滇黔桂盆地及邻区二叠纪层序地层格架及古地理演化

滇黔桂盆地及邻区的二叠系包括船山统、阳新统和乐平统。船山统与阳新统之交的黔桂运动主幕不整合面、阳新统和乐平统之交的东吴运动主幕不整合面的不整合特征明显,同时因其代表了研究区沉积盆地性质发生较大变化的界面而成为较为典型的I型层序界面。滇黔桂盆地及邻区的二叠系以其明显的沉积相分异而引人注目：在连陆台地上发育含煤地层,而在连陆台地边缘及孤立台地上发育海绵生物礁,形成一个典型的“台-盆-丘-槽”的古地理格局。伴随着强烈的东吴运动第一幕,研究区西北部发生强烈的火山活动,形成分布范围较广的峨嵋山玄武岩;东南部的“钦防残留海槽”关闭,使研究区的古地理格局发生了较大变化。二叠系与三叠系之交发生的较为典型的台地淹没事件形成了一个较为典型的淹没不整合面。根据沉积物的时间演化序列和沉积相的空间展布形式所指示的规律,研究区的二叠系可以划分为以下三级层序：船山统与下伏石炭系顶部的地层构成一个三级层序(SQ¹⁹),阳新统包含四个三级层序(SQ²⁰到SQ²³),乐平统包括两个三级层序(SQ²⁴和SQ²⁵)。在层序地层框架内,系列古地理图和系列层序地层格架栅状图较为系统地反映了研究区二叠纪复杂而有序的时间和空间相变特征。主要的时间相变面即形成层序界面,具有明显的“跳相”和地层间断现象,由于在不同地点间断的时限不一致而造成“间断面穿时”;沉积环境的空间变化,以及伴随着时间变化中的相带迁移所造成的空间相变,其相应的相变面总是斜交时间面而造成“相变面穿时”;不同沉积阶段的层序具有不同的相序组构,并在空间上形成有序的变化,从而代表了不同的古地理背景。因此,层序地层研究的核心内容是“沉积物的时间演变序列和沉积相的空间展布形式所代表的规律性”,结合生物地层特征,这种规律性本身也可以作为地层划分和对比的标志。     

岩浆成矿体系的热演化和剥露史的数字模拟

通过对岩浆冷却过程的数字模拟研究,揭示出岩浆在冷却成矿过程中的温度分布和变化规律及影响因素．在此基础上,进一步应用高精度的温龄计组合来限定岩浆成矿体系的热演化和剥露历史,精确地计算出岩浆的初始侵位时间和深度、矿物结晶时间、冷却速率、冷却和暴露地表时间,以及剥露和剥蚀速率等重要参数,并将模拟结果应用于斑岩铜矿床的成矿研究中．研究表明,将精确的年龄测试手段与计算机模拟技术相结合,可为定量研究岩浆矿床的热演化和剥露史、深入了解矿床的成因机制提供一种有效方法．     

塔里木盆地库车坳陷白垩纪层序地层格架及古地理演化

白垩纪的库车坳陷是一个干旱气候条件下的内陆坳陷,其中只发育下白垩统,为一套干旱红层地层,进一步划分为亚格列木组、舒善河组、巴西盖组和巴什基奇克组。该套干旱红层,包括洪积扇砾岩、间歇性河流砂砾岩、风成砂岩和沙漠湖紫红色泥岩等沉积。这些沉积在地层记录中常以一种特别的旋回性形式产出,在不整合面及其相关面之上首先沉积的是洪积扇砾岩和间歇性河流砂砾岩所构成的冲积沉积物,向上逐渐演变为沙漠湖红色泥岩,在成湖初期或湖退期发育了滨湖相风成砂岩,它们构成了一个较为典型的沙漠沉积体系。从冲积沉积到湖泊沉积构成总体向上变细的沉积相序组合。按照地层记录的旋回性进行三级沉积层序划分,将库车坳陷下白垩统划分为5个三级沉积层序即SQ1至SQ5。下白垩统的顶和底界面均为间断时间很长的区域不整合面,由它们所限定的下白垩统本身则构成一个二级构造层序,在二级构造层序内三级沉积层序常常形成有规律的叠加形式,下部的SQ1和上部的SQ5发育较多的冲积粗碎屑物,中部SQ2至SQ4则以湖泊相沉积为主。与海相地层不同,库车坳陷白垩系中由三级层序和二级层序所代表的地层记录中的中周期和长周期旋回的主要控制因素是幕式构造沉降,沉降初期由于地形高差大而以发育冲积粗碎屑物为主,均衡沉降期则与成湖期相对应从而发育较多的细粒沙漠湖沉积。以沉积物的时间演化序列和沉积相的空间展布形式所代表的规律性入手,建立库车坳陷下白垩统的层序地层格架,在层序地层框架内,系列层序地层格架栅状图和相应的古地理图较为清晰地反映出早白垩世库车坳陷的古地理面貌,以及相应的沉积岩相古地理演变过程。     

Earthquake-controlling Processes of Detachment Zones in Eastern North China

The basin-and-range area in eastern North China is known for frequent occurrence of earthquakes, their great magnitudes and heavy losses thereby incurred. Seismic studies in the past usually emphasized the intersections, inflexions and branches of the faults. However, the intensities of many great earthquakes in this area do not show linear distribution, and the epicenters are horizontally dispersed at certain depths instead of along the strike of faults. Based on the sub-mantle plume studies made by authors in the past decade, it is thought that there exists an uplifted sub-mantle plume under the fault depression area in North China. The uplifting and intrusion of mantle materials caused the upper crust to be faulted, while low-velocity and high-velocity layers are alternatively distributed in the middle crust under the influence of the mantle and the lower crust. The middle and lower crust materials were detached from the top of the sub-mantle plume to the surroundings while the sub-mantle plume materi     

Classification of 24 New Ordinary Chondrites from the Grove Mountains, Antarctica

Petrography and mineral chemistry of 24 ordinary chondrites from the Grove Mountains, Antarctica, have been studied in order to identify their chemical-petrographic types. These samples were selected from a total of 4448 Grove Mountains (GRV) meteorites collected during the 19th Chinese Antarctic Research Expedition so as to make an estimation of the large GRV meteorite collection. The chemical-petrographic types of these meteorites are presented below: 1 H3,2 H4, 4 H5, 2 H6, 1 L4, 7 L5, 5 L6, 1 LL4 and 1 LL6. The new data weaken the previous report that unequilibrated ordinary chondrites are unusually abundant in the Grove Mountains region. However, this work confirms significant differences in distribution patterns of chemical-petrographic types between the Grove Mountains and other     

Carboniferous Mixed Terrigenous Clastic, Carbonate and Sulphate Sediments in the Bachu Area, Xinjiang

The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat and lagoon environments. The mixed sediments occur as the following eleven types: 1. limestone intercalated with siltstone; 2. interbeds of shale and limestone; 3. gypsolyte interbedded with limestone; 4. gypsolyte intercalated with siltstone; 5. gypsolyte interbedded with shale; 6. gypsolyte intercalated with siltstone, limestone and dolomite; 7. siltstone interbedded with gypsolyte and limestone; 8. terrigenous detritus scattered in carbonate matrix; 9. carbonate as cement in clastic rocks; 10. mixed sediments of carbonate and terrigenous mud; 11. mixed sediments of carbonate grains with terrigenous sand. Based on the analysis of the dynamic mechanism of mixed sediments, it is believed that these types of mixed sediments in the study area were controlled by climate, sea level change and so     

A Probabilistic Model for Fatigue Crack Propagation Analysis

A simple probabilistic model for predicting crack growth behavior under random loading is pre-sented.In the model,the parameters c and m in the Paris-Erdogan Equation are taken as random variables,and their stochastic characteristic values are obtained through fatigue crack propagation tests on an offshorestructural steel under constant amplitude loading.Furthermore,by using the Monte Carlo simulation tech-nique,the fatigue crack propagation life to reach a given crack length is predicted.The tests are conducted toverify the applicability of the theoretical prediction of the fatigue crack propagation.     

Breaking Criteria for Regular Waves on Gentle Slopes

Nelson pointed out that the wave breaking criterion(H/d)_b for gentle slopes(i<1/100),inwhich H is the wave height and d is the water depth at the breaking point,is smaller than that for beachslopes of i>1/100),i.e.,the value of(H/d)_b for gentle slopes may be smaller than 0.6.Goda indicatedthat the wave breaking criterion given by himself is a result based on theoretical study,so it should be alsocorrect and can be used for gentle beaches,i.e.,the value of(H/d)_b for gentle slopes may be still largerthan 0.7.By use of high order nonlinear wave theory,this problem is analyzed in this study and the reasonwhy there is a large difference between different studies is explained.Moreover,the bottom energy loss dur-ing wave propagation is considered and the critical slope for the absence of wave breaking is also analyzed.     

Simulation of Stress Distribution around Tunnels and Interaction between Tunnels Using an Elasto–plastic Model

This article presents a computer simulation of stress distribution around tunnels and interaction between tunnels using an elasto-plastic model. A finite element method using ANSYS software has been used for the analyses of one and two tunnels at different overburden depths with different separating distances between the tunnels. The results of numerical analyses indicate that stress distribution and stress concentration around the tunnels vary with the overburden depths. It is found that the coefficients of stress concentration for elasto-plastic medium are smaller than those for elastic one by 1.9%. Furthermore, the interaction between the two tunnels rapidly decreases with the increase of separation distance between them. In addition, for quantitatively describing the interaction between the two tunnels, a critical separation distance is introduced. The critical separation distances between the two tunnels at different overburden depths are 8 m, 12 m, and 14 m respectively. This fact is very important and essential for the design of mining tunnels and to ensure safety in tunnel engineering.     

Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin, Northern Guangdong, China

Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper, we have revealed the temporo-spatial evolution law of the basin＇s fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. （1） The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. （2） The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. （3） The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits. （4） The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn- S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to move upwards, but also the fluids often crossed the faults to the edges of the basin at the bottom of these faults and the lithologic interfaces, and even migrated to the basin＇s edges from top to bottom along the faults, which may be one of the basic reasons for the stratabound deposits to cluster mainly along the contemporaneous faults on the inner border of the basin. The superposed mineralization resulting from the multi-stage activity of contemporaneous faults and ore-forming fluid systems in the basin may be one of the key factors for forming superlarge ore deposits.