Monitoring the Impact of Simulated Deep-sea Mining in Central Indian Basin

Monitoring of deep-sea disturbances, naturai or man-made, has gained significance due to the associated sediment transport and for the ensuing alterations in environmental conditions. During the Indian Deep-sea Environment Experiment (INDEX), resuspension of deep-sea sediment in the Central Indian Basin (CIB) resulted in an increase and lateral movement of suspended particles, vertical mixing of sediments, changes in sedimentological, biochemical, and geochemical conditions and an overall reduction in benthic biomass. Monitoring the conditions 44 months after the experiment has shown a partial recovery of the benthic ecosystem, with indications of restoration and recolonization.     

Behaviour of square footing on sand reinforced with coir geocell

The use of geosynthetics as a ground improvement technique offers the advantages such as space saving, environmental sensitivity, material availability, technical superiority, higher cost savings and less construction time. Coir geotextiles can be considered as an efficient replacement to its synthetic counterparts due to its economy and excellent engineering properties. The present study aims at exploring the possibilities of utilising coir geocells as a potential reinforcement material for shallow foundations and thereby increasing the load carrying capacity of soil. Geocells were fabricated from coir geotextiles with the aim of providing an additional confinement to the soil. An enumerated parametric study was conducted by varying the relative density, depth of the first layer, width and height of coir geocell. The surface displacement profiles of the non-reinforced and coir geocell-reinforced soil indicate that the footing rotation and heave are considerably reduced with the provision of geocell. The results of the relative density study indicate that bearing capacity characteristics increase with denseness of the soil sample. It was also observed that geocell arrangement and configuration play a pivotal role in the performance characteristics of reinforced soil.     

Investigating CO<Subscript>2</Subscript>-enhanced oil recovery potential for a mature oil field: a case study based on Ankleshwar oil field,Cambay Basin,India

CO₂-enhanced oil recovery (EOR) is an upcoming technology in India. At present, no Indian field is under CO₂-EOR and implementation of this technique to a mature oil field needs a rigorous study. In the present work, we made an attempt to investigate the CO₂-EOR potential of a mature oil field, situated in Cambay Basin, India. The field was put on production in 1961, and it has produced approximately 65.36 MMt oil during massive water flooding, leading to residual oil reserves of 6.49 MMt. The operator of the field is interested in incremental oil recovery from this field by injecting CO₂. This requires estimation of incremental oil recovery potential of the field by carrying out systematic study. We, therefore, developed a conceptual model inspired by Ankleshwar oil field of Cambay Basin using available information provided by the field operator and carried out systematic studies to establish an optimized strategy for CO₂ injection. To achieve this goal, we investigated the effect of various operational parameters on oil recovery efficiency of our conceptual model and selected optimum parameters for reservoir simulations. Simulation results clearly indicate that the field can be a good candidate for CO₂-EOR, and an additional oil recovery of 10.4% of hydrocarbon pore volume is feasible. Major outcome of the study is an optimized black-oil simulation model, which is in good agreement with the fine grid compositional model of high accuracy. The proposed black-oil model can easily be implemented and updated compared with compute intensive finer compositional simulation model.     

Reliability Analysis of Excavation Induced Basal Heave

The present study deals with the reliability analysis of basal heave caused by excavation considering uncertainty in the soil properties. The case study considered in the present work has been analyzed deterministically by Hsieh et al. (Can Geotech J 45:788–799, 2008). Taiwan building code is adopted in the method for analyzing the basal heave failure. The random variables (undrained shear strength and total unit weight of clay) are assumed to be normally distributed and uncorrelated. A series of parametric studies have been conducted to calculate the reliability index on the basis of the matrix formulation for the second moment method by Hasofer and Lind (J Eng Mech ASCE 100(1):111–121, 1974) considering different coefficient of variation of undrained shear strength and total unit weight of clay layers. It has been found that for a particular value of coefficient of variation of total unit weight, the reliability index with respect to occurrence of basal heave failure decreases with increase in the coefficient of variation of undrained shear strength. Moreover, the reliability index also decreases when the coefficient of variation of total unit weight increases. It has also been found that the probability of basal heave failure is lower with respect to factor of safety equals to 1.2, as compared to factor of safety equals to 1.0. Sensitivity analysis shows that the undrained shear strength of the bottommost layer and total unit weight of the second layer are the most significant random variables affecting the reliability index. Guidelines are provided for reliability based design where, for ‘target’ reliability index of 2.5 and 3.0, the factor of safety can be chosen such that all the related uncertainties are taken into account, especially with regard to undrained shear strength of the bottommost layer and total unit weight of the second layer. Design guidelines have been provided for this purpose.     

Is an onset vortex important for monsoon onset over Kerala?

Inter-annual variability in the formation of the mini warm pool [sea-surface temperature (SST)>30°C] over the south eastern Arabian Sea (SEAS) and its role in the formation of the monsoon onset vortex (MOV) has been examined using two independent SST data sets. The role of SST, convection, integrated columnar water vapour and the low-level jet in the setting up of the monsoon onset over Kerala (MOK) is examined. It is found that the MOV which forms over the SEAS region upsets the delicate balance between convection, buildup of moisture and strengthening and deepening of the westerlies over the SEAS that is needed for the setting up of the MOK. Thus, the formation over the SEAS of an MOV is not necessarily conducive for MOK. Furthermore, it is shown that a mini warm pool over the southeastern Arabian Sea is not a sufficient condition for the formation of an MOV because such a warm pool is present over this region during most of the years, but an MOV does not necessarily form over there.     

Origin of the Deccan Trap flows at Mahabaleshwar inferred from Nd and Sr isotopic and chemical evidence

The Deccan flows at Mahabaleshwar are divisible into a lower and an upper group, based on Nd and Sr isotopic ratios, which define two correlated trends. This distinction is supported by incompatible element ratios and bulk compositions. The data reflect contamination in a dynamic system of magmas from an LIL-depleted,ε_JUV ≥ +8 mantle by two different negative ε_JUV endmembers, one undoubtedly continental crust, the other either continental crust or enriched mantle. The depleted mantle source, anomalously high in (⁸⁷Sr/⁸⁶Sr), may have been in the subcontinental lithosphere or a region of rising Indian Ocean MORB mantle.     

Distribution and enrichment of trace metals in marine sediments of Bay of Bengal,off Ennore,south-east coast of India

In order to avoid the pollution of trace metals in marine environment, it is necessary to establish the data and understand the mechanisms influencing the distribution of trace metals in marine environment. The concentration of heavy metals (Fe, Mn, Cr, Cu, Ni, Pb, Zn, Co and Cd) were studied in sediments of Ennore shelf, to understand the metal contamination due to heavily industrialized area of Ennore, south-east coast of India. Concentration of metals shows significant variability and range from 1.7 to 3.7% for Fe, 284–460 μg g⁻¹ for Mn, 148.6–243.2 μg g⁻¹ for Cr, 385–657 μg g⁻¹ for Cu, 19.8–53.4 μg g⁻¹ for Ni, 5.8–11.8 μg g⁻¹ for Co, 24.9–40 μg g⁻¹ for Pb, 71.3–201 μg g⁻¹ for Zn and 4.6–7.5 μg g⁻¹ for Cd. For various metals the contamination factor (CF) and geoaccumulation index (I _geo) has been calculated to assess the degree of pollution in sediments. The geoaccumulation index shows that Cd, Cr and Cu moderately to extremely pollute the sediments. This study shows that the major sources of metal contamination in the Ennore shelf are land-based anthropogenic ones, such as discharge of industrial wastewater, municipal sewage and run-off through the Ennore estuary. The intermetallic relationship revealed the identical behavior of metals during its transport in the marine environment.     

Palaeo-path investigation of the lower Ajay River (India) using archaeological evidence and applied remote sensing

Numerous palaeochannels, oxbow lakes and elongated sediment fills in Eastern India, particularly along the lower Ajay River, provide a record of channel shifting during the Late Quaternary. Proper characterization of these features is useful for discussing the dynamic evolution of the river system in the Ajay-Damodar Interfluve region. Remote sensing data, archaeological evidence and sedimentology aid in reconstructing the geomorphic history of the lower Ajay River. Archaeological studies help in calculating the rate and direction of channel migration. The channel migration rate varies from 0.32 to 3.41 m/year in the study area. Bouguer gravity anomalies suggest that the rate of channel migration may be controlled by the density variations of the basement rocks. Furthermore, neotectonics activity played a significant role in the migration of Ajay River towards north-east direction.