Flow patterns of lobate debris aprons and lineated valley fill north of Ismeniae Fossae, Mars: Evidence for extensive mid-latitude glaciation in the Late Amazonian

A variety of Late Amazonian landforms on Mars have been attributed to the dynamics of ice-related processes. Evidence for large-scale, mid-latitude glacial episodes existing within the last 100 million to 1 billion years on Mars has been presented from analyses of lobate debris aprons (LDA) and lineated valley fill (LVF) in the northern and southern mid-latitudes. We test the glacial hypothesis for LDA and LVF along the dichotomy boundary in the northern mid-latitudes by examining the morphological characteristics of LDA and LVF surrounding two large plateaus, proximal massifs, and the dichotomy boundary escarpment north of Ismeniae Fossae (centered at 45.3°N and 39.2°E). Lineations and flow directions within LDA and LVF were mapped using images from the Context (CTX) camera, the Thermal Emission Imaging Spectrometer (THEMIS), and the High Resolution Stereo Camera (HRSC). Flow directions were then compared to topographic contours derived from the Mars Orbiter Laser Altimeter (MOLA) to determine the down-gradient components of LDA and LVF flow. Observations indicate that flow patterns emerge from numerous alcoves within the plateau walls, are integrated over distances of up to tens of kilometers, and have down-gradient flow directions. Smaller lobes confined within alcoves and superposed on the main LDA and LVF represent a later, less extensive glacial phase. Crater size-frequency distributions of LDA and LVF suggest a minimum (youngest) age of 100 Ma. The presence of ring-mold crater morphologies is suggestive that LDA and LVF are formed of near-surface ice-rich bodies. From these observations, we interpret LDA and LVF within our study region to result from formerly active debris-covered glacial flow, consistent with similar observations in the northern mid-latitudes of Mars. Glacial flow was likely initiated from the accumulation and compaction of snow and ice on plateaus and in alcoves within the plateau walls as volatiles were mobilized to the mid-latitudes during higher obliquity excursions. Together with similar analyses elsewhere along the dichotomy boundary, these observations suggest that multiple glacial episodes occurred in the Late Amazonian and that LDA and LVF represent significant reservoirs of non-polar ice sequestered below a surface lag for hundreds of millions of years.     

Fish trapping experiments in Northern New Zealand waters

Fish trapping experiments were carried out during 1973–75 along the north‐east coast of the North Island. The most effective trap type was the Z‐trap. Two sizes of Z‐trap were tested. Better results were obtained with the larger ones, which had an overall mean catch rate of 8.4 fish/trap day. The catch rate varied widely between areas, bottom types, and seasons. Best results were obtained in summer in depths greater than 20 m.     

Reproductive biology of Mustelus lenticulatus from Kaikoura and Nelson

Mustelus lenticulatus is a non‐placental ovoviviparous shark with a gestation period of about 11 months. Young are born at a total length of 30–32 cm from September to December. Copulation, and ovulation of a further set of eggs, rapidly follows parturition. Fecundity increases with the length of the female; the most eggs found in one female was 24; the mean for all females was 10.73.

Males mature at about 85 cm total length and females at 95 cm at Kaikoura. Nelson males probably mature at a smaller size than do Kaikoura males. Nelson females mature at about 85 cm. Maximum observed lengths were 137 cm for females and 115 cm for males.     

Shear stress partitioning in large patches of roughness in the atmospheric inertial sublayer

Drag partition measurements were made in the atmospheric inertial sublayer for six roughness configurations made up of solid elements in staggered arrays of different roughness densities. The roughness was in the form of a patch within a large open area and in the shape of an equilateral triangle with 60 m long sides. Measurements were obtained of the total shear stress (τ) acting on the surfaces, the surface shear stress on the ground between the elements (τ_S) and the drag force on the elements for each roughness array. The measurements indicated that τ_S quickly reduced near the leading edge of the roughness compared with τ, and a τ_S minimum occurs at a normalized distance (x/h, where h is element height) of (downwind of the roughness leading edge is negative), then recovers to a relatively stable value. The location of the minimum appears to scale with element height and not roughness density. The force on the elements decreases exponentially with normalized downwind distance and this rate of change scales with the roughness density, with the rate of change increasing as roughness density increases. Average τ_S : τ values for the six roughness surfaces scale predictably as a function of roughness density and in accordance with a shear stress partitioning model. The shear stress partitioning model performed very well in predicting the amount of surface shear stress, given knowledge of the stated input parameters for these patches of roughness. As the shear stress partitioning relationship within the roughness appears to come into equilibrium faster for smaller roughness element sizes it would also appear the shear stress partitioning model can be applied with confidence for smaller patches of smaller roughness elements than those used in this experiment.     

Temporal and geochemical evolution of the Cenozoic intraplate volcanism of Zealandia

In order to constrain better the distribution, age, geochemistry and origin of widespread Cenozoic intraplate volcanism on Zealandia, the New Zealand micro-continent, we report new ⁴⁰Ar/³⁹Ar and geochemical (major and trace element and Sr–Nd–Hf–Pb isotope) data from offshore (Chatham Rise, Campbell and Challenger Plateaus) and onland (North, South, Auckland, Campbell, Chatham and Antipodes Islands of New Zealand) volcanism on Zealandia. The samples include nephelinite, basanite through phonolite, alkali basalt through trachyte/rhyolite, and minor tholeiite and basaltic andesite, all of which have ocean island basalt (OIB)-type trace element signatures and which range in age from 64.8 to 0.17 Ma. Isotope ratios show a wide range in composition (⁸⁷Sr/⁸⁶Sr = 0.7027–0.7050, ¹⁴³Nd/¹⁴⁴Nd = 0.5128–0.5131, ¹⁷⁷Hf/¹⁷⁶Hf = 0.2829–0.2831, ²⁰⁶Pb/²⁰⁴Pb = 18.62–20.67, ²⁰⁷Pb/²⁰⁴Pb = 15.54–15.72 and ²⁰⁸Pb/²⁰⁴Pb = 38.27–40.34) with samples plotting between mid-ocean-ridge basalts (MORB) and Cretaceous New Zealand intraplate volcanic rocks.Major characteristics of Zealandia's Cenozoic volcanism include longevity, irregular distribution and lack of age progressions in the direction of plate motion, or indeed any systematic temporal or spatial geochemical variations. We believe that these characteristics can be best explained in the context of lithospheric detachment, which causes upwelling and melting of the upper asthenospheric mantle and portions of the removed lithosphere. We propose that a large-scale seismic low-velocity anomaly, that stretches from beneath West Antarctica to Zealandia at a depth of > 600 km may represent a geochemical reservoir that has been in existence since the Cretaceous, and has been supplying the upper mantle beneath Zealandia with HIMU-type plume material throughout the Cenozoic. In addition, the sources of the Cenozoic intraplate volcanism may be at least partially derived through melting of locally detached Zealandia lower lithosphere.     

Sulfur cycling at the Mid-Atlantic Ridge: A multiple sulfur isotope approach

The role of sulfur in two hydrothermal vent systems, the Logatchev hydrothermal field at 14°45′N/44°58′W and several different vent sites along the southern Mid-Atlantic Ridge (SMAR) between 4°48′S and 9°33′S and between 12°22′W and 13°12′W, is examined by utilizing multiple sulfur isotope and sulfur concentration data. Isotope compositions for sulfide minerals and vent H₂S from different SMAR sites range from + 1.5 to + 8.9‰ in δ³⁴S and from + 0.001 to + 0.051‰ in Δ³³S. These data indicate mixing of mantle sulfur with sulfur from seawater sulfate. Combined δ³⁴S and Δ³³S systematics reveal that vent sulfide from SMAR is characterized by a sulfur contribution from seawater sulfate between 25 and 33%. This higher contribution, compared with EPR sulfide, indicates increased seawater sulfate reduction at MAR, because of a deeper seated magma chamber and longer fluid upflow path length, and points to fundamental differences with respect to subsurface structures and fluid evolution at slow and fast spreading mid-ocean ridges.Additionally, isotope data uncover non-equilibrium isotopic exchange between dissolved sulfide and sulfate in an anhydrite bearing zone below the vent systems at fluid temperatures between 335 and 400 °C. δ³⁴S values between + 0.2 to + 8.8‰ for dissolved and precipitated sulfide from Logatchev point to the same mixing process between mantle sulfur and sulfur from seawater sulfate as at SMAR. δ³⁴S values between ? 24.5 and + 6.5‰ and Δ³³S values between + 0.001 and + 0.125‰ for sulfide-bearing sediments and mafic/ultramafic host rocks from drill cores taken in the region of Logatchev indicate a clear contribution of biogenic sulfides formed via bacterial sulfate reduction. Basalts and basaltic glass from SMAR sites with Δ³³S = ? 0.008‰ reveal lower Δ³³S lower values than suggested on the basis of previously published isotopic measurements of terrestrial materials.We conclude that the combined use of both δ³⁴S and Δ³³S provides a more detailed picture of the sulfur cycling in hydrothermal systems at the Mid-Atlantic Ridge and uncovers systematic differences to hydrothermal sites at different mid-ocean ridge sites. Multiple sulfur isotope measurements allow identification of incomplete isotope exchange in addition to isotope mixing as a second important factor influencing the isotopic composition of dissolved sulfide during fluid upflow. Furthermore, based on Δ³³S we are able to clearly distinguish biogenic from hydrothermal sulfides in sediments even when δ³⁴S were identical.     

The effect of sulfur on the partitioning of Ni and other first-row transition elements between olivine and silicate melt

The effect of sulfur dissolved as sulfide (S²⁻) in silicate melts on the activity coefficients of NiO and some other oxides of divalent cations (Ca, Cr, Mn, Fe and Co) has been determined from olivine/melt partitioning experiments at 1400 °C in six melt compositions in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS), and in derivatives of these compositions at 1370 °C, obtained from the six CMAS compositions by substituting Fe for Mg (FeCMAS). Amounts of S²⁻ were varied from zero to sulfide saturation, reaching 4100 μg g⁻¹ S in the most sulfur-rich silicate melt. The sulfide solubilities compare reasonably well with those predicted from the parameterization of the sulfide capacity of silicate melts at 1400 °C of O’Neill and Mavrogenes (2002), although in detail systematic deviations indicate that a more sophisticated model may improve the prediction of sulfide capacities.The results show a barely discernible effect of S²⁻ in the silicate melt on Fe, Co and Ni partition coefficients, and also surprisingly, a tiny but resolvable effect on Ca partitioning, but no detectable effect on Cr, Mn or some other lithophile incompatible elements (Sc, Ti, V, Y, Zr and Hf). Decreasing Mg# of olivine (reflecting increasing FeO in the system) has a significant influence on the partitioning of several of the divalent cations, particularly Ca and Ni. We find a remarkably systematic correlation between and the ionic radius of M²⁺, where M = Ca, Cr, Mn, Fe, Co or Ni, which is attributable to a simple relationship between size mismatch and excess free energies of mixing in Mg-rich olivine solid solutions.Neither the effect of S²⁻ nor of Mg#^ol is large enough by an order of magnitude to account for the reported variations of obtained from electron microprobe analyses of olivine/glass pairs from mid-ocean ridge basalts (MORBs). Comparing these MORB glass analyses with the Ni-MgO systematics of MORB from other studies in the literature, which were obtained using a variety of analytical techniques, shows that these electron microprobe analyses are anomalous. We suggest that the reported variation of with S content in MORB is an analytical artifact.Mass balance of melt and olivine compositions with the starting compositions shows that dissolved S²⁻ depresses the olivine liquidus of haplobasaltic silicate melts by 5.8 × 10⁻³ (±1.3 × 10⁻³) K per μg g⁻¹ of S²⁻, which is negligible in most contexts. We also present data for the partitioning of some incompatible trace elements (Sc, Ti, Y, Zr and Hf) between olivine and melt. The data for Sc and Y confirm previous results showing that and decrease with increasing SiO₂ content of the melt. Values of average 0.01 with most falling in the range 0.005-0.015. Zr and Hf are considerably more incompatible than Ti in olivine, with and about 10⁻³. The ratio / is well constrained at 0.611 ± 0.016.     

Evidence for distinct proportions of subducted oceanic crust and lithosphere in HIMU-type mantle beneath El Hierro and La Palma, Canary Islands

Shield-stage high-MgO alkalic lavas from La Palma and El Hierro (Canary Islands) have been characterized for their O-Sr-Nd-Os-Pb isotope compositions and major-, trace-, and highly siderophile-element (HSE: Os, Ir, Ru, Pt, Pd, Re) abundances. New data are also reported for associated evolved rocks, and entrained xenoliths. Clear differences in Pd/Ir and isotopic ratios for high Os (>50 ppt) lavas from El Hierro (δ¹⁸O_olivine = 5.17 ± 0.08‰; ⁸⁷Sr/⁸⁶Sr = 0.7029 to 0.7031; ε_Nd = +5.7 to +7.1; ¹⁸⁷Os/¹⁸⁸Os = 0.1481 to 0.1750; ²⁰⁶Pb/²⁰⁴Pb = 19.1 to 19.7; Pd/Ir = 6 ± 3) versus those from La Palma (δ¹⁸O_olivine = 4.87 ± 0.18‰; ⁸⁷Sr/⁸⁶Sr = 0.7031 to 0.7032; ε_Nd = +5.0 to +6.4; ¹⁸⁷Os/¹⁸⁸Os = 0.1421 to 0.1460; ²⁰⁶Pb/²⁰⁴Pb = 19.5 to 20.2; Pd/Ir = 11 ± 4) are revealed from the dataset.Crustal or lithospheric assimilation during magma transport cannot explain variations in isotopic ratios or element abundances of the lavas. Shallow-level crystal-liquid fractionation of olivine, clinopyroxene and associated early-crystallizing minerals (e.g., spinel and HSE-rich phases) controlled compatible element and HSE abundances; there is also evidence for sub-aerial degassing of rhenium. High-MgO lavas are enriched in light rare earth elements, Nb, Ta, U, Th, and depleted in K and Pb, relative to primitive mantle abundance estimates, typical of HIMU-type oceanic island basalts. Trace element abundances and ratios are consistent with low degrees (2-6%) of partial melting of an enriched mantle source, commencing in the garnet stability field (?110 km). Western Canary Island lavas were sulphur undersaturated with estimated parental melt HSE abundances (in ppb) of 0.07 ± 0.05 Os, 0.17 ± 0.16 Ir, 0.34 ± 0.32 Ru, 2.6 ± 2.5 Pt, 1.4 ± 1.2 Pd, 0.39 ± 0.30 Re. These estimates indicate that Canary Island alkali basalts have lower Os, Ir and Ru, but similar Pt, Pd and Re contents to Hawai’ian tholeiites.The HIMU affinities of the lavas, in conjunction with the low δ¹⁸O_olivine and high ²⁰⁶Pb/²⁰⁴Pb for La Palma, and elevated ¹⁸⁷Os/¹⁸⁸Os for El Hierro implies melting of different proportions of recycled oceanic crust and lithosphere. Our preferred model to explain isotopic differences between the islands is generation from peridotitic mantle metasomatised by <10% pyroxenite/eclogite made from variable portions of similar aged recycled oceanic crust and lithosphere. The correspondence of radiogenic ²⁰⁶Pb/²⁰⁴Pb, ¹⁸⁷Os/¹⁸⁸Os, elevated Re/Os and Pt/Os, and low-δ¹⁸O in western Canary Island lavas provides powerful support for recycled oceanic crust and lithosphere to generate the spectrum of HIMU-type ocean island basalt signatures. Persistence of geochemical heterogeneities throughout the stratigraphies of El Hierro and La Palma demonstrate long-term preservation of these recycled components in their mantle sources over relatively short-length scales (∼50 km).     

‘Unionising’ the new spaces of the new economy? Alternative labour organising in India’s IT Enabled Services-Business Process Outsourcing industry

This paper explores the lived experiences and aspirational social constructions of call centre work and employment in India’s high profile IT Enabled Services-Business Process Outsourcing (ITES-BPO) industry; the ways in which they differ from those previously documented amongst call centre workers in the Global North (specifically the UK); and the consequences of that geographical reconfiguration of offshored call centre work for the replicability in India of workplace collective bargaining strategies successfully developed in some UK call centres. These issues are analysed using new empirical evidence from a regional survey of 511 non-unionised ITES-BPO workers and 42 in-depth interviews in India’s National Capital Region. Based on this analysis, the paper then discusses the operation, outcomes and ongoing challenges faced by the newly formed ‘Union for ITES Professionals’ (UNITES Pro) in developing an alternative occupational organising model better suited to the particular needs, motivations and preferences of India’s young, mobile, call centre workers. The empirical analysis presented in the paper is located, therefore, within wider debates on the role of geographical context in shaping possibilities for organising white-collar service workers at different ends of global service chains in the new economy.     

Investigating the effect of soil models on deformations caused by braced excavations through an inverse-analysis technique

In this study, a series of inverse-analysis numerical experiments was performed to investigate the effect of soil models on the deformations caused by excavation by using the finite element method. The nonlinear optimization technique that was incorporated into the finite element code was used for the inverse-analysis numerical experiments. Three soil models (the hyperbolic model, pseudo-plasticity model, and modified pseudo-plasticity model) were employed in the intended numerical experiments on a well-documented excavation case history. The results indicate that wall deflection due to excavation can be accurately back-figured by each of the three soil models, while the ground surface settlement can be reasonably optimized only by the pseudo-plasticity model and the modified pseudo-plasticity model. Importantly, the modified pseudo-plasticity model can yield more reasonable simulations when the wall deflection and the ground surface settlement are simultaneously back-figured. The results show that selection of an adequate soil model that is capable of adequately describing the stress–strain-strength characteristics of the soils is essentially crucial when predicting the excavation-induced ground response.