GPS network monitors the Western Alps' deformation over a five-year period: 1993–1998

  The Western Alps are among the best studied collisional belts with both detailed structural mapping and also crustal geophysical investigations such as the ECORS and EGT seismic profile. By contrast, the present-day kinematics of the belt is still largely unknown due to small relative motions and the insufficient accuracy of the triangulation data. As a consequence, several tectonic problems still remain to be solved, such as the amount of N–S convergence in the Occidental Alps, the repartition of the deformation between the Alpine tectonic units, and the relation between deformation and rotation across the Alpine arc. In order to address these problems, the GPS ALPES group, made up of French, Swiss and Italian research organizations, has achieved the first large-scale GPS surveys of the Western Alps. More than 60 sites were surveyed in 1993 and 1998 with a minimum observation of 3 days at each site. GPS data processing has been done by three independent teams using different software. The different solutions have horizontal repeatabilities (N–E) of 4–7 mm in 1993 and 2–3 mm in 1998 and compare at the 3–5-mm level in position and 2-mm/yr level in velocity. A comparison of 1993 and 1998 coordinates shows that residual velocities of the GPS marks are generally smaller than 2 mm/yr, precluding a detailed tectonic interpretation of the differential motions. However, these data seem to suggest that the N–S compression of the Western Alps is quite mild (less than 2 mm/yr) compared to the global convergence between the African and Eurasian plate (6 mm/yr). This implies that the shortening must be accomodated elsewhere by the deformation of the Maghrebids and/or by rotations of Mediterranean microplates. Also, E–W velocity components analysis supports the idea that E–W extension exists, as already suggested by recent structural and seismotectonic data interpretation. Received: 27 November 2000 / Accepted: 17 September 2001     

LightSquared effects on estimated C/N 0, pseudoranges and positions

We present experimental results showing the impact of the proposed LightSquared (LS) Long-term Evolution (LTE) signals on both GPS and Galileo civil modulations in the L1/E1 band. The experiments were conducted in radiated mode in a large anechoic chamber. Three Galileo enabled receivers were chosen for the tests, and a state of the art GNSS signal generator was used to simulate both GPS and Galileo signals. The LTE signals were generated by an Agilent Programmable Signal Generator with a license to generate the signals according to the 3GPP LTE FDD standard. The interference impact was measured in terms of a Carrier-to-Noise power spectral density ratio (C/N ₀) degradation, in accordance with the methodology which the LS/GPS Technical Working Group (TWG) established by mandate of the FCC. A model for determining the impact of the LS signal on the considered GNSS signals is provided and is validated against experimental data. It is shown that the Galileo E1 Open Service (OS) signal is marginally more susceptible to this form of interference than the GPS L1 C/A signal due to its greater proximity to the lower edge of the L1 band. The impact of LS interference was further analyzed in terms of pseudorange and position errors. Despite its relevance for most GNSS users, this aspect was not considered by the TWG. Measurement and position domain analysis along with the study of the LS impact on the Galileo OS signals are the major contributions. The analysis confirms the results obtained by the TWG and shows that the receiver front-end plays a major role in protecting GNSS signals against RF interference. While it appears that, for now, the LS network will not be deployed, the approach taken and the results obtained herein can be readily adapted for any future terrestrial mobile network that may take the place of LS.     

Use of the L2C signal for inversions of GPS radio occultation data in the neutral atmosphere

Results from processing FORMOSAT-3/COSMIC radio occultations (RO) with the new GPS L2C signal acquired both in phase locked loop (PLL) and open loop (OL) modes are presented. Analysis of L2P, L2C, and L1CA signals acquired in PLL mode shows that in the presence of strong ionospheric scintillation not only L2P tracking, but also L1CA tracking often fails, while L2C tracking is most stable. The use of L2C improves current RO processing in the neutral atmosphere mainly by increasing the number of processed occultations (due to significant reduction in the number of L2 tracking failures) and marginally by a reduction in noise in statistics. The latter is due to the combination of reduced L2C noise (compared to L2P) and increased L1CA noise in those occultations where L2P would have failed. This result suggests application of OL tracking for L1CA and L2C signals throughout an entire occultation to optimally acquire RO data. Two methods of concurrent processing of L1CA and L2C RO signals are considered. Based on testing of individual occultations, these methods allow: (1) reduction in uncertainty of bending angles retrieved by wave optics in the lower troposphere and (2) reduction in small-scale residual errors of the ionospheric correction in the stratosphere.     

ANALYSIS OF THE CHEMICAL POLLUTION OF BUFFER ZONES BY MODELING AND SUB-SATELLITE EXPERIMENTS

Principles are outlined for the use of sub-satellite soil, air, water, and vegetation samples as an auxiliary source of information in remote sensing studies of vegetation stress caused by air pollution. More specifically, procedures for satellite-synchronous aerial overflights, vegetation transects, water quality measurements, and soil tests are described as a basis for delineating boundaries between areas of vegetation stress and unpolluted areas in an industrialized area in the central Urals. Translated from: Kosmicheskiy monitoring biosfery, Yu. A. Izrael', V. V. Bugrovskiy, and Yu. V. Novikov, eds. Leningrad: Gidrometeoizdat, 1985, pp. 93-99.     

PHOTOGRAMMETRIC PRINCIPLES FOR THE COMBINATION OF REMOTE SENSING AND THREE-DIMENSIONAL MAPPING

A review of Soviet research describes methods of combining remote sensing and geodetic data in cartometric data bases—for the purposes of compiling more detailed and accurate “three-dimensional” terrain maps. The major objective is to provide, by means of photogrammetric techniques employing stereopairs or series of overlapping images, elevational data on selective key geomorphological points (along structure lines, summits of ridges, valley bottoms, etc.) which can be used to supplement (or replace) data obtained for the control points of a rectangular grid. Creation of digital models from these “geomorphological” points provides more accurate three-dimensional terrain maps. Translated from: Vestnik Moskovskogo Universiteta, geografiya, 1986, No. 6, pp. 56-64.     

COMPUTATION AND MAPPING OF THE ELEMENTS OF THE WATER-ICE BUDGET OF GLACIERS

Two general approaches for compiling maps of components of the water-ice budget in regions of glacier nourishment are compared and the resulting maps are analyzed. The compilation of raw data is based on field measurements rather than remote sensing information. Translated by Edward Torrey, Alexandria, VA 22308 from: Materialy glyatsiologicheskikh issledovaniy, 1991, No. 72, pp. 94-102.     

Integration of high-resolution imagery and LiDAR data for object-based classification of urban area

This paper investigates the synergistic use of high-resolution multispectral imagery and Light Detection and Ranging (LiDAR) data for object-based classification of urban area. The main contribution of this paper is the development of a semi-automated object-based and rule-based classification method. In the implemented approach, the diverse knowledge about land use/land cover classes are transformed into a set of specialized rules. Further, this paper explores supervised Gaussian Mixture Models for classification, which have been primarily used for unsupervised classification. The work is carried out on test data from two different sites. Contribution of the LiDAR data resulted in a significant improvement of overall Kappa. Accuracy assessment carried out for aforementioned classification methods shows higher overall kappa for both the study sites.     

Seasonal warm-water refuge and sanctuary usage by the Florida manatee (Trichechus manatus latirostris) in Kings Bay,Citrus County,Florida

The largest Florida manatee (Trichechus manatus latirostris) aggregation at a natural warm-water site occurs in Kings Bay, Crystal River, FL. In accordance with the Manatee Recovery Plan, manatee protection areas within Kings Bay have been created by the United States Fish and Wildlife Service (USFWS) and the State of Florida including a year-round refuge designation and seven Federal manatee sanctuaries during the winter manatee season (15 November–31 March). Over the last 30 years, an increase in manatee counts has been observed in Kings Bay which has prompted the need to review existing manatee protection measures. Aerial survey data collected between 1983 and 2012 were used to examine the seasonal change in manatee distribution within Kings Bay to assess the effectiveness of current sanctuary sizes and locations. Regression analysis suggested a significant change in manatee abundance among the winter seasons (p < 0.05). The average winter manatee counts increased by 4.81 animals per year over the 30-year period. Spatially explicit maps using geographic information system (GIS) analysis revealed a strong correlation between high manatee density and artesian springs in Kings Bay during the winter seasons. Highest abundances were identified at three locations: King Spring, Three Sisters Springs, and Magnolia Springs, which coincide with preexisting sanctuary designations. Additional coverage is advocated to support the overflow of manatees outside of sanctuary boundaries. As density patterns were not uniform across summer periods, a consideration of additional boat speed regulations is recommended.     

A Microwave Tomographic Approach for Nondestructive Testing of Dielectric Coated Metallic Surfaces

A microwave imaging method for nondestructive testing of perfectly conducting surfaces beyond a layered media is presented. The method is an adaptation of the surface reconstruction approach by Yapar et al. to the present problem. It is based on the analytical continuation of the measured data to the surface under test through a special representation of the scattered field in terms of Fourier transform and Taylor expansion. Then the problem is reduced to the solution of a nonlinear equation which is solved iteratively via the Newton method and regularization in the least squares sense. Numerical simulations show that defects as small as lambda/500 can be recovered through the presented algorithm.     

Spin rate estimation of sounding rockets using GPS wind-up

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.