Conditioning clayey soils with a dispersant agent for Deep Soil Mixing application: laboratory experiments and artificial neural network interpretation

Acta Geotechnica - Plasticity of clays makes Deep Soil Mixing (DSM) problematic due to the tendency of the material to congest the rotating blades, reduce mixing efficiency and remain...     

Subsidence due to peat oxidation and impact on drainage infrastructures in a farmland catchment south of the Venice Lagoon

Large agricultural areas reclaimed in the past century, south of the Venice Lagoon, have experienced significant land subsidence due to oxidation of peat organic soils. This has exposed the region to flood hazard particularly during severe storms and has contributed to increase the marginal management cost of the infrastructures (ditches, levees, pumping stations) designed to operate the drainage system. Direct measurements and indirect evidence from the channel network suggest a land settlement between 1.5 and 2 m over the past 70 years. This paper provides an overview of the problem with important information on its most recent evolution.     

Contribution of SHRIMP U–Pb zircon geochronology to unravelling the evolution of Brazilian Neoproterozoic fold belts

The South-American continent is constituted of three major geologic–geotectonic entities: the homonym platform (consolidated at the end of the Cambrian), the Andean chain (essentially Meso-Cenozoic) and the Patagonian terrains, affected by tectonism and magmatism through almost all of the Phanerozoic. The platform is constituted by a series of cratonic nuclei (pre-Tonian, fragments of the Rodinia fission) surrounded by a complex fabric of Neoproterozoic structural provinces.     

Permian continental basins in the Southern Alps (Italy) and peri-mediterranean correlations

The Late Carboniferous to Permian continental successions of the Southern Alps can be subdivided into two main tectono-sedimentary Cycles, separated by a marked unconformity sealing a Middle Permian time gap, generally estimated at over 10 Ma. The lower cycle (1), between the Variscan crystalline basement and the Early Permian, is mainly characterised by fluvio-lacustrine and volcanic deposits of calc-alkaline acidic-to-intermediate composition, which range up to a maximum thickness of more than 2,000 m. The upper cycle (2), which is devoid of volcanics, is mostly dominated through the Mid?–Late Permian by alluvial sedimentation which covered the previous basins and the surrounding highs, giving rise to the subaerial Verrucano Lombardo-Val Gardena (Gröden) red-beds, up to about 800 m thick. The palaeontological record from the terrigenous deposits of both the above cycles consists mainly of macro- and microfloras and tetrapod footprints. The age of the continental deposits is widely discussed because of the poor chronological significance of a large number of fossils which do not allow reliable datings; however, some sections are also controlled by radiometric calibrations. The comparison with some selected continental successions in southern Europe allows to determine their evolution and set up correlations. A marked stratigraphic gap shows everywhere between the above-mentioned Cycles 1 and 2. As in the Southern Alps, the gap reaches the greatest extent during the Mid-Permian, near the Illawarra Reversal geomagnetic event (265 Ma). In western Europe, however, such as in Provence and Sardinia, the discussed gap persists upwardly to Late Permian and Early Triassic or slightly younger times, i.e. to the onset of the “Alpine sedimentary Cycle”, even though in northeastern Spain (Iberian Ranges, Balearic Islands) this gap results clearly interrupted by late Guadalupian–Lopingian deposits. The above two major tectonosedimentary cycles reflect, in our view, two main geodynamic events that affected the southern Europe after the Variscan orogenesis: the Late Carboniferous–Early Permian transformation of the Gondwana–Eurasia collisional margin into a diffuse dextral transform margin and the Middle–Late Permian opening of the Neotethys Ocean, with the onset of a generalised extensional tectonic regime and the progressive westward marine ingression.     

A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

In situ time resolved synchrotron powder diffraction study of thaumasite

Structural changes during dehydration and subsequent decomposition in thaumasite Ca₃Si(SO₄)(CO₃)(OH)₆·12 H₂O were studied by in situ synchrotron powder diffraction between 303 and 1,098 K. Evolution of the crystal structure was observed through 28 structure refinements, by full profile Rietveld analysis performed in the P6₃ space group, between 300 and 417 K, whereupon the thaumasite structure was observed to breakdown. Within this temperature range, the cell parameters of thaumasite increased as a function of temperature in a nearly linear fashion up to about 393 K, at which temperature, a slight slope change was observed. Above 400 K, the thermogravimetric analysis revealed that the dehydration process proceeded very rapidly while the refined occupancy of water molecules dropped below a critical level, leading to instability in the thaumasite structure. At a same time, a remarkable change in the unit cell parameters occurring at about 417 K indicated that the crystal structure of thaumasite collapsed on losing the crystallization water and it turned amorphous. This result indicated that the dehydration/decomposition of thaumasite was induced by the departure of the crystallization water. At about 950 K, anhydrite and cristobalite crystallized from the thaumasite glass.     

Chemo‐mechanics of cemented granular solids subjected to precipitation and dissolution of mineral species

This paper studies the chemo‐mechanics of cemented granular solids in the context of continuum thermodynamics for fluid‐saturated porous media. For this purpose, an existing constitutive model formulated in the frame of the Breakage Mechanics theory is augmented to cope with reactive processes. Chemical state variables accounting for the reactions between the solid constituents and the solutes in the pore fluid are introduced to enrich the interactions among the microstructural units simulated by the model (i.e., grains and cement bonds). Two different reactive processes are studied (i.e., grain dissolution and cement precipitation), using the chemical variables to describe the progression of the reactions and track changes in the size of grains and bonds. Finally, a homogenization strategy is used to derive the energy potentials of the solid mixture, adopting probability density functions that depend on both mechanical and chemical indices. It is shown that the connection between the statistics of the micro‐scale attributes and the continuum properties of the solid enables the mathematical capture of numerous mechanical effects of lithification and chemical deterioration, such as changes in stiffness, expansion/contraction of the elastic domain, and development of inelastic strains during reaction. In particular, the model offers an interpretation of the plastic strains generated by aggressive environments, which are here interpreted as an outcome of chemically driven debonding and comminution. As a result, the model explains widely observed macroscopic signatures of geomaterial degradation by reconciling the energetics of the deformation/reaction processes with the evolving geometry of the microstructural attributes. Copyright © 2015 John Wiley & Sons, Ltd.     

Possibilita' di applicazione dei metodi geoelettrici di prospezione alla registrazione dei movimenti del magma entro i condotti vulcanici

Riassunto Dopo avere accennato all'importanza della registrazione dei movimenti del magma nel condotto vulcanico ai fini scientifici, viene mostrata, attraverso alcune esperienze, la possibilità di una utile registrazione e che tale possibilità può raggiungersi più facilmente mediante l'impiego dei seguenti metodi usati nella prospezione del sottosuolo: metodo di Wenner, metodo della misura diretta della resistenza, metodo induttivo.

---

Zusammenfassung Nach Hervorhebung der Wichtigkeit die Bewegungen des Magmas im innern eines Vulkans registrieren zu können, wird gezeigt, auf Grund einiger Experimente, wie diese Registrierung möglich ist und zwar durch die Anwendung der geoelektrischen Bodenforschungs-Verfahren, nähmlich: di Wenner-Methode, die Methode der direkten Widerstands-Messung, Induktions-Verfahren.

---

Résumé Après avoir fait allusion à l'importance scientifique de l'enregistrement des mouvements du magna dans le conduit d'un volcan, on démontre, avec quelques expériences, la possibilité d'un enregistrement convenable qu'on peut obtenir d'ailleurs plus aisément en enployant une des méthodes suivantes utilisées dans la prospection du sous-sol: méthode de Wenner, méthode de la mésure directe de la résistance, méthode inductive.

     

Variation of infiltration rate through karstic surfaces due to land use changes: A case study in Murgia (SE-Italy)

Groundwaters of the Murgia carbonate aquifer represent the main groundwater resource of the Apulia region (SE Italy). In the highlands (Alta Murgia) karst crops out in different forms and textures which have been preserved up to the 1970s: little evolved agriculture and sheep rearing produced only a marginal modification of the epikarst while a high degree of division into parcels by drystone walls helped in preserving soils from erosion. In the last years the original scenery of the Alta Murgia changed due to widespread transformations of surface karstic textures for agricultural purposes, with undeniable negative consequences on the hydrogeological balance, concerning both the infiltration and the runoff terms. Stone shattering led to flattening and deep alteration of a large part of the original karstic landscape and to demolition of drystone walls.In a study area of about 139 km² located in the Alta Murgia, the comparison of aerial photos related to the period 1950–2001 indicated that stone shattering had occurred for about 42% of the area.The hydrological behaviour of the first soil layer of experimental parcels representing both shattered stone and natural karstic surface textures was analysed by using the numerical model Hydrus-2D with the aim of estimating the variation on infiltration rate due to stone shattering. Intensive field and laboratory measurements concerned soil texture, soil water content, pressure head, saturated hydraulic conductivity, pan evaporation and meteorological parameters.