Topographic effects observed at Amatrice hill during the 2016-2017 Central Italy seismic sequence

The estimate of seismic site effects by experimental approaches is based on different assumptions aimed at simplifying the complex actual site conditions and related uncertainties.However,the reliability of the results can increase if the experimental data is focused on quite strong seismic sequences and the on-site acquisition of a large number of signals is deemed strategic for the assessment of the expected phenomena.Based on these considerations,the ground motion at the Red Zone sector of Amatrice hill,violently struck by the 2016-2017 Central Italy seismic sequence,was analyzed via an observational approach.A large set of weak motions(moment magnitude Mw 2.5-3.9)was analyzed in this study by means of standard(SSR)and horizontal to vertical(HVSR)spectral ratio techniques.The results from the experimental analysis of the site effects by using weak motion and noise signals show a significant amplification at the top of Amatrice hill with a remarkable polarization of the motion and changes in spectral shapes according to the topographic setting of the relief.     

Some chemical characteristics of the brines in Bannock and Tyro Basins: salinity, sulphur compounds, Ca, F, pH, At, PO4, SiO2, NH3

Results of the chemical investigation on the Bannock and Tyro Basins are reported.Both basins were found to be hypersaline ( 10 times higher than salinity of normal seawater) and anoxic. In all investigated basins a region of transition, a few meters thick, was identified at depths > 3327 dbar. It is characterized by a sharp gradient of salinity, and all concentrations of analysed species increase strongly except for dissolved oxygen and nitrate, which immediately drop to zero. This region appears as a sharp boundary that prevents mixing. As a result, in the presence of organic matter, an anoxic condition developed with the complete depletion of dissolved oxygen. At the same time, hydrogen sulphide and ammonium accumulated within the brine. Between the Bannock and the Tyro brines differences occur in the measured concentrations of H₂S, SO²⁻₄, Ca²⁺ and NH₃. There are some differences also within the Bannock area sub-basins.The Libeccio sub-basin, in the Bannock area, contains a double-layered brine: the upper layer is 140 dbar thick and the lower layer is 300 dbar thick. A second interface between upper and lower brines develops at a depth of 3500 dbar. Nearly all of the measured concentrations vs. depth show the double layer, with the exception of ammonium, the concentration of which remains nearly constant throughout the anoxic column. Profiles of the other species analyzed show remarkable differences on passing from the upper to the lower brine. Hydrogen sulphide, sulphate and fluoride concentrations appear constant and then increase at the second interface. The calcium concentration is also constant in the upper brine, but decreases at the second interface. Total alkalinity and phosphate concentrations show a maximum peak just below the first interface. However, after passing through the second interface all the chemical parameters exhibit an almost constant behaviour down to the bottom.Hypersaline conditions are attributed to the dissolution of Messinian evaporite, and anoxia is suggested to originate from the oxidation of organic matter present in sediments and from the absence of bottom water circulation in such a deep and enclosed environment.The chemical conditions can be summarized as follows: in the Libeccio Basin the values for the species analysed have the ranges: 39–321 psu for ‘salinity’, 8.2−6.5 for pH, 2.7–4.0 mM for total alkalinity, 0.2-0 mM for dissolved oxygen, 0–1669 μM for hydrogen sulphide, 0–198 μM for thiol, 31–99 mM for sulphate, 11–21 mM for calcium, 7–100 μM for fluoride, 0.2–3080 μM for ammonium, 5.8-0 μM for nitrite, 0.2–12 μM for phosphate and 8–130 μM for silicate.     

Convective-conductive transitions and sensitivity of a convecting ice shell to perturbations in heat flux and tidal-heating rate: Implications for Europa

We investigate the response of conductive and convective ice shells on Europa to variations of heat flux and interior tidal-heating rate. We present numerical simulations of convection in Europa's ice shell with Newtonian, temperature-dependent viscosity and tidal heating. Modest variations in the heat flux supplied to the base of a convective ice shell, ΔF, can cause large variations of the ice-shell thickness Δδ. In contrast, for a conductive ice shell, large ΔF involves relatively small Δδ. We demonstrate that, for a fluid with temperature-dependent viscosity, the heat flux undergoes a finite-amplitude jump at the critical Rayleigh number Racr. This jump implies that, for a range of heat fluxes relevant to Europa, two equilibrium states—corresponding to a thin, conductive shell and a thick, convective shell—exist for a given heat flux. We show that, as a result, modest variations in heat flux near the critical Rayleigh number can force the ice shell to switch between the thin, conductive and thick, convective configurations over a ∼10⁷-year interval, with thickness changes of up to ∼10-30 km. Depending on the orbital and thermal history, such switches might occur repeatedly. However, existing evolution models based on parameterized-convection schemes have to date not allowed these transitions to occur. Rapid thickening of the ice shell would cause radial expansion of Europa, which could produce extensional tectonic features such as fractures or bands. Furthermore, based on interpretations for how features such as chaos and ridges are formed, several authors have suggested that Europa's ice shell has recently undergone changes in thickness. Our model provides a mechanism for such changes to occur.     

Biomarkers of Exposure and Effects for Assessing Toxicological Risk of Endocrine Disrupters in Top Predators of the Mediterranean Sea

Abstract. Endocrine Disrupting Chemicals (EDCs) have the potential to alter hormone pathways that regulate reproductive processes in wildlife and fisheries. In this research the unexplored hypothesis that Mediterranean top predator species (such as large pelagic fish and marine mammals) are potentially at risk due to EDCs is investigated. In the Mediterranean environment, top predators accumulate high concentrations of polyhalogenated aromatic hydrocarbons (PHAHs) and toxic metals, incurring high toxicological risk. Here we illustrate the need to develop sensitive biomarkers for evaluation of toxicological risk in top marine predators (Xiphias gladius, Thunnus thynnus thynnus) and non-lethal techniques, such as non-destructive biomarkers, for the hazard assessment of threatened species exposed to EDCs, such as marine mammals ( Stenella coeruleoalba, Tursiops truncatus, Delphinus delphis and Balaenoptera physalus ).     

An instrument for commissioning the active and adaptive optics of modern telescopes: the Infrared Test Camera for the Large Binocular Telescope

We describe the design, integration, and operation of the infrared test cameras for the commissioning of the Large Binocular Telescope. The design and construction phase lasted slightly more than one year from February 2007 to April 2008 and was the result of a joint collaboration among INAF Osservatorio Astronomico di Bologna, Università di Bologna Dipartimento di Astronomia (Italy) and the Max-Planck-Institut für Astronomie (Heidelberg, Germany). Thereafter, the camera was delivered to the LBT Observatory (USA) for commissioning of the telescope active optics and, more recently, for commissioning of the first light adaptive optics.     

A calibration system for superconducting gravimeters

A new method for the calibration of a superconducting gravity meter is described, in which a 273 Kg annular mass is placed around the meter and is moved up and down. The geometry of the apparatus is easy to model and the accuracy in the computation of the gravity variation induced by the mass, 6.7µgal, is limited only by the accuracy in the knowledge of value of the gravitational constant. Measurements done in 91 and 92 for the calibration of the instrument GWR-T015 are described. The calibration factor has been determined with a precision of about 0.3%.     

Improved dynamic correction method in seismic analysis of both classically and non‐classically damped structures

A step‐by‐step approximate procedure taking into consideration high‐frequency modes, usually neglected in the modal analysis of both classically and non‐classically damped structures, is presented. This procedure can be considered as an extension of traditional modal correction methods, like the mode‐acceleration method and the dynamic correction method, which are very effective for structural systems subjected to forcing functions described by analytical laws. The proposed procedure, herein called improved dynamic correction method, requires two steps. In the first step, the number of differential equations of motion are reduced and consequently solved by using the first few undamped mode‐shapes. In the second step, the errors due to modal truncation are reduced by correcting the dynamic response and solving a new set of differential equations, formally similar to the original differential equations of motion. The difference between the two groups of differential equations lies in the forcing vector, which is evaluated in such a way as to correct the effects of modal truncation on applied loads. Copyright © 2001 John Wiley & Sons, Ltd.     

Levels of chlorinated hydrocarbons in marine animals from the central Mediterranean

Concentrations of chlorinated hydrocarbons (DDT and metabolites, PCBs, aldrin, dieldrin, HCB and BHCs) have been determined in the tissues of five species of marine animals sampled in selected areas of the central Mediterranean.