Non-invasive Geophysical Surveys in Search of the Roman Temple of Augustus Under the Cathedral of Tarragona (Catalonia,Spain): A Case Study

An integrated geophysical survey has been conducted at the Tarragona’s Cathedral (Catalonia, NE Spain) with the aim to confirm the potential occurrence of archaeological remains of the Roman Temple dedicated to the Emperor Augustus. Many hypotheses have been proposed about its possible location, the last ones regarding the inner part of the Cathedral, which is one of the most renowned temples of Spain (twelfth century) evolving from Romanesque to Gothic styles. A geophysical project including electrical resistivity tomography (ERT) and ground probing radar (GPR) was planned over 1 year considering the administrative and logistic difficulties of such a project inside a cathedral of religious veneration. Finally, both ERT and GPR have been conducted during a week of intensive overnight surveys that provided detailed information on subsurface existing structures. The ERT method has been applied using different techniques and arrays, ranging from standard Wenner–Schlumberger 2D sections to full 3D electrical imaging with the advanced Maximum Yield Grid array. Electrical resistivity data were recorded extensively, making available many thousands of apparent resistivity data to obtain a complete 3D image after a full inversion. In conclusion, some significant buried structures have been revealed providing conclusive information for archaeologists. GPR results provided additional information about shallowest structures. The geophysical results were clear enough to persuade religious authorities and archaeologists to conduct selected excavations in the most promising areas that confirmed the interpretation of geophysical data. In conclusion, the significant buried structures revealed by geophysical methods under the cathedral were confirmed by archaeological digging as the basement of the impressive Roman Temple that headed the Provincial Forum of Tarraco, seat of the Concilium of Hispania Citerior Province.     

Numerical Investigation of a Methane Leakage from a Geothermal Well into a Shallow Aquifer

The potential environmental impacts on subsurface water resources induced by unconventional gas production are still under debate. Solving the controversy regarding the potential adverse effects of gas leakages on groundwater resources is therefore crucial. In this work, an interesting real-world case is presented in order to give further insight into methane multiphase and transport behavior in the shallow subsurface, often disregarded compared to the behavior in the deep subsurface. Multiphase flow and solute transport simulations were performed to assess the vulnerability of an existing shallow unconfined aquifer with respect to a hypothetical methane leakage resulting from a well integrity failure of a former deep geothermal well. The analysis showed that migration of gaseous methane through the aquifer under examination can be extremely fast (of the order of a few minutes), occurring predominantly vertically upwards, close to the well. By contrast, dissolved methane migration is largely affected by the groundwater flow field and occurs over larger time scales (of the order of months/years), covering a greater distance from the well. Overall, the real concern for this site in case of gas leakages is the risk of explosion in the close vicinity of the well. Predicted maximum gaseous fluxes (0.89 to 22.60 m³/d) are comparable to those reported for leaking wells, and maximum dissolved methane concentrations may overcome risk mitigation thresholds (7 to 10 mg/L) in a few years. Therefore, surface and subsurface monitoring before decommissioning is strongly advised to ensure the safety of the site.     

Shaking table tests on a masonry building monitored using smart bricks: Damage detection and localization

The seismic behavior of unreinforced masonry buildings is typically characterized by premature brittle collapse mechanisms that can cause serious consequences for the protection of human lives and for the preservation of historical and cultural heritage. Structural health monitoring can be a powerful tool enabling a quick post-earthquake assessment of the structure's performance, but its applications are still scarce as a consequence of the severe limitations affecting off-the-shelf sensing technologies, in terms of local nature of the measurements, costs, as well as long-term behavior, installation, and maintenance. To overcome some of these limitations, the authors have recently proposed a new sensing technology, called “smart brick,” that is a durable clay brick doped with stainless steel microfibers, working as a smart strain sensor for masonry buildings. This paper presents the first full-scale application of smart bricks, used for detecting and localizing progressive earthquake-induced damage in an unreinforced masonry building subjected to shaking table tests. Smart bricks are employed to detect changes in load paths on masonry walls, comparing strain measurements acquired after each step of the seismic sequence with those referring to the undamaged structure. Experimental results are interpreted using a 3D finite element model built to reproduce the shaking table tests. Overall, the results demonstrate that the smart bricks can effectively reveal local permanent changes in structural conditions following a progressive damage, therefore being apt for earthquake-induced damage detection and localization.     

Changes in the wind-wave field and related salt-marsh lateral erosion: inferences from the evolution of the Venice Lagoon in the last four centuries

Salt marshes are crucially important ecosystems at the boundary between the land and the sea, that are experiencing significant losses worldwide mainly dictated by the erosion of their margins. Improving our understanding of the mechanisms controlling marsh edge erosion is a key step to address conservation issues and salt-marsh response to changes in the environmental forcing. Here we have employed a complete, coupled Wind-Wave Tidal Model (WWTM) to analyse the temporal evolution of the wave field, and in particular of the mean wave-power density, in the Venice Lagoon over the past four centuries (from 1611 to 2012). We have then related wave-field changes to the observed erosion patterns determined by comparing recent aerial photographs (1978–2010) and historical bathymetric data. The results of our analyses from the Venice Lagoon show that, while wave-fields did not significantly change from 1611 to 1901, a rapid increase in wave-power densities occurred in the last century. This is suggested to depend on the positive feedback between relevant morphological evolutions and changes in the wave field, both influenced by natural forcing and anthropogenic pressures. We also emphasize the existence of a strong positive linear relationship between the volumetric marsh erosion rate and mean wave-power density. We thus suggest that relating salt-marsh lateral erosion rates to properly computed mean wave-power densities provides a valuable tool to address long-term tidal morphodynamics. © 2019 John Wiley & Sons, Ltd.     

A design procedure for suspended zipper‐braced frames in the framework of Eurocode 8

In the recent past, suspended zipper‐braced frames were proposed to avoid one‐storey collapse mechanisms and dynamic instability under severe ground motions. In this paper, the design procedure suggested by Yang et al. is first slightly modified to conform to the design approach and capacity design rules stipulated in Eurocode 8 for concentrically braced frames. The procedure is applied to a set of suspended zipper‐braced frames with different number of storeys and founded on either soft or rock soil. The structural response of these frames is analysed to highlight qualities and deficiencies and to assess the critics reported by other researchers with regard to the design procedure by Yang et al. Then, improvements are proposed to this procedure to enhance the energy dissipation of the chevron braces and the response of the structural system as well. The effectiveness of the design proposals is evaluated by incremental dynamic analysis on structures with different geometric properties, gravity loads and soil of foundation. Copyright © 2017 John Wiley & Sons, Ltd.     

Innovation networks and green restructuring: Which path development can EU Framework Programmes stimulate in Norway?

ABSTRACT

With combined insights from evolutionary economic geography and transition studies, the article examines the engagement of different regions in Norway in the innovation networks created within the European Union’s environmental programmes. The aim is to explore the programmes’ potential for supporting green economy and economic restructuring through branching and new path creation. The authors assess which regions participate in the programmes, which international networks they build, and which organisations participate in different regions. They compare three regions with different restructuring needs and research capacity – the counties of Rogaland, Hordaland, and Sør-Trøndelag (now part of the county of Trøndelag). They find that overall, Norwegian organisations participate relatively frequently in the programmes, but private firms play a marginal role. Their partners are mainly in core EU regions. Regional participation in the programmes is a function of research capacity as well as oil dependence. The authors conclude that in research-oriented regions, research establishments tend to dominate participation, creating potential for restructuring mainly through path creation. In oil-dependent regions, private firms account for a higher share of participants, enhancing the potential for branching. As the former regions participate more, the programme can mainly stimulate path creation.     

Laboratory measurements of super-resolving Toraldo pupils for radio astronomical applications

The concept of super-resolution refers to various methods for improving the angular resolution of an optical imaging system beyond the classical diffraction limit. Although several techniques to narrow the central lobe of the illumination Point Spread Function have been developed in optical microscopy, most of these methods cannot be implemented on astronomical telescopes. A possible exception is represented by the variable transmittance filters, also known as “Toraldo Pupils” (TPs) since they were introduced for the first time by G. Toraldo di Francia in 1952 (Toraldo di Francia, Il Nuovo Cimento (Suppl.) 9, 426, 1952). In the microwave range, the first successful laboratory test of TPs was performed in 2003 (Mugnai et al. Phys. Lett. A 311, 77–81, 2003). These first results suggested that TPs could represent a viable approach to achieve super-resolution in Radio Astronomy. We have therefore started a project devoted to a more exhaustive analysis of TPs, in order to assess their potential usefulness to achieve super-resolution on a radio telescope, as well as to determine their drawbacks. In the present work we report on the results of extensive microwave measurements, using TPs with different geometrical shapes, which confirm the correctness of the first experiments in 2003. We have also extended the original investigation to carry out full-wave electromagnetic numerical simulations and also to perform planar scanning of the near-field and transform the results into the far-field.     

Transplantation of Spongia officinalis L. (Porifera,Demospongiae): a technical approach for restocking this endangered species

The present study focuses on the reproductive success of transplants of the bath sponge Spongia officinalis Linnaeus, 1759, with the aim of investigating the possibility of restocking this species, one of the most endangered organisms of the Mediterranean sessile zoobenthos. Transplants of S. officinalis, collected from a wild population along the Apulian coasts (Ionian Sea, Italy), have been moved into an area where the species was present in the past. The transplants consisted both of specimens in toto and of fragments of different sizes, obtained after having cut the mother sponge into pieces. All transplanted sponges showed complete cicatrisation of the cut surfaces within a month of the initial manipulation and had a survival rate of 100% throughout the 12 months of the study. From the present investigation, it has emerged that the reproductive effort and the larval release by the transplants do not differ significantly from those shown by the source population. This successful technical approach supports its application as a strategy for restocking the population of this endangered species.     

LIDAR strip adjustment: Application to volcanic areas

DEMs derived from LIDAR data are nowadays largely used for quantitative analyses and modelling in geology and geomorphology. High-quality DEMs are required for the accurate morphometric and volumetric measurement of land features. We propose a rigorous automatic algorithm for correcting systematic errors in LIDAR data in order to assess sub-metric variations in surface morphology over wide areas, such as those associated with landslide, slump, and volcanic deposits. Our procedure does not require a priori knowledge of the surface, such as the presence of known ground control points. Systematic errors are detected on the basis of distortions in the areas of overlap among different strips. Discrepancies between overlapping strips are assessed at a number of chosen computational tie points. At each tie point a local surface is constructed for each strip containing the point. Displacements between different strips are then calculated at each tie point, and minimization of these discrepancies allows the identification of major systematic errors. These errors are identified as a function of the variables that describe the data acquisition system. Significant errors mainly caused by a non-constant misestimation of the roll angle are highlighted and corrected. Comparison of DEMs constructed using first uncorrected and then corrected LIDAR data from different Mt. Etna surveys shows a meaningful improvement in quality: most of the systematic errors are removed and the accuracy of morphometric and volumetric measurements of volcanic features increases. These corrections are particularly important for the following studies of Mt. Etna: calculation of lava flow volume; calculation of erosion and deposition volume of pyroclastic cones; mapping of areas newly covered by volcanic ash; and morphological evolution of a portion of an active lava field over a short time span.