Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

The environmental management of shipping

The environmental management of shipping requires systematic consideration of the geography of shipping routes, ship types and cargoes, and environments which can form the basis of a classificatory approach to Environmental Impact Assessment (EIA). Beyond this, effective environmental management depends in the first instance upon sound information management including monitoring of the environment, surveillance of shipping and information technology, followed by information assessment including, in particular, risk and environmental impact. The general management dimension includes co-ordination of technical management and organisational aspects related to shipping. It is suggested that effective environmental management of shipping may depend upon a regionalisation of the marine environment for EIA purposes akin to that found in the loadline rules, together with rationalisation of the increasing number of special areas in existence or proposed for this purpose. EIA will have to become an integral part of the overall management system in the shipping industry.     

Hypothesis for a submarine landslide and cohesionless sediment flows resulting from a 17th century earthquake-triggered landslide in Quebec,Canada

Textural isotopic and microfossil data from two gravity cores obtained in Saguenay Fjord, Quebec, suggest that a distinctive sandy clay bed was deposited as the result of a major landslide in the Saguenay River basin. Pb-210 dating of the cores indicate that the bed is of similar age to the magnitude 7 earthquake of February 5, 1663. The slide involved sensitive marine clays and may have occurred in two stages. Slide sediments carried into the Saguenay River channel were probably reworked and subsequently transported down the Fjord basin as two distinct cohesionless mass flows. Fine clay laminae that overlie the older mass flow bed record the modulation of depositional processes by tidal currents for several weeks after this event.     

Cycling the representer algorithm for variational data assimilation with a nonlinear reduced gravity ocean model

The representer method was used by [Ngodock, H.E., Jacobs, G.A., Chen, M., 2006. The representer method, the ensemble Kalman filter and the ensemble Kalman smoother: a comparison study using a nonlinear reduced gravity ocean model. Ocean Modelling 12, 378–400] in a comparison study with the ensemble Kalman filter and smoother involving a 1.5 nonlinear reduced gravity idealized ocean model simulating the Loop Current (LC) and the Loop Current eddies (LCE) in the Gulf of Mexico. It was reported that the representer method was more accurate than its ensemble counterparts, yet it had difficulties fitting the data in the last month of the 4-month assimilation window when the data density was significantly decreased. The authors attributed this failure to increased advective nonlinearities in the presence of an eddy shedding causing the tangent linear model (TLM) to become inaccurate. In a separate study [Ngodock, H.E., Smith, S.R., Jacobs, G.A., 2007. Cycling the representer algorithm for variational data assimilation with the Lorenz attractor. Monthly Weather Review 135 (2), 373–386] applied the cycling representer algorithm to the Lorenz attractor and demonstrated that the cycling solution was able to accurately fit the data within each cycle and beyond the range of accuracy of the TLM, once adjustments were made in the early cycles, thus overcoming the difficulties of the non-cycling solution. The cycling algorithm is used here in assimilation experiments with the nonlinear reduced gravity model. It is shown that the cycling solution overcomes the difficulties encountered by the non-cycling solution due to a limited time range of accuracy of the TLM. Thus, for variational assimilation applications where the TLM accuracy is limited in time, the cycling representer becomes a very powerful and attractive alternative, given that its computational cost is significantly lower than that of the non-cycling algorithm.     

Cross-shelf exchange in a model of the Ross Sea circulation and biogeochemistry

Transport of warm, nutrient-rich Circumpolar Deep Water (CDW) onto Antarctic continental shelves and coastal seas has important effects on physical and biological processes. The present study investigates the locations of this transport and its dynamics in the Ross Sea with a high-resolution three-dimensional numerical model. The model circulation is forced by daily wind stress along with heat and salt fluxes calculated from atmospheric climatologies by bulk formulae. All surface fluxes are modified by an imposed climatological ice cover. Waters under the Ross Ice Shelf are not included explicitly, but their effect on temperature and salinity is imposed in a buffer zone at the southern end of the model domain. A simple nutrient uptake is calculated based on the climatological chlorophyll distribution and Monod uptake kinetics.Model circulation is strongly affected by bottom topography, due to weak stratification, and agrees with schematics of the general flow and long-term current measurements except near the southern boundary. The sea-surface temperature is similar to satellite estimates except that the warmest simulated temperatures are slightly higher than observations. There is a significant correlation between the curvature of the shelf break and the transport across the shelf break. A momentum term balance shows that momentum advection helps to force flow across the shelf break in specific locations due to the curvature of the bathymetry (that is, the isobaths curve in front of the flow). For the model to create a strong intrusion of CDW onto the shelf, it appears two mechanisms are necessary. First, CDW is driven onto the shelf at least partially due to momentum advection and the curvature of the shelf break; then, the general circulation on the shelf takes the CDW into the interior.     

Animal-sediment relations in shallow water benthic communities

Ninety benthic samples were used to study animal-sediment relations in Tomales Bay, California. While most of the benthic species studied were found more often in a particular type of substrate, individuals of such species were occasionally found in other substrates. There is a striking tendency for species occurring outside of their characteristic environment to be associated with the most diverse assemblages of the foreign substrate. Species low in the order of succession are those species that are found more frequently on other substrates. These phenomena are explained in terms of environmental stability. The concepts involved suggest a means of predicting the sequence of faunal changes following the alteration of the substrate.     

Usefulness of classification and index properties of clay-rich sediments in evaluating sea-bed environmental conditions

A comprehensive study of undisturbed, mostly silty clay samples, taken from large-diameter surface cores collected in the North Atlantic and its bordering seas, shows that measurement of the Atterberg limits, water content, specific gravity of grains and grain-size distribution can provide the basis for predicting many seabed geotechnical and geophysical properties which can lead to a quick assessment of environmental conditions. Thus, the sediment compression curve can be reconstructed, acoustic properties assessed, electrical and thermal resistivities deduced and an indication of the shearing forces, which have affected the sediment, inferred.