Geothermal mineralized scales in the pipe system of the geothermal Piancastagnaio power plant (Mt. Amiata geothermal area): a key to understand the stibnite,cinnabarite and gold mineralization of Tuscany (central Italy)

The CO₂-rich geothermal fluids produced in the Piancastagnaio geothermal field (Mt. Amiata geothermal area, Southern Tuscany, Italy) show temperatures up to 360°C and pressures of about 200 bar at depths of around 3,500 m (Giolito, Ph.D. thesis, Università degli Studi di Firenze, Italy, pp 1–147, 2005). CaCO₃- and/or SiO₂-dominated scales are deposited in the pipes leading to the pressure and atmospheric separators of the geothermal wells. High content of metastibnite and/or stibnite in both calcite and silica scales and Sb contents of up to 50 mg/L in the fluids indicate their mineralising potential. The red or black colours of the scales depend on the predominance of red metastibnite or black stibnite, respectively. In our condensation experiments, as well as during deposition of the scales, metastibnite is the first Sb₂S₃ mineral to form. In a second stage, metastibnite is transformed to stibnite. During depressurization the Hg content of geothermal fluids partitions preferentially into the gas phase, whereas Sb and As remain in the liquid phase. This separation explains the often observed areal separation of Hg and Sb mineralization. The multistage deposition of Sb in the mining district of Tuscany is due to a periodic restoration of the permeability of the ore-bearing faults by microseismic events and subsequent host rock brecciation. The still ongoing microseismic events are induced by the accumulation of high-pressure CO₂-rich fluids along faults followed by mechanical failure of the faults.     

Seismic characterization and monitoring of Fucino Basin (Central Italy)

The Fucino basin (Central Italy) is one of the largest intramountain alluvial plain in the Apennines range. It has a tectonic origin related to the presence of important systems of faults located in its northern and eastern edges. Some of these faults are still active and capable of generating strong seismic events. Site effects related to the soft soils filling the basin can be very important. In this paper we show the preliminary results of a seismic network installed in the Fucino area in order to collect information about site amplification effects and geometry of the basin. We analyze ambient seismic vibrations and recordings of about 150 local earthquakes mainly related to the seismic sequence of the April 6th 2009 Mw 6.3 L’Aquila event. Moreover the strongest events of L’Aquila sequence were analyzed at the three permanent strong-motion stations operating in the area. Using standard spectral techniques we investigate the variation of resonance frequencies within the basin. The ground motion recorded in the Fucino plain is mainly characterized by strong energy at low-frequencies (f < 1 Hz) affecting both horizontal and vertical components. This is particularly evident for stations deployed in correspondence of very thick deposits of sedimentary filling, where a significant increase of ground-motion amplitude and duration is likely caused by locally generated surface waves. The amplification at low-frequencies (<1 Hz) on the horizontal components can reach up a factor of 10 in comparison to nearby stiff sites. However, we found evidences of seismic amplification phenomena also for stiff sites surrounding the basin, including stations of the Italian strong motion network. The independent geological information and the shallow shear-velocity profiles available for the basin can be combined with resonance frequencies for deriving representative geological sections to be used as base for future numerical 2D–3D modeling of the basin.     

40Ar/39Ar laser probe dating of the Central European tektite‐producing impact event

Abstract— A new ⁴⁰Ar/³⁹Ar data set is presented for tektites from the Central European strewn field (moldavites). This is the only strewn field that is entirely situated in a continental environment and still characterized by scattered ages (14–15.3 Myr). The main objectives of the study were to define more precisely the moldavite formation age and provide a good calibration for a glass standard proposed for fission‐track dating. The laser total fusion ages obtained on chips from 7 individual specimens from the Southern Bohemian and Moravian subfields are restricted to a narrow interval of time, with an average of 14.34 ± 0.08 Myr relative to the 27.95 ± 0.09 Myr of the Fish Canyon Tuff biotite. This result gives a more precise age not only for the tektite field but also for its producing impact. If the genetic link between the moldavites and the Nördlinger Ries impact crater is maintained, then this new age has to be considered a reliable estimate for the Ries crater also. This new value places the formation of Central European tektites within the Lower Serravallian period in the latest geologic timescales. Evidence of their impact products, such as glass spherules or shocked minerals, can, therefore, be sought in sedimentary marine formations in a more precisely defined age interval.     

Neogene exhumation of the Marrakech High Atlas (Morocco) recorded by apatite fission-track analysis

Apatite fission-track (AFT) data have been obtained along a traverse across the Marrakech High Atlas to constrain its tectono-thermal evolution. AFT ages vary between 212 ± 15 Ma and 20 ± 4 Ma. An Early Miocene AFT age accompanied by long mean track length from the central part of the chain has been interpreted as the timing of the main inversion of this region with the creation of relief because of the shortening induced by the interplay between the African and Eurasian plates. Thermal modelling of samples collected south of the South Atlas Fault Zone indicates a Middle-Late Miocene or even later cooling that has been attributed to the component of the uplift of the chain related to the thermal anomaly present beneath the Atlas Mountains.     

K‐Ar illite age constraints on the Proterozoic formation and reactivation history of a brittle fault in Fennoscandia

K‐Ar ages of authigenic illite from two drill‐core gouge samples of a fault in the Palaeoproterozoic basement of Finland record two distinct faulting events. The older sample yields apparent ages from 1240 ± 26 to 1006 ± 21 Ma for four grain size fractions between 6 and <0.1 μm. The second sample is structurally younger and yields statistically distinct ages ranging from 978 ± 20 to 886 ± 18 Ma. We interpret the ages of the <0.1 m fractions, which are the youngest, as representing the actual time of faulting. XRD analysis and age modelling exclude significant age contamination of the finest dated fractions with inherited host rock components. These results provide therefore an example of meaningful isotopic dating of illite‐type clay material formed during Precambrian faulting, demonstrate and constrain fault reactivation and give evidence for brittle Sveconorwegian Mesoproterozoic shortening and Neoproterozoic extension in Fennoscandia.     

Updating knowledge on growth,population dynamics,and ecology of the blue and red shrimp,Aristeus antennatus (Risso, 1816), on the basis of the study of its instars

Both national (GRUND) and international (MEDITS) trawl surveys carried out in the Italian seas since 1994 have produced consistent and rather homogeneous samples of red shrimps (per season, gear, and methods to ascertain abundance). Study and discussion of data regarding Aristeus antennatus (Risso, 1816) from Ligurian fishing grounds during the REDs project (FISH/2004/03‐32) made it possible to verify how key instars of the life of the female shrimp can be recognized from length frequency distributions derived from trawl surveys, allowing the age distributions to be split up. The segment of life that can be studied spans ages 1 and 10 and includes 20 instars, but larger sizes have been found which may extend the life span another 3 years. After age 5, only one growth instar per year occurs. Based on our study of the instars, we developed a size/age key for A. antennatus and used it to derive a von Bertalanffy growth function, total mortality rates and exploitation rates. Our results are related to basic biological and ecological characteristics of this species. Large individuals (females ≥50 mm CL at age 5 onward) present in a considerable percentage in the Ligurian Sea, are very important because (i) their fecundity is very high and therefore greatly influences the reproductive potential and (ii) they represent commercially the most valuable part of the catch. In addition, substantial relationships between the life history of A. antennatus and local oceanographic processes exist because the long life span of the species enlarges the area to which eggs and larvae are transported in surface currents, as well as the active return movements in deep waters where adult life mainly takes place. In the study area, the Northern Current provides the possibility of great horizontal displacement of A. antennatus eggs, larvae and early juveniles and, in general, attention to surface circulation may help to identify affinities in distant Mediterranean populations. This study presents A. antennatus in terms of a resource on the move at a Western Mediterranean scale.     

The impacts of pyroclastic surges on buildings at the eruption of the Soufrière Hills volcano, Montserrat

We investigated the impacts on buildings of three pyroclastic surges that struck three separate villages on 25 June, 21 September and 26 December, 1997, during the course of the andesitic dome building eruption of the Soufrière Hills Volcano, Montserrat, which began on 18 July, 1995. A detailed analysis of the building damage of the 26 December event was used to compare the findings on the flow and behaviour of dilute pyroclastic density currents (PDCs) with the classical reports of PDCs from historical eruptions of similar size. The main characteristics of the PDC, as inferred from the building damage, were the lateral loading and directionality of the current; the impacts corresponded to the dynamic pressure of the PDC, with a relatively slow rate of rise and without the peak overpressure or a shock front associated with explosive blast; and the entrainment of missiles and ground materials which greatly added to the destructiveness of the PDC. The high temperature of the ash, causing the rapid ignition of furniture and other combustibles, was a major cause of damage even where the dynamic pressure was low at the periphery of the current. The vulnerability of buildings lay in the openings, mainly windows, which allowed the current to enter the building envelope, and in the flammable contents, as well as the lack of resistance to the intense heat and dynamic pressure of some types of vernacular building construction, such as wooden chattel houses, rubble masonry walls and galvanised steel-sheet roofs. Marked variability in the level of damage due to dynamic pressure (in a range 1–5 kPa, or more) was evident throughout most of the impact area, except for the zone of total loss, and this was attributable to the effects of topography and sheltering, and projectiles, and probably localised variations in current velocity and density. A marked velocity gradient existed from the outer part to the central axis of the PDC, where buildings and vegetation were razed to the ground. The gradient correlated with the impacts due to lateral loading and heat transfer, as well as the size of the projectiles, whilst the temperature of the ash in the undiluted PDC was probably uniform across the impact area. The main hazard characteristics of the PDCs were very consistent with those described by other authors in the classic eruptions of Pelée (1902), Lamington (1951) and St Helens (1980), despite differences in the eruptive styles and scales. We devised for the first time a building damage scale for dynamic pressure which can be used in research and in future volcanic emergencies for modelling PDCs and making informed judgements on their potential impacts. Editorial responsibility: T. Druitt     

Variations of local seismic response in Benevento (Southern Italy) using earthquakes and ambient noise recordings

The city of Benevento (Southern Italy) has been repeatedly struck by large historical earthquakes. A heterogeneous geologic structure and widespread soft soil conditions make the estimation of site effects crucial for the seismic hazard assessment of the city. From 2000 until 2004, we installed seismic stations to collect earthquake data over zones with different geological conditions. Despite the high level of urban noise, we recorded more than 150 earthquakes at twelve sites. This data set yields the first, well documented experimental evidence for weak to moderate local amplifications. We investigated site effects primarily by the classical spectral ratio technique (CSR) using a rock station placed on the Benevento hill as reference. All sites in the Calore river valley and in the eastern part of the Benevento hill show a moderate high-frequency (f > 4 Hz) amplification peak. Conversely, sites in the Sabato river valley share weak-to-moderate amplification in a wide frequency band (from 1–2 to 7–10 Hz), without evident frequency peaks. Application of no-reference-site techniques to earthquake and noise data confirms the results of the CSRs in the sites of the Calore river valley and of the eastern part of the Benevento hill, but fails in providing indications for site effects in the Sabato river valley, being the H/V ratios nearly flat. One-dimensional modeling indicates that the ground motion amplification can be essentially explained in terms of a vertically varying geologic structure. High-frequency narrow peaks are caused by the strong impedance contrast existing between near-surface soft deposits and stiff cemented conglomerates. Conversely, broad-band amplifications in the Sabato river valley are likely due to a more complex layering with weak impedance contrasts both in the shallow and deep structure of the valley.