Scales and magnitude of hyporheic,river–aquifer and bank storage exchange fluxes

Many studies have investigated the exchange processes that occur between rivers and groundwater systems and have successfully quantified the water fluxes involved. Specifically, these exchange processes include hyporheic exchange, river–aquifer exchange (groundwater discharge and river loss) and bank storage exchange. Remarkably, there are relatively few examples of field studies where more than one exchange process is quantified, and as a consequence, the relationships between them are not well understood. To compare the relative magnitudes of these common exchange processes, we have collected data from 54 studies that have quantified one or more of these exchange flux types. Each flux value is plotted against river discharge at the time of measurement to allow the different exchange flux types to be compared. We show that there are positive relationships between the magnitude of each exchange flux type and increasing river discharge across the different studies. For every one order of magnitude increase in river discharge, the hyporheic, river–aquifer and bank storage exchange fluxes increase by factors of 2.7, 2.9 and 2.5, respectively. On average, hyporheic exchange fluxes are almost an order of magnitude greater than river–aquifer exchange fluxes, which are, in turn, approximately four times greater than bank storage exchange fluxes for the same river discharge. Unless measurement approaches that can distinguish between different types of exchange flux are used, there is potential for hyporheic exchange fluxes to be misinterpreted as river–aquifer exchange fluxes, with possible implications for water resource management decisions. Copyright © 2015 John Wiley & Sons, Ltd.     

Tectonic systems and the deposition of iron-formation

The iron-formation group of chemically precipitated cherty iron-rich sediments ranges in age from Early Precambrian to Recent and is composed of a variety of lithological facies. Iron-formations are classified as Lake Superior and Algoma types to emphasize the contrasting conditions in the spectrum of sedimentary-tectonic environments in which they formed. Thick stratigraphic units of Lake Superior type iron-formation, which form the most extensive iron ranges of the world, are part of sedimentary-tectonic systems that developed along the margins of cratons or continental platforms and were deposited over extended periods of time under relatively stable tectonic conditions. The Algoma type iron-formations were deposited with volcanic rocks and greywacke in various tectonic-volcanic systems, formed under more dynamic tectonic conditions, but are otherwise comparable to present day spreading ridges on the ocean floor. The thick sequences of Lake Superior type iron-formation deposited between 2.7 and 2.0 Ga form part of major sedimentary-tectonic systems that extended along the margins of continents. Direct biogenic factors and the composition of the atmosphere probably had only limited influence on the precipitation of these chemical sediments.     

Using Diurnal Temperature Signals to Infer Vertical Groundwater‐Surface Water Exchange

Heat is a powerful tracer to quantify fluid exchange between surface water and groundwater. Temperature time series can be used to estimate pore water fluid flux, and techniques can be employed to extend these estimates to produce detailed plan‐view flux maps. Key advantages of heat tracing include cost‐effective sensors and ease of data collection and interpretation, without the need for expensive and time‐consuming laboratory analyses or induced tracers. While the collection of temperature data in saturated sediments is relatively straightforward, several factors influence the reliability of flux estimates that are based on time series analysis (diurnal signals) of recorded temperatures. Sensor resolution and deployment are particularly important in obtaining robust flux estimates in upwelling conditions. Also, processing temperature time series data involves a sequence of complex steps, including filtering temperature signals, selection of appropriate thermal parameters, and selection of the optimal analytical solution for modeling. This review provides a synthesis of heat tracing using diurnal temperature oscillations, including details on optimal sensor selection and deployment, data processing, model parameterization, and an overview of computing tools available. Recent advances in diurnal temperature methods also provide the opportunity to determine local saturated thermal diffusivity, which can improve the accuracy of fluid flux modeling and sensor spacing, which is related to streambed scour and deposition. These parameters can also be used to determine the reliability of flux estimates from the use of heat as a tracer.     

Spatial and temporal variability of ground water recharge in central Australia: a tracer approach

Two environmental tracer methods are applied to the Ti-Tree Basin in central Australia to shed light on the importance of recharge from floodouts of ephemeral rivers in this arid environment. Ground water carbon-14 concentrations from boreholes are used to estimate the average recharge rate over the interval between where the ground water sample first entered the saturated zone and the bore. Environmental chloride concentrations in ground water samples provide estimates of the recharge rate at the exact point in the landscape where the sample entered the saturated zone. The results of the two tracer approaches indicate that recharge rates around one of the rivers and an extensive floodplain are generally higher than rates of diffuse recharge that occurs in areas of lower topographic relief. Ground water 2H/1H and 18O/16O compositions are all depleted in the heavier isotopes (delta2H = -67 per thousand to -50 per thousand; delta18O = -9.2 per thousand to -5.7%o) compared with the long-term, amount-weighted mean isotopic composition of rainfall in the area (delta2H = -33.8 per thousand; delta18O = -6.3 per thousand). This indicates that recharge throughout the basin occurs only after intense rainfall events of at least 150 to 200 mm/month. Finally, a recharge map is developed to highlight the spatial extent of the two recharge mechanisms. Floodout recharge to the freshest ground water (TDS <1,000 mg/L) is approximately 1.9 mm/year compared with a mean recharge rate of approximately 0.2 mm/year to the remainder of the basin. These findings have important implications for management of the ground water resource.     

Estimating Flow Using Tracers and Hydraulics in Synthetic Heterogeneous Aquifers

Regional ground water flow is most usually estimated using Darcy's law, with hydraulic conductivities estimated from pumping tests, but can also be estimated using ground water residence times derived from radioactive tracers. The two methods agree reasonably well in relatively homogeneous aquifers but it is not clear which is likely to produce more reliable estimates of ground water flow rates in heterogeneous systems. The aim of this paper is to compare bias and uncertainty of tracer and hydraulic approaches to assess ground water flow in heterogeneous aquifers. Synthetic two-dimensional aquifers with different levels of heterogeneity (correlation lengths, variances) are used to simulate ground water flow, pumping tests, and transport of radioactive tracers. Results show that bias and uncertainty of flow rates increase with the variance of the hydraulic conductivity for both methods. The bias resulting from the nonlinearity of the concentration–time relationship can be reduced by choosing a tracer with a decay rate similar to the mean ground water residence time. The bias on flow rates estimated from pumping tests is reduced when performing long duration tests. The uncertainty on ground water flow is minimized when the sampling volume is large compared to the correlation length. For tracers, the uncertainty is related to the ratio of correlation length to the distance between sampling wells. For pumping tests, it is related to the ratio of correlation length to the pumping test's radius of influence. In regional systems, it may be easier to minimize this ratio for tracers than for pumping tests.     

Abrupt changes as indicators of decadal climate variability

 A statistical test has revealed that abrupt regional climate changes are produced in a coupled atmosphere-ocean general circulation model. Abrupt changes are detected over much of the globe although the occurrence frequency is small over the continents. Over the tropical Pacific Ocean and northern Pacific Ocean, surface air temperature (SAT) and sea level pressure (SLP) shift rapidly on decadal time scales. The regional climate changes presented here have been classified into three types. The first type consists of statistically significant shifts in SLP and statistically significant shifts in SAT which are of opposite sign, and which are reinforced through a positive feedback between the atmosphere and the ocean. The second type is for those occurrences where changes are of the same sign. The third type includes those with a significant shift in only one meteorological element. The second and third types are generally generated by changes in air pressure and wind fields induced by changes of the first type. For example, when SLP increases and sea surface temperature (SST) decreases abruptly in the tropical Pacific Ocean, it triggers abrupt regional changes in middle and high latitudes. The abrupt changes in the model climate have characteristics which are very similar to those of observed rapid shifts. Thus, it is concluded that abrupt changes are a predominant part of regional climate change on decadal time scales. Received: 11 February 1999 / Accepted: 18 May 2000     

Sub-Saharan Northern African climate at the end of the twenty-first century: forcing factors and climate change processes

A regional climate model, the Weather Research and Forecasting (WRF) Model, is forced with increased atmospheric CO₂ and anomalous SSTs and lateral boundary conditions derived from nine coupled atmosphere–ocean general circulation models to produce an ensemble set of nine future climate simulations for northern Africa at the end of the twenty-first century. A well validated control simulation, agreement among ensemble members, and a physical understanding of the future climate change enhance confidence in the predictions. The regional model ensembles produce consistent precipitation projections over much of northern tropical Africa. A moisture budget analysis is used to identify the circulation changes that support future precipitation anomalies. The projected midsummer drought over the Guinean Coast region is related partly to weakened monsoon flow. Since the rainfall maximum demonstrates a southward bias in the control simulation in July–August, this may be indicative of future summer drying over the Sahel. Wetter conditions in late summer over the Sahel are associated with enhanced moisture transport by the West African westerly jet, a strengthening of the jet itself, and moisture transport from the Mediterranean. Severe drought in East Africa during August and September is accompanied by a weakened Indian monsoon and Somali jet. Simulations with projected and idealized SST forcing suggest that overall SST warming in part supports this regional model ensemble agreement, although changes in SST gradients are important over West Africa in spring and fall. Simulations which isolate the role of individual climate forcings suggest that the spatial distribution of the rainfall predictions is controlled by the anomalous SST and lateral boundary conditions, while CO₂ forcing within the regional model domain plays an important secondary role and generally produces wetter conditions.     

Toxic Cyanobacteria in Greek Freshwaters, 1987—2000: Occurrence,Toxicity, and Impacts in the Mediterranean Region

In a survey in Greece from 1987 to 2000 hepatotoxic cyanobacterial blooms were observed in 9 out of 33 freshwaters. Microcystins (MCYSTs) were detected by HPLC in 7 of these lakes, and the total MCYST concentration per scum dry weight ranged from 50.3 to 1638 ± 464 μg g^—1. Cyanobacterial genera (Microcystis, Anabaena, Anabaenopsis, Aphanizomenon, Cylindrospermopsis) with known toxin producing taxa were present in 31 freshwaters. From our data and a review of the literature, it would appear that Mediterranean countries are more likely 1) to have toxic cyanobacterial blooms consisting of Microcystis spp. and 2) to have higher intracellular MCYST concentrations. A case study in Lake Kastoria is used to highlight seasonal patterns of cyanobacterial and MCYST‐LR occurrence and to assess cyanotoxin risk. Cyanobacterial biovolume was high (> 11 μL L^—1) throughout the year and was in excess of Guidance Level 2 (10 μL L^—1) proposed by WHO for recreational waters and Alert Level 2 for drinking water. Further, surface water samples from April to November exceeded Guidance Level 3, with the potential for acute cyanobacterial poisoning. Intracellular MCYST‐LR concentrations (max 3186 μg L^—1) exceeded the WHO guideline for drinking water (1 μg L^—1) from September to November with a high risk of adverse health effects. Preliminary evidence indicates that in 3 lakes microcystins are accumulated in some aquatic organisms. Generally, a high risk level can be deduced from the data for the Mediterranean region.     

Induced Temperature Gradients to Examine Groundwater Flowpaths in Open Boreholes

Techniques for characterizing the hydraulic properties and groundwater flow processes of aquifers are essential to design hydrogeologic conceptual models. In this study, rapid time series temperature profiles within open‐groundwater wells in fractured rock were measured using fiber optic distributed temperature sensing (FO‐DTS). To identify zones of active groundwater flow, two continuous electrical heating cables were installed alongside a FO‐DTS cable to heat the column of water within the well and to create a temperature difference between the ambient temperature of the groundwater in the aquifer and that within the well. Additional tests were performed to examine the effects of pumping on hydraulic fracture interconnectivity around the well and to identify zones of increased groundwater flow. High‐ and low‐resolution FO‐DTS cable configurations were examined to test the sensitivities of the technique and compared with downhole video footage and geophysical logging to confirm the zones of active groundwater flow. Two examples are presented to demonstrate the usefulness of this new technique for rapid characterization of fracture zones in open boreholes. The combination of the FO‐DTS and heating cable has excellent scope as a rapid appraisal tool for borehole construction design and improving hydrogeologic conceptual models.