Diagenetic and thermal history of the Jurassic-Tertiary succession of the Zagros Mountains in the Dezful Embayment (SW Iran): constraints from fluid inclusions

To constraint the diagenetic and thermal history in the Mesozoic-Tertiary succession of the Zagros Fold-Belt, a study was performed on fluid inclusions trapped in intergranular, vug, and fracture-filling cements in Jurassic to Miocene outcrop samples collected along the Anneh and Fahliyan Valleys of Khuzestan Province, southwest Iran. Petrographic observations showed at least two systems of fractures that postdate intergranular cementation. Two different types of oil-filled fluid inclusions occur in the intergranular cements and in the first fracture network, but they are absent in the second fracture network. Microthermometry of fluid inclusions was used to determine the temperature and salinity of fluids responsible for mineral precipitation. Within intergranular cements and calcite fillings the oldest fractures, precipitation occurred from high saline fluids in a temperature range of 60–120°C, depending on the stratigraphic depth. The strong correlation between fluid inclusions temperature and stratigraphic depth suggests that the intergranular cementation and the first fracture-filling event occurred prior to structural deformation. Furthermore, this correlation indicates a relatively constant paleogeothermal gradient at the time of cement precipitation of about 28°C/Km. On the contrary, fluid inclusions trapped in cements within the second fracture network lack oil and contain freshwater trapped at low temperatures that do not correlate to the stratigraphic position. This suggests second fracturing event occurred after oil migration and during or after deformation of the Zagros Fold-Belt, when the samples were in a near-surface position.     

DEM assessment of impact forces of dry granular masses on rigid barriers

In the design of sheltering structures/embankments for the mitigation of the risk due to rapid and long spreading landslides, a crucial role is generally played by the assessment of the impact force exerted by the flowing mass on the artificial obstacle. This paper is focused on this issue and in particular on the evaluation of the maximum impact force on the basis of the results obtained by performing an extensive numerical campaign by means of a 3D discrete element code, in which a dry granular mass is schematised as a random distribution of rigid spherical particles. The granular mass is generated just in front of the obstacle: its initial volume, velocity distribution, height, length and porosity are arbitrarily assigned, and the impact process is exclusively analysed. The initial conditions are varied to take a large variety of geometrical/mechanical factors, such as the initial front inclination, its height, the initial void ratio, the length of the impacting mass and the inter-particle friction angle, into consideration. A design formula is also proposed on the base of the obtained results and critically compared with the literature data.     

Direct 40Ar/39Ar dating of Late Ordovician and Silurian brittle faulting in the southwestern Norwegian Caledonides

Structural data as well as U–Pb zircon and ⁴⁰Ar/³⁹Ar biotite and muscovite ages were collected from the Rolvsnes granodiorite in western Norway. The granodiorite intruded at c. 466 Ma, cooled quickly and escaped later viscous deformation. Brittle top‐to‐the‐NNW thrust faults (Set I) and WNW–ESE striking dextral strike‐slip faults (Set II) formed in a NNW–SSE transpressional regime. ⁴⁰Ar/³⁹Ar dating of synkinematic mica from both sets reveals a c. 450 Ma (Late Ordovician) age of faulting, which constrains early‐Caledonian brittle deformation. Set I and II faults are overprinted by a set of lower‐grade, variably oriented chlorite‐ and epidote‐coated faults (Set III) constraining WNW–ESE shortening. A lamprophyric dyke oriented compatibly with this stress field intruded at c. 435 Ma (Silurian), indicating that Set III formed at the onset of the Scandian Baltica–Laurentia collision. The preservation of Caledonian brittle structures indicates that the Rolvsnes granodiorite occupied a high tectonic level throughout the Caledonian orogeny.     

Biomorphological scaling laws from convectively accelerated streams

Worldwide convectively accelerated streams flowing in downstream-narrowing river sections show that riverbed vegetation growing on alluvial sediment bars gradually disappears, forming a front beyond which vegetation is absent. We revise a recently proposed analytical model able to predict the expected longitudinal position of the vegetation front. The model was developed considering the steady state approximation of 1-D ecomorphodynamics equations. While the model was tested against flume experiments, its extension and application to the field is not trivial as it requires the definition of proper scaling laws governing the observed phenomenon. In this work, we present a procedure to calculate vegetation parameters and flow magnitude governing the equilibrium at the reach scale between hydromorphological and biological components in rivers with converging boundaries. We collected from worldwide rivers data of section topography, hydrogeomorphological and riparian vegetation characteristics to perform a statistical analysis aimed to validate the proposed procedure. Results are presented in the form of scaling laws correlating biological parameters of growth and decay from different vegetation species to flood return period and duration, respectively. Such relationships demonstrate the existence of underlying selective processes determining the riparian vegetation both in terms of species and cover. We interpret the selection of vegetation species from ecomorphodynamic processes occurring in convectively accelerated streams as the orchestrated dynamic action of flow, sediment and vegetation characteristics. © 2019 John Wiley & Sons, Ltd.     

The Reticulatus method for shear strengthening of fair-faced masonry

This paper presents the results of several experimental campaigns recently carried out by the authors and devoted to the investigation of the mechanical performance of wall panels strengthened by applying repointing mortar and high strength stainless steel or composite cords. The reinforcement system, known as Reticulatus, allows the reinforcement of regular and irregular-shape masonry walls, when the fair-faced aspect must be kept. In the perspective of using this reinforcement method, this article summarizes the research that has been done so far, presenting new original test results and discussing the design procedures. Twenty-two square wall panels were loaded in their plane by means of a single point load acting through the panel’s diagonal. Experimental results are presented for four types of cord reinforcement using matched samples, reinforced and not. Increases in shear strength from 15 to 170 % were achieved for the strengthened panels. Each wall panel was loaded well into the lateral post-elastic regime and then unloaded. Experimental results were in good agreement with predictions from simple models which assume the wall panels to behave like a plate, neglecting the contribution of the repointing mortar, and accounting for the non-linear behavior of the masonry.     

Natural hexavalent chromium in groundwaters interacting with ophiolitic rocks

Thirty of the 58 groundwaters sampled in September-October 2000 in the study area (La Spezia Province, Italy) have Mg-HCO₃ to Ca-HCO₃ composition, undetectable Cr(III) contents, and virtually equal concentrations of total dissolved Cr and Cr(VI). Therefore, dissolved Cr is present in toto as Cr(VI), with concentrations of 5-73 ppb. These values are above the maximum permissible level for drinking waters (5 ppb). Local ophiolites, especially serpentinites and ultramafites, are Cr-rich and represent a Cr source for groundwaters. However, since Cr is present as Cr(III) in rock-forming minerals, its release to the aqueous solution requires oxidation of Cr(III) to Cr(VI). This can be performed by different electron acceptors, including Mn oxides, H₂O₂, gaseous O₂, and perhaps Fe(III) oxyhydroxides. Based on this evidence and due to the absence of anthropogenic Cr sources, the comparatively high Cr(VI) concentrations measured in the waters of the study area are attributed to natural pollution.     

Major,trace element and stable isotope composition of water and muds precipitated from the hot springs of Bolivia: Are the waters of the spring's potential ore forming fluids?

The deposition of metal-rich black or reddish muds by many thermal springs in the Cordilleras and the Altiplano of Bolivia suggest that these geothermal waters may be related to those that once formed the world-class Bolivian tin, silver and gold mineralisation. The discharge temperatures of these springs are as high as 70 °C. According to δ¹⁸O, δD, tritium data and Ar/N₂ ratios these waters are predominantly of meteoric origin. Less than 10% of the discharging thermal water represents deep-seated metal-rich thermal brines of at least 530 °C according to carbon exchange between CO₂ and CH₄. These brines ascend along tectonic faults and mix with low-temperature meteoric water in surface-near aquifers. The meteoric component of the thermal water is recharged in the high Cordilleras with residence times exceeding 50 years. The chemical composition of the thermal water is dominated by the rather inefficient low-temperature leaching of the surface-near aquifer rocks by meteoric water. The small fraction of metal-rich hot deep-seated water is not able to increase the metal content of the water mix to a level sufficient to classify these thermal waters as ore-bearing. Surface-near leaching is supported, e.g., by the B/Li ratios of the spring water of the Western Cordillera and Caleras/Pulacayo in the Eastern Cordillera that correspond very closely to that of the easily leachable glassy inclusions of the outcropping andesitic lavas. The often remarkable metal content of the muds deposited by the springs originate from efficient scavenging of heavy metals by ferric oxyhydroxides. Under the given arid to semi-arid climate the muds are additionally enriched in metals by wind-transported dust. The present study does support a relation of the actual thermal waters with neither the classical subduction-related Upper Tertiary tin, silver and gold mineralisation nor the supposed younger Sb mineralisation of Bolivia.     

Timescales and dynamics of the formation of a thermocline

In a state of equilibrium, the constraint of a balanced heat budget for the ocean strongly influences the depth of the tropical thermocline because that depth controls the rate at which the ocean absorbs heat from the atmosphere. Thus, an increase in the oceanic heat loss in high latitudes results in a shoaling of the equatorial thermocline so that the heat gain also increases. How does the ocean adjust to such a new equilibrium state after an abrupt change in the heat flux in high latitudes? The adjustment of the wind-driven circulation of the upper ocean is shown to involve two timescales. The first is the familiar adiabatic wave-adjustment time associated with the horizontal redistribution of warm water above the thermocline in shallow water models. (This is essentially the time it takes Rossby and Kelvin waves to propagate from the disturbed extra-equatorial region to the equator.) The second adjustment-time is associated with the diabatic processes that come into play once the waves from higher latitudes modify the thermal structure in low latitudes and hence the flux of heat into the ocean; it is the timescale on which the ocean recovers a balanced heat budget. The identification of this timescale is the main result of this paper.Through a series of simulations of an idealized ocean basin, we identify the diabatic timescale and argue that it is determined by the strength of the upwelling and the intensity of the air–sea heatfluxes. By simulating the formation of a thermocline from isothermal conditions, we are able to relate this timescale to other relevant timescales such as that associated with diffusive processes and the adiabatic timescale invoked by Gu and Philander [Gu, D., Philander, S.G.H., 1997. Interdecadal climate fluctuations that depend on exchanges between the tropics and extra-topics. Science 275, 805–807].     

The Central Main Ethiopian Rift is younger than 8 Ma: confirmation through apatite fission‐track thermochronology

An isolated block of Precambrian basement rocks and Mesozoic sediments is exposed at Kella along the western margin of the Central Main Ethiopian Rift (MER), surrounded by Tertiary to Quaternary volcanic rocks. Apatite fission‐track thermochronology on two basement samples yielded ages of 7.2 ± 1.0 Ma and 6.7 ± 3.0 Ma and a long mean track length (>14.5 μm). Rapid Late Miocene cooling is attributed to denudation related to rifting. Despite the paucity of data, due to the absence of suitable lithologies in the area, our data confirm that the Central MER is younger than 8 Ma as recently proposed on the basis of field evidence and radiometric dating of volcanics. This implies that the Central MER formed after the Northern MER, indicating a diachronous development of this third arm of the Red Sea–Gulf of Aden–Ethiopian Rift system. Terra Nova, 00, 000–000, 2010