Paleomagnetic studies of the Late Mesozoic deformation stage in the southern Primorye region

The analysis of paleomagnetic data available for the southern Primiorye region revealed that the studied objects were magnetized under regional remagnetization presumably during the Late Mesozoic folding and this magnetization can be interpreted as being synfolding. The interpretation is based on the parameter that characterizes the folding completion degree immediately before regional remagnetization. It is shown that the relaxation of Late Mesozoic horizontal stresses was irregular. The obtained estimates of the degree of folding completion are consistent with the available geological data and Talitskii’s model for tectonic deformations.     

Automated Kerogen Classification in Microscope Images of Dispersed Kerogen Preparation

We develop the classification part of a system that analyses transmitted light microscope images of dispersed kerogen preparation. The system automatically extracts kerogen pieces from the image and labels each piece as either inertinite or vitrinite. The image pre-processing analysis consists of background removal, identification of kerogen material, object segmentation, object extraction (individual images of pieces of kerogen) and feature calculation for each object. An expert palynologist was asked to label the objects into categories inertinite and vitrinite, which provided the ground truth for the classification experiment. Ten state-of-the-art classifiers and classifier ensembles were compared: Naïve Bayes, decision tree, nearest neighbour, the logistic classifier, multilayered perceptron (MLP), support vector machines (SVM), AdaBoost, Bagging, LogitBoost and Random Forest. The logistic classifier was singled out as the most accurate classifier, with an accuracy greater than 90. Using a 10 times 10-fold cross-validation provided within the Weka software, we found that the logistic classifier was significantly better than five classifiers (p<0.05) and indistinguishable from the other four classifiers. The initial set of 32 features was subsequently reduced to 6 features without compromising the classification accuracy. A further evaluation of the system alerted us to the possible sensitivity of the classification to the ground truth that might vary from one human expert to another. The analysis also revealed that the logistic classifier made most of the correct classifications with a high certainty.     

Influence of initial plastic anisotropy of overconsolidated clays on ground behaviour during tunneling

In order to evaluate the influence of the initial plastic anisotropy in the excavation of a tunnel, a “bubble” bounding surface model for structured soils, formulated by Kavvadas and Belokas (Proc. 10th IACMAG Conf., 2001), was implemented in the explicit finite difference code FLAC. Two different initial stress (K ₀) conditions were considered. The size and shape of the initial bounding surfaces were specified to be consistent with the initial stress field. The distorted and rotated shape of the bounding surface, supported by experimental results, defines the anisotropy of shear strength, which is shown to have a significant influence on the displacements. There is also considerable sensitivity of the soil model to the initial stress field.     

On the use of gravity and magnetic anomalies for locating probable areas of metallic mineralization in South Sinai, Egypt

The present study deals with processing and interpreting the potential gravity and magnetic data in order to locate promising sites for metallic mineral occurrences in the basement rocks of South Sinai. Two promising sites were anticipated by combining the geophysical results and the available geological information. Each site was profiled and interpreted to the nearly approximated subsurface feature model, and the geometrical parameters of the expected subsurface structures may form mineralized bodies such as depth, thickness, width, dipping, density contrast, and magnetic susceptibility contrast could be delineated. Detailed ground Very Low Frequency (VLF) and Vertical Magnetic Gradient (VMG) methods were carried out in the site A2, eight VLF and VMG anomalies were determined, and their depths were calculated.     

LREE distribution in perovskite,apatite and titanite from South West Ugandan xenoliths and kamafugite lavas

Summary In-situ microprobe LREE analyses of perovskite and titanite (La, Ce, Nd), and apatite (La, Ce), from SW Ugandan clinopyroxenite xenoliths and kamafugite lavas indicate that LREE distribution in these minerals is determined by a number of factors related to their different parageneses: In particular LREE content is affected by whether the LREE-bearing minerals have crystallised from metasomatic carbonate or from silicate (i.e. metasomatic or magmatic) melts in the mantle. In this situation LREE partition favours carbonate over silicate melts. Distribution of LREE in perovskite and apatite crystallised from magmatic mantle melts or mantle-derived lavas is chiefly determined by preference of LREE for perovskite > apatite > titanite. LREE zoning in perovskite is influenced by changes in melt structure: increasing melt polymerisation enhancing mineral_LREE/melt_LREE partition into perovskite rims in magmatic xenoliths; decreasing melt polymerisation depleting LREE in lava perovskite rims. This zoning is reinforced by perovskite competition with apatite for LREE: perovskite (cores/rims) co-crystallising with apatite is reduced in LREE. There are 37 instances of perovskitewith Ce below detection while La and Nd levels are normal. These occur in both xenoliths and lavas; in grain zones or whole grains. Likewise Ce alone of the LREE is below detection in six out of ten titanite analyses. These observations are interpreted as evidence for increased f_{O 2}, Ce⁴ + being excluded from these mineral structures. Recognition of these various processes can elucidate the interpretation of bulk rock and bulk mineral LREE signatures in kamafugite volcanism.

---

LREE Verteilung in Perovskit, Apatit und Titanit aus Xenolithen und kamafugitischen Laven Südwest-Ugandas

Zusammenfassung In-situ LREE Analysen von Perovskit und Titanit (La, Ce, Nd) und Apatit (La, Ce) aus Klinopyroxenit-Xenolithen und kamafugitischen Laven Südwest-Ugandas zeigen, daß die LREE Verteilung in diesen Mineralen durch eine Vielzahl von Faktoren, die mit Unterschieden in den Paragenesen zusammenhängen, bestimmt wird: Der LREE-Gehalt wird im besonderen davon bestimmt, ob die LREE-führenden Minerale aus metasomatischen Karbonat- oder aus (metasomatischen oder magmatischen) Silikatschmelzen im Mantel auskristallisierten. Dabei erfolgt die LREE Fraktionierung zu Gunsten der Karbonatschmelzen. Die LREE-Verteilung von Perovskit und Apatit, die aus magmatischen Mantelschmelzen oder -laven kristallisierten, wird vorrangig durch den bevorzugten Einbau der LREE in Perovskit > Apatit > Titanit kontrolliert. Der LREE Zonarbau von Perovskit wird durch die Änderungen der Schmelzstruktur beinflußt: Verstärkte Schmelzpolymerisation führt zu verstärkter Mineral_LFEE/Schmelze_LREE Fraktionierung in den Perovskiträndern magmatischer Xenolithe, eine Abnahme der Schmelzpolymerisation hingegen resultiert in einer Abreicherung der LREE in den Perovskiträndern. Diese Art der Zonierung wird durch den Wettbewerb von Perovskit mit Apatit um die LREE verstärkt. Perovskit (Kerne/Ränder), der mit Apatit gemeinsam auskristallisierte, ist ärmer an LREE. 37 Fälle, in denenCe nicht nachweisbar war, La und Nd aber in normaler Konzentration auftreten, wurden sowohl in den Xenolithen als auch in den Laven gefunden; und zwar entweder in Kornbereichen oder in ganzen Körnern. Vergleichsweise liegt Ce nur in sechs von zehn Titanitproben unterhalb der Nachweisgrenze. Diese Beobachtungen werden als Hinweise auf erhöhte SauerstoffFugazitäten, bei denen Ce^4– aus der Mineralstruktur ausgeschlossen wird, angesehen.Ein Verständnis dieser verschiedenen Prozesse kann zur besseren Interpretation von LREE Gesamtgesteins- und Gesamtmineral-Signaturen in Kamafugiten beitragen.

---

---

With 3 Figures     

Detection of a new interstellar molecular ion, H2COH+ (protonated formaldehyde)

A new interstellar molecular ion, H2COH+ (protonated formaldehyde), has been detected toward Sgr B2, Orion KL, W51, and possibly in NGC 7538 and DR21(OH). Six transitions were detected in Sgr B2(M). The 1(1,0)-1(0,1) transition was detected in all sources listed above. Searches were also made toward the cold, dark clouds TMC-1 and L134N, Orion (3N, 1E), and a red giant, IRC + 10216, without success. The excitation temperatures of H2COH+ are calculated to be 60-110 K, and the column densities are on the order of 10(12)-10(14) cm-2 in Sgr B2, Orion KL, and W51. The fractional abundance of H2COH+ is on the order of 10(-11) to 10-(9), and the ratio of H2COH+ to H2CO is in the range 0.001-0.5 in these objects. The values in Orion KL seem to be consistent with the "early time" values of recent model calculations by Lee, Bettens, & Herbst, but they appear to be higher than the model values in Sgr B2 and W51 even if we take the large uncertainties of column densities of H2CO into account. We suggest production routes starting from CH3OH may play an important role in the formation of H2COH+.     

Integrated chronostratigraphy of Proterozoic-Cambrian boundary beds in the western Anabar region, northern Siberia

Carbonate-rich sedimentary rocks of the western Anabar region, northern Siberia, preserve an exceptional record of evolutionary and biogeochemical events near the Proterozoic/Cambrian boundary. Sedimentologically, the boundary succession can be divided into three sequences representing successive episodes of late transgressive to early highstand deposition; four parasequences are recognized in the sequence corresponding lithostratigraphically to the Manykal Formation. Small shelly fossils are abundant and include many taxa that also occur in standard sections of southeastern Siberia. Despite this coincidence of faunal elements, biostratigraphic correlations between the two regions have been controversial because numerous species that first appear at or immediately above the basal Tommotian boundary in southeastern sections have first appearances scattered through more than thirty metres of section in the western Anabar. Carbon- and Sr-isotopic data on petrographically and geochemically screened samples collected at one- to two-metre intervals in a section along the Kotuikan River, favour correlation of the Staraya Reckha Formation and most of the overlying Manykai Formation with sub-Tommotian carbonates in southeastern Siberia. In contrast, isotopic data suggest that the uppermost Manykai Formation and the basal 26 m of the unconformably overlying Medvezhya Formation may have no equivalent in the southeast; they appear to provide a sedimentary and palaeontological record of an evolutionarily significant time interval represented in southeastern Siberia only by the sub-Tommotian unconformity. Correlations with radiometrically dated horizons in the Olenek and Kharaulakh regions of northern Siberia suggest that this interval lasted approximately three to six million years, during which essentially all 'basal Tommotian' small shelly fossils evolved.     

Use of precipitation data for diabatic initialization to improve the tropical analysis of divergence and moisture

Summary First, we review the present status of diabatic initialization used for numerical weather prediction and conclude that the deficiency of diabatic initialization mostly stems from the shortcoming in evaluating diabatic heating rates accurately, particularly the release of latent heat by cumulus convection. This indicates the need to adjust the initial conditions for physical processes, and Krishnamurti and his colleagues introduced in 1984 the concept of physical initialization. Since cumulus convection is most sensitive to input data among many physical processes, the adjustment of atmospheric input data to a prediction model to produce desired initial precipitation rates is referred to as cumulus initialization.In this article we describe a general approach to diabatic initialization with a special emphasis on cumulus initialization. We present the results of forecasting experiments with a version of the NCAR Community Climate Model (CCM) to demonstrate the efficacy of a cumulus initialization procedure to ameliorate the spinup problern of precipitation. Finally, we discuss application of the present methodology of cumulus initialization for a stability-dependent mass-flux cumulus parameterization of CCM2 to pave the way to complete the diabatic normal mode initialization package for CCM2. Note that the present cumulus initialization scheme can be used to assimilate into the atmospheric analysis of the tropics the precipitation rates estimated by satellite radiometric imagery data.With 8 FiguresThe National Center for Atmospheric Research is sponsored by the National Science Foundation     

Italian zeolitized rocks of technological interest

Large areas of Italian territory are covered by thick and widespread deposits of zeolite-bearing volcaniclastic products. The main zeolites are phillipsite and chabazite spread over the whole peninsula, and clinoptilolite recorded only in Sardinia. A trachytic to phonolitic glassy precursor accounts for the formation of the former zeolites characterized by low Si/Al ratios (3.00), while clinoptilolite is related to more acidic volcanism. The genesis of most of these zeolitized deposits is linked to pyroclastic flow emplacement mechanisms characterized by quite high temperatures and by the presence of abundant fluids. The main utilization of these materials has been and still is as dimension stones in the building industry. Currently, limited amounts are also employed in animal farming (dietary supplement, pet litter and manure deodorizer) and in agriculture as soil improvement and slow-release fertilizers. New fields of application have been proposed for these products on account of their easy availability, very low cost, their high-grade zeolites (50–70%), and good technological features such as high cation exchange capacities and adsorption properties.     

Overbreak and underbreak in underground openings Part 2: causes and implications

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.