英峰岭红土-火山岩序列古地磁年代初步结果

夏商周断代工程的总目标是制订有科学依据的年表。研究途径主要有两条：1）根据古代天象记录，通过现代天文计算推定其年代；2）根据考古提供的系列样品作^14c年龄测定，转换成误差较小的、有考古内涵的历法年。天文推算可以得出年龄定点，^14C测年可以覆盖全面，建立起夏商周的年龄框架。两者结果互证，再同历史文献、考古研究等多学科综合研究，制订出夏商周三代年表。同过去相比，这应当是最有科学依据的。     

Metallogeny of Shoshonite-Hosted Copper-Gold Deposits in Middle-South Parts of Tancheng-Lujiang Deep Fault Zone and Its Vicinity,Eastern China

ＩＮＴＲＯＤＵＣＴＩＯＮＳｈｏｓｈｏｎｉｔｅｓａｒｅｐｏｔａｓｓｉｃｉｇｎｅｏｕｓｒｏｃｋｓｗｈｉｃｈｏｃｃｕｒｍａｉｎ－ｌｙｉｎｓｕｂｄｕｃｔｉｏｎ－ｒｅｌａｔｅｄｔｅｃｔｏｎｉｃｓｅｔｔｉｎｇｓ（Ｍｏｒｒｉｓｏｎ,１９８０）．Ｔｈｅｙａｒｅｃｏｍ...     

670矿床火山围岩铀赋存状态及配分研究

670矿床是中国东南部中生代火山岩带内典型的火山岩型铀钼矿床;矿床具有叠加成矿特点.本文利用诱发裂变径迹的方法研究了矿床火山围岩中铀的赋存状态及配分.结果表明火山围岩中的铀主要有三种赋存状态:(一)分布在火山基质及晶屑内均匀分散的质点铀,其裂变径迹是弥散状或弧立星射状分布;(二)吸附在蚀变矿物表面、矿物隙间及微裂隙内的聚合态铀,其裂变径迹为密集带状及团块状;(三)分布在副矿物中或呈铀矿物存在的铀,其裂变径迹为聚合星射状及团块状.矿物的蚀变过程,如绿泥石化、碳酸盐化等可改变火山围岩铀的赋存状态,造成铀在岩石中的活化和预富集,从而有利于矿化.因此火山围岩中铀的含量虽然较低,但对火山岩型铀矿的形成仍有重要意义.     

基于SPCA和AHP联合方法的滦河流域生态环境脆弱性变化规律分析

基于生态敏感性-生态恢复力-生态压力度概念模型评价体系,选取表征地形、地表、气象、土壤、植被及社会经济因子的15项多系统评价指标,应用空间主成分分析（SPCA）与层次分析（AHP）联合方法,对滦河流域1985年、1995年和2005年3期生态环境进行脆弱性评价,并进行量化分级,获得流域生态环境脆弱性变化规律和成因机制。结果表明：流域整体脆弱性等级有减小趋势,潜在脆弱区域面积逐渐增大,而重度脆弱区域明显减小;西北山地和冀东沿海地区变化较为剧烈;人类活动已经取代自然条件,成为影响滦河流域生态系统的关键因子;流域人口的快速增长、气候条件的改变以及土地资源的不合理利用是区域脆弱性变化的主要驱动力。     

某些硫化物矿物中Fe的价态电子探针分析

对湖南上堡、郴县及胶东地区5个黄铁矿样品和5个黄铜矿样品进行的穆斯堡尔谱及电子探针(波谱仪)的分析得出:含Fe~(2+)的黄铁矿中Fe的纯离子浓度I_(La)/I_(Ka)值为0.65±0.05,含Fe~(3+)的黄铜矿中Fe的纯离子浓度,I_(La)/I_(ka)值为0.40士0.05.可见,随Fe价态的升高,比值I_(La)/I_(ka)反而降低.     

东川汤丹铜矿床石英真空击碎及其粉末阶段加热^40Ar—^39Ar年龄谱的含义

采用真空击碎技术提取东川汤丹铜矿床石英流体包裹体进行40Ar-39Ar法年龄测定,获得了逐渐下降的阶梯形年龄谱,表明流体包裹体含有过剩氩;数据点在40Ar／36Ar-39Ar／36Ar图解上构成等时线,等时线年龄为（712±33）Ma,代表了矿床的形成年龄。随后对其粉末进行40Ar-39Ar阶段加热（100—800℃）分析,形成相对比较平坦的年龄谱,坪年龄为（317±6）Ma（39Ar占45％,含真空击碎分析在内）,粉末加热分析全部数据点构成的等时线年龄为（321±13）Ma。电子探针分析和显微镜观察证实了该石英样品中含有粒径大于100μm,K2O含量为8％-10％,形成时间明显晚于石英的白云母类富钾矿物,粉末阶段加热分析结果表明～320Ma应为后期白云母类矿物的年龄。     

Thermal and rheological structures of the Xisha Trough, South China Sea

The Xisha Trough, located in the northwest of the South China Sea (SCS) mainly rifted 30 Ma ago, has been a failed rift since the cessation of the seafloor spreading of the NW subbasin. Based on the velocity–depth model along Profile OBH-4 across the Xisha Trough, a seven-layer density–depth model is used to estimate density structure for the profile. The relationship between seismic velocity and radiogenic heat production is used to estimate the vertical distribution of heat sources in the lower crust. The 2-D temperature field is calculated by applying a 2-D numerical solution of the heat conduction equation and the thermal lithosphere thickness is obtained from the basalt dry solidus (BDS). The rheology of the profile is estimated on the basis of frictional failure in the brittle regime and power-law steady-state creep in the ductile regime. Rheological model is constructed for a three-layer model involving a granitic upper crust, a quartz diorite lower crust and an olivine upper mantle. Gravity modeling supports basically the velocity–depth model. The Moho along Profile OBH-4 is of relatively high heat flow ranging from 46 to 60 mW/m² and the Moho heat flow is higher in the trough than on the flanks. The depth of the “thermal” lithospheric lower boundary is about 54 km in the center, deepens toward two sides, and is about 75 km at the northern slope area and about 70 km at the southern Xisha–Zhongsha Block. Rheological calculation indicates that the two thinnest ductile layers in the crust and the thickest brittle layer in the uppermost mantle lie in the central region, showing that the Xisha Trough has been rheologically strengthened, which are mainly due to later thermal relaxation. In addition, the strengthening in rheology during rifting was not the main factor in hampering the breakup of the Xisha Trough.     

利用地质成果优化3010皮带上山设计

3010皮带上 山 建成 后将 担 负着 范各 庄 矿三 水平 、四 水平 的 煤炭 运输 任 务,服务 年 限要 求 至 少 30a。 此 皮 带上山 位于 岩 溶陷 落柱 较 发育 的井 口 区域 ,范 各庄 矿 发现 的 12个 陷落 柱 全部 位于 此 区域 。由 于 陷落 柱直 接 导通 下部 奥 灰水 ,一 旦揭 露 将有 淹没 整 个矿 井的 危 险。为 保 证矿 井安 全 ,在 工程 施工 前 ,利用 地 质手 段对 设 计区 域进 行 了探 查,发现皮 带上 山 的中 上部 发 育有 岩溶 陷 落柱 ,两 次对 设 计进 行了 修 改,为 施 工提 供了 安 全保 障。     

Determination of Trace Silver in Polymetallic Ore Samples by Flame Atomic Absorption Spectrometry after Solid‐Phase Extraction Using a Microcolumn Comprising Eggshell Membrane

A rapid and inexpensive method was developed for the determination of trace silver in polymetallic ore samples by use of eggshell membrane (ESM), a natural biomaterial, as the solid‐phase extraction (SPE) adsorbent coupled with flame atomic absorption spectrometry (FAAS). The ESM was used for the separation/pre‐concentration of silver, and the parameters affecting sensitivity, such as pH, sample flow rate, eluent volume and eluent flow rate, were carefully investigated. ESM was found to be an effective solid phase extractant for the adsorption of trace silver over a wide range of acidity from 0.02 to 0.50 mol l^?1 HNO₃. The sample solution in 0.4 mol l^?1 HNO₃ was pumped through an ESM microcolumn at the rate of 1.0 ml min^?1. Silver was absorbed, and then eluted with a solution of 1.0% m/v thiourea–0.5% v/v HCl. Under these optimal conditions, ESM exhibited a good enrichment efficiency for silver with a dynamic adsorption capacity of 1.7 mg g^?1. The proposed method was applied to the FAAS determination of trace silver in polymetallic ores and geological reference materials, GSO‐2, 3 and 5, and GSD‐11, GSD‐12, and the determined values were in good agreement with certified values.     

Intrusion and its implication for subsidence: A case from the Baiyun Sag, on the northern margin of the South China Sea

We develop a series of simple numerical models to explain the anomalous subsidence and deposition phenomena on the northern continental margin of the South China Sea, in particular in the Baiyun Sag. The results suggest that a short-period high rate deposition of around 17 Ma is related to a rapid subsidence event, which may be due to episodic emplacement of a dense intrusion. Necking and gravity models indicate that in the basement of the Baiyun Sag, there is a dense zone that is 100–200 kg/m³ more dense than the surrounding country rock. Considering its high magnetic intensity and regional igneous activity, the dense zone is thought to be related to a phase of basalt intrusion that may have taken place around 17 Ma. Thermal and subsidence models indicate that a hot denser intrusion can cause significant subsidence immediately after the intrusion. The subsidence rate then slows down with cooling, thus becoming consistent with the observed subsidence curves at around 17 Ma. The results also indicate that the lithospheric strength under the Baiyun Sag is negligible, and that the high-velocity layer in the lowermost crust may be not an original part of the pre-rift crust. Instead, it is thought to be underplated intrusion emplaced at around 30 Ma when the continental margin broke up.