Numerical simulation research on multi-electrodes resistivity imaging survey array

Multi-electrodes Resistivity Imaging Survey （MRIS） is an array method of electrical survey. In practice how to choose a reasonable array is the key to get reliable survey results. Based on four methods of MRIS such as Wenner, Schlumberger, Pole-pole and Dipole-dipole the authors established the model, by studying the result of the forward numerical simulation modeling and inverse modeling, and analyzed the differences among the different forms of detection devices.     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

A Linear Programming Model for Seabed Oil-Gas Pipe Network

This paper analyzes the pipe network system of oil-gas collection and transportation foroffshore oilfield development.A"0-1"integer linear programming model is constructed to optimize theinvestment of seabed pipe network.The mathematical model is solved by the spanning tree method ofgraph theory and network analysis.All spanning trees of a network graph compose all the feasible solu-tions of the mathematical model.The optimal solution of the model is the spanning tree with the minimumcost among all spanning trees.This method can be used to optimize the seabed pipe network system andgive a minimum cost plan for the development of offshore marginal oilfield groups.     

Model Test Study on Ice-Induced Vibrations of Compliant Multi-Cone Structures

For the study on the ice-induced vibration of a compliant mono-cone structure,a series of model tests were performed from 2004 to 2006.In these tests,the ice sheet before the compliant conical structure was found to be failed in two-time breaking.Based on this important finding,model tests study of the ice force on a compliant multi-cone structure were performed from 2006 to 2007.in these tests,the ice sheet broke before each single cone non-simultaneously.The exciting energy of the total ice force was found to be in a wide range of frequencies,and the structure can be easily excited with nonlinear resonance.     

Effect of Fly Ash on Frost-Resistance and Chloride Ions Diffusion Properties of Marine Concrete

It is necessary to pay more attention to the durability of concrete undergoing freeze-thaw cycles and seawater attack simultaneously.Investigated are the effects of water-binder ratio,fly ash (FA) contents and air-entraining agent on resistance to frost and chloride diffusion of marine concrete blended with FA in natural seawater.The results show that fly ash does not improve the frost resistance of concrete but can improve its resistance to chloride diffusion by addition of less than 30%.The resistance to frost and chloride diffusion of FA concrete can be improved with the decrease of water-binder ratio,and FA may improve both of them simultaneously only being mixed with air-entraining agent.A ratio (named as R) of the frost-resisting durability factor to chloride diffusion coefficient can be used to evaluate the durability of marine concrete.Scanning electron microscope (SEM) analyses are consistent with the evaluations by the value of R.     

The Optimal Design of TMD for Offshore Structures

This paper presents the optimal design procedure of Tuned Mass Damper(TMD)for re-ducing vibration of an actual steel jacket offshore platform excited by random wave loading.In this study,a frequency domain is taken.The force on the structure is determined by use of the linearized Morisonequation for an input Power Spectral Density(PSD)of wave elevation.The sensitivity of optimum valuesof TMD to characteristic parameters of random wave spectrum is analyzed.An optimized TMD designfor the modeled platform is given based on design conditions and the findings of the study.     

Application of Line Boundary Technique to 2D Tidal Current Simulation

To deal with the problems concerning the shore boundary,moving boundary and engineeringboundary which are encountered frequently in 2D tidal current simulation by the finite difference method,theconcept of line boundary is introduced and studied here,and then the line boundary technique in common useis proposed in this paper.Analysis of some calculation cases shows that this technique is practical,effective,and simple in 2D tidal current simulation involving different boundaries.     

危害后季稻的秋季低温预报方法

本文以农谚为线索,采用多张概率图作为综合因子,用逐步回归的方法试作了危害后季稻的秋季低温预报指标,希望通过这些指标能比较早而准确地预报出秋季低温到来的迟早,供领导部门参考,以便采取措施,避免或减轻低温带来的危害。本指标已在实际中使用四年,预报与实况均符合,取得了一定的服务效果。     

Comparison of Three Tropical Cyclone Intensity Datasets

Analyzed in this paper are the 16-yr (1988-2003) tropical cyclone (TC) intensity data from three major forecast centers of the western North Pacific, i.e., China Meteorological Administration (CMA), Regional Specialized Meteorological Center Tokyo (RSMC Tokyo), and Joint Typhoon Warning Center (JTWC) of the United States. Results show that there are significant discrepancies (at 1% significance level) in the intensity of TCs among the three centers, with a maximum difference for the same TC over 30 m s-1. The flight reconnaissance over TC can minish the discrepancy to some extent. A climatic and persistent prediction model is set up to study the impact of initial data from different forecast centers on the prediction of TC intensity. It is obtained that the root mean square error (RMSE) of a 4-yr independent test is the largest using data from JTWC, while the smallest using data from RSMC Tokyo. Average absolute deviation in 24-h intensity prediction is 2.5 m s-1 between CMA and RSMC Tokyo data, and 4.0 m s-1 between CMA and JTWC data, with a maximum deviation reaching 21 m s-1. Such a problem in the initial value increases the difficulty in intensity prediction of TCs over the western North Pacific.