Transient electromagnetic responses in seafloor with triaxial anisotropy

Electrical anisotropy of young oceanic crust at mid-ocean ridges is detectable by observation of the rate and geometry of the diffusion of electromagnetic fields. The anisotropy in electrical properties arises from the presence of conductive seawater in an interconnected network of mostly ridge-parallel cracks. In this paper, we first justify the choice of a triaxial model to represent young oceanic crust, with three distinct electrical conductivities in the vertical, strike and spreading directions. We then present an algorithm to calculate the transient electromagnetic responses generated by an electric dipole source over such a triaxially anisotropic seafloor. We show that if the transient passages are measured with three distinct electric dipole-dipole configurations, it is possible to discern all three unknown conductivities independently of each other.     

Fingerprinting the Origin of Fluvial Suspended Sediment in Larger River Basins: Combining Assessment of Spatial Provenance and Source Type

Investigation of the potential for using sediment fingerprinting to integrate both spatial provenance and source type information for larger drainage basins appears to be desirable. This contribution presents the results of adopting a composite fingerprinting procedure incorporating statistically verified multicomponent signatures and a multivariate mixing model to provide a preliminary integration of spatial provenance and source type information for the upper and middle reaches of the drainage basins of the Rivers Exe (601 km²) and Severn (4325 km²), UK. A nested approach is employed, whereby spatial provenance is addressed in terms of the distinct sub-basin zones constituting each study area as an entirety, and source type is then characterised within each of these distinct spatial zones in terms of surface (woodland, pasture, cultivated) and subsurface (channel bank) materials. The results demonstrate that the fingerprinting approach possesses considerable potential for integrating spatial provenance and source type information, and hence for improving the resolution of existing sediment source information for larger drainage basins.     

Ion microprobe analysis of oxygen isotope ratios in quartz from Skye granite: healed micro-cracks,fluid flow,and hydrothermal exchange

 Quartz grains in hydrothermally altered granites from the Isle of Skye are highly heterogeneous and not equilibrated in oxygen isotope ratio at the 20 μm scale. Ion microprobe analysis of one grain shows a gradient of 13‰ over 400 μm and a greater range in δ ¹⁸O than all quartz previously analyzed on the Isle of Skye. Other crystals from the same outcrop are homogeneous. Digitized cathodoluminescence images reveal patterns of magmatic zoning and brittle fracturing not otherwise detectable. The ion probe analysis correlates low δ ¹⁸O values on a micro-scale to one set of healed cracks. Thus, quartz exchanges oxygen isotopes primarily by solution and reprecipitation along fractures, in contrast to more reactive feldspar that appears to exchange from the grain boundary inward. Macroscopic models of isotope exchange are not realistic for these rocks; the flow of hydrothermal fluids was heterogeneous, anisotropic and crack controlled. Received: 23 October 1995/Accepted: 9 April 1996     

Melting of albite and dehydration of brucite in H2O–NaCl fluids to 9 kbars and 700–900°C: implications for partial melting and water activities during high pressure metamorphism

 The melting reaction: albite_(solid)+ H₂O_(fluid) =albite-H₂O_(melt) has been determined in the presence of H₂O–NaCl fluids at 5 and 9.2 kbar, and results compared with those obtained in presence of H₂O–CO₂ fluids. To a good approximation, albite melts congruently at 9 kbar, indicating that the melting temperature at constant pressure is principally determined by water activity. At 5 kbar, the temperature (T)- mole fraction (X _(H2O) ) melting relations in the two systems are almost coincident. By contrast, H₂O–NaCl mixing at 9 kbar is quite non-ideal; albite melts ∼70 ^°C higher in H₂O–NaCl brines than in H₂O–CO₂ fluids for X _(H2O) =0.8 and ∼100 ^°C higher for X _(H2O) =0.5. The melting temperature of albite in H₂O–NaCl fluids of X _(H2O)=0.8 is ∼100 ^°C higher than in pure water. The P–T curves for albite melting at constant H₂O–NaCl show a temperature minimum at about 5 kbar. Water activities in H₂O–NaCl fluids calculated from these results, from new experimental data on the dehydration of brucite in presence of H₂O–NaCl fluid at 9 kbar, and from previously published experimental data, indicate a large decrease with increasing fluid pressure at pressures up to 10 kbar. Aqueous brines with dissolved chloride salt contents comparable to those of real crustal fluids provide a mechanism for reducing water activities, buffering and limiting crustal melting, and generating anhydrous mineral assemblages during deep crustal metamorphism in the granulite facies and in subduction-related metamorphism. Low water activity in high pressure-temperature metamorphic mineral assemblages is not necessarily a criterion of fluid absence or melting, but may be due to the presence of low a _(H2O) brines. Received: 17 March 1995/Accepted: 9 April 1996     

Effects of temperature on strength and compressibility of sand-bentonite buffer

Dense sand-bentonite buffer (γ_d = 1.67Mg/m³) has been proposed in Canada as one of several barriers for isolating nuclear fuel waste. The buffer will be required to function under conditions of high total pressures and elevated temperatures approaching 100°C. Summary results are presented from two test programs: (1) isothermal consolidated undrained triaxial (CIU¯) tests; and (2) isothermal drained constant-p′ (CID) triaxial tests. Specimens were consolidated at effective stresses up to 9.0 MPa and temperatures up to 100°C.

The results indicate parallel hardening lines at systematically lower values of specific volume at elevated temperatures. In shear, increased temperatures produced lower values of maximum deviator stressq_f, and higher pore water pressure changesΔu_f. The net result is curved peak strength envelops in plots ofq_f versusp_f′ that are higher at elevated temperatures, even though the strengths,q_f of individual specimens are lower. The critical state strength envelope is curved inq, p′-planes.

The effect of drained heating on buffer to 100°C is not marked. Compressibilities, stiffnesses, strengths, and pore water pressure generation are all affected, but none of the changes are great.     

An experimental study of phase equilibria in the systems H2O–CO2–CaCl2 and H2O–CO2–NaCl at high pressures and temperatures (500–800?°C, 0.5–0.9?GPa): geological and geophysical applications

Phase equilibria in the ternary systems H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ have been determined from the study of synthetic fluid inclusions in quartz at 500 and 800 °C, 0.5 and 0.9 GPa. The crystallographic control on rates of quartz overgrowth on synthetic quartz crystals was exploited to prevent trapping of fluid inclusions prior to attainment of run conditions. Two types of fluid inclusion were found with different density or CO₂ homogenisation temperature (T_h(CO₂)): a CO₂-rich phase with low T_h(CO₂), and a brine with relatively high T_h(CO₂). The density of CO₂ was calibrated using inclusions in the binary system H₂O–CO₂. Mass balance calculations constrain tie lines and the miscibility gap between brines and CO₂-rich fluids in the H₂O–CO₂–NaCl and H₂O–CO₂–CaCl₂ systems at 500 and 800 °C, and 0.5 and 0.9 GPa. The miscibility gap in the CaCl₂ system is larger than in the NaCl system, and solubilities of CO₂ are smaller. CaCl₂ demonstrates a larger salting-out effect than NaCl at the same P–T conditions. In ternary systems, homogeneous fluids are H₂O-rich and of extremely low salinity, but at medium to high concentrations of salts and non-polar gases fluids are unlikely to be homogeneous. The two-phase state of crustal fluids should be common. For low fluid-rock ratios the cation compositions of crustal fluids are buffered by major crustal minerals: feldspars and micas in pelites and granitic rocks, calcite (dolomite) in carbonates, and pyroxenes and amphiboles in metabasites. Fluids in pelitic and granitic rocks are Na-K rich, while for carbonate and metabasic rocks fluids are Ca-Mg-Fe rich. On lithological boundaries between silicate and carbonate rocks, or between pelites and metabasites, diffusive cation exchange of the salt components of the fluid will cause the surfaces of immiscibility to intersect, leading to unmixing in the fluid phase. Dispersion of acoustic energy at critical conditions of the fluid may amplify seismic reflections that result from different fluid densities on lithological boundaries.Editorial responsibility: I. Parsons     

A method for calculating effective bulk composition modification due to crystal fractionation in garnet-bearing schist: implications for isopleth thermobarometry

Quantitative P–T path determination in metamorphic rocks is commonly based on the variation in composition of growth‐zoned garnet. However, some component of growth zoning in garnet is necessarily the result of an effective bulk composition change within the rock that has been generated by crystal fractionation of components into the core of garnet. Therefore, any quantitative calculation of the P–T regime of garnet growth should be completed using an accurate assessment of the composition of the chemical system from which garnet is growing. Consequently, a method for calculating the extent of crystal fractionation that provides a means of estimating the composition of the unfractionated rock at any stage during garnet growth is developed. The method presented here applies a Rayleigh fractionation model based on measured Mn content of garnet to generate composition v. modal proportion curves for garnet, and uses those curves to estimate the vectors of crystal fractionation. The technique is tested by calculating the precision of the equilibrium between three garnet compositional variables within the chemical system determined to be appropriate for each of a series of microprobe analyses from garnet. Application of the fractionation calculations in conjunction with the P–T estimates based on intersecting compositional isopleths provides a means of calculating P–T conditions of garnet growth that is based on individual point‐analyses on a garnet grain. Such spatially precise and easily obtainable P–T data allow for detailed parallel studies of the microstructural, the P–T, and the chemical evolution of metamorphosed pelites. This method provides a means of studying the dynamics of orogenic systems at a resolution that was previously unattainable.     

Regions and sustainable development: regional planning matters

This paper looks at how the term 'sustainable development' has been used in the process of regional plan making over the past decade. It emphasizes the differing geographies of these debates within England, in terms of how sustainable development has been used to justify different types of approach in different parts of the country. Both drawing on and challenging recent work on state theory, the paper argues the need to see regional planning as a part of a multi-scalar governance system, whose importance should not be underestimated.     

'Just sustainability': the emerging discourse of environmental justice in Britain?

Environmental justice is both a vocabulary for political opportunity, mobilization and action, and a policy principle to guide public decision making. It emerged initially in the US, and more recently in the UK, as a new vocabulary underpinning action by community organizations campaigning against environmental injustices. However, as the environmental justice discourse has matured, it has become increasingly evident that it should play a role in the wider agendas for sustainable development and social inclusion. The links between sustainability and environmental justice are becoming clearer and more widely understood in the UK by NGOs and government alike, and it is the potential synergy between these two discourses which is the focus of this paper. This paper argues that the concept of 'just sustainability' provides a discourse for policymakers and activists, which brings together the key dimensions of both environmental justice and sustainable development.