 2672 Ma was < 1.5%. Average measurement uncertainty, including both random and systematic components, was 1–4% (2s). Interrogation of time‐resolved calculated dates and signal intensities for each measurement allows for the detection and elimination of portions of measurements exhibiting age heterogeneities, zoning, lead loss and contamination by common lead. The measurement procedure diminishes the need to acquire cathodoluminescence imagery for routine detrital zircon applications further increasing throughput and reducing cost. The utility of the measurement procedure is demonstrated by the measurement of samples previously characterised by LA‐MC‐ICP‐MS.     

Origin of the Olympus Mons aureole and perimeter scarp

The aureole materials that form an annulus of corrugated terrain surrounding Olympus Mons are considered to be the product of mass movement. The scarp at the mountain's foot formed as a result of this massive removal of material from the volcano's outer flanks. This interpretation is supported by a comparison of the amount of material originally available before scarp formation, and the present volume of aureole materials. On the basis of distribution, surface textures and theoretical considerations it is considered that the aureole was produced by a series of megaslides, rather than by a flow mechanism. Production of the megaslides may have been assisted by a period of widespread melting of permafrost.Paper presented at the European Workshop on Planetary Sciences, organised by the Laboratorio di Astrofisica Spaziale di Frascati, and held between April 23–27, 1979, at the Accademia Nazionale del Lincei in Rome, Italy.