Re-equilibration of detrital muscovite and the formation of interleaved phyllosilicate grains in low temperature metamorphism,northern Apennines,Italy

Low temperature metamorphosed clastic rocks of northern Apennines (Verrucano) contain detrital and metamorphic muscovite along with aggregates of interleaved phyllosilicate grains. The extent of celadonite substitution in the metamorphic muscovite progressively increases from Al-rich pyrophyllite-bearing samples to Al-poor K-feldspar-bearing samples and appears to be compatible with the phase relation in the AKF and AKNa diagrams. Some detrital muscovite grains, not equilibrated with the present metamorphic mineral assemblages, seem to be unreacted grains retaining their premetamorphic composition. The chemistry of the re-equilibrated detrital muscovite is mainly controlled by the activity of Al₂O₃ that is implied by mineral assemblages in the host rocks and is independent of the original composition of detrital mica. Four types of phyllosilicate associations in the interleaved phyllosilicate grains were recognized: 1) muscovite- pyrophyllite-sudoite; 2) muscovite-pyrophyllite-chlorite; 3) muscovite-paragonite-chlorite; 4) muscovite-chlorite. A microstructural and petrological model is proposed for the origin of interleaved phyllosilicate grains in the Verrucano rocks. The model supports the idea that the interleaved phyllosilicate grains are the result of the trend towards equilibrium between detrital muscovite, metamorphic mineral assemblages and the fluid phase.     

Chemical and isotopic equilibrium between CO2 and CH4 in fumarolic gas discharges: Generation of CH4 in arc magmatic-hydrothermal systems

The chemical and isotopic composition of fumarolic gases emitted from Nisyros Volcano, Greece, and of a single gas sample from Vesuvio, Italy, was investigated in order to determine the origin of methane (CH₄) within two subduction-related magmatic-hydrothermal environments.Apparent temperatures derived from carbon isotope partitioning between CH₄ and CO₂ of around 340°C for Nisyros and 470°C for Vesuvio correlate well with aquifer temperatures as measured directly and/or inferred from compositional data using the H₂O-H₂-CO₂-CO-CH₄ geothermometer. Thermodynamic modeling reveals chemical equilibrium between CH₄, CO₂ and H₂O implying that carbon isotope partitioning between CO₂ and CH₄ in both systems is controlled by aquifer temperature.N₂/³He and CH₄/³He ratios of Nisyros fumarolic gases are unusually low for subduction zone gases and correspond to those of midoceanic ridge environments. Accordingly, CH₄ may have been primarily generated through the reduction of CO₂ by H₂ in the absence of any organic matter following a Fischer-Tropsch-type reaction. However, primary occurrence of minor amounts of thermogenic CH₄ and subsequent re-equilibration with co-existing CO₂ cannot be ruled out entirely. CO₂/³He ratios and δ¹³C_CO2 values imply that the evolved CO₂ either derives from a metasomatized mantle or is a mixture between two components, one outgassing from an unaltered mantle and the other released by thermal breakdown of marine carbonates. The latter may contain traces of organic matter possibly decomposing to CH₄ during thermometamorphism.     

Carbon dioxide degassing and thermal energy release in the Monte Amiata volcanic-geothermal area (Italy)

The quaternary volcanic complex of Mount Amiata is located in southern Tuscany (Italy) and represents the most recent manifestation of the Tuscan Magmatic Province. The region is characterised by a large thermal anomaly and by the presence of numerous CO₂-rich gas emissions and geothermal features, mainly located at the periphery of the volcanic complex. Two geothermal systems are located, at increasing depths, in the carbonate and metamorphic formations beneath the volcanic complex. The shallow volcanic aquifer is separated from the deep geothermal systems by a low permeability unit (Ligurian Unit). A measured CO₂ discharge through soils of 1.8 × 10⁹ mol a⁻¹ shows that large amounts of CO₂ move from the deep reservoir to the surface. A large range in δ¹³C_TDIC (−21.07 to +3.65) characterises the waters circulating in the aquifers of the region and the mass and isotopic balance of TDIC allows distinguishing a discharge of 0.3 × 10⁹ mol a⁻¹ of deeply sourced CO₂ in spring waters. The total natural CO₂ discharge (2.1 × 10⁹ mol a⁻¹) is slightly less than minimum CO₂ output estimated by an indirect method (2.8 × 10⁹ mol a⁻¹), but present-day release of 5.8 × 10⁹ mol a⁻¹ CO₂ from deep geothermal wells may have reduced natural CO₂ discharge. The heat transported by groundwater, computed considering the increase in temperature from the infiltration area to the discharge from springs, is of the same order of magnitude, or higher, than the regional conductive heat flow (>200 mW m⁻²) and reaches extremely high values (up to 2700 mW m⁻²) in the north-eastern part of the study area. Heat transfer occurs mainly by conductive heating in the volcanic aquifer and by uprising gas and vapor along fault zones and in those areas where low permeability cover is lacking. The comparison of CO₂ flux, heat flow and geological setting shows that near surface geology and hydrogeological setting play a central role in determining CO₂ degassing and heat transfer patterns.     

Experiments on the effect of inflow and outflow sequences on suspended sediment exchange rates

In laboratory experiments, the influence of inflow and outflow sequences on the behavior of fine sedi-ment was investigated. The experimental set-up consisted of two interconnected rectangular basins, between which water was moved back and forth. Suspended sediment concentration in the main basin as well as the sediment exchange rates were derived from turbidity measurements.The suspended sediment ratio, SSR, and sediment exchange rates (influx sediment rate, ISR, and evacuated sediment rate, ESR) were measured. In twenty test runs, a parametric study on the magnitude and frequency of inflow and outflow cycles, the relative duration between inflow and outflow sequences, the initial sediment concentration, and the intake position was done. An initial test with stagnant water described the set-tling behavior of fine sediment and served as a reference scenario.The test results show that settling of fine particles near the intake/outlet structure can be considerably reduced by the nature of the inflow and outflow sequences. High cycle magnitude and frequency lead to maximum suspended sediment ratio in the system. For low discharges, the evolution of suspended sediment concentration cannot be directly correlated to the inflow and outflow cycles. However, compared to"no operation"conditions, the suspended sediment ratio could be increased by 10%to 40%locally. For high discharge, the evolution of suspended sediment concentration correlated with discharge cycles and suspended sediment ratios between 50%and 80%higher than for stagnant water could be achieved. Similar ratios could be obtained when the intake is located closer to the bottom or to the free water surface.Meanwhile, the overall sediment balance remained in equilibrium over the test period, indicating that the influx and evacuated sediment rates are not significantly influenced by the inflow and outflow cycles.     

Strict positive definiteness under axial symmetry on the sphere

Stochastic Environmental Research and Risk Assessment - Axial symmetry for covariance functions defined over spheres has been a very popular assumption for climate, atmospheric, and environmental...     

Experiments on Surface Waves Interacting with Flexible Aquatic Vegetation

Surface wave interaction with aquatic vegetation appears to play a key role in coastal hydro-morpho-dynamics. As an example, the presence of a dense meadow at intermediate water depth is usually associated with a stable and resilient shore. Wave-meadow interactions are investigated here by means of physical modelling, with a focus on wave height distribution and hydrodynamics. The central part of a wave flume is covered by flexible artificial seagrass, composed of polyethylene leaves. This vegetation is tested in both near emergent and submerged conditions. The wave height reduction is evaluated by means of a drag coefficient defined from linear wave theory, which contains all the unknowns of the adopted methodology. The behaviour of such a coefficient is investigated as a function of a wave related Reynolds number. The influence of the flexibility of the leaves is also considered, together with a wave frequency parameter. The results show a complex behaviour with three different trends for near rigid, intermediate or highly flexible leaves. Amplitudes of the orbital velocities are investigated and show a fairly good match with the linear wave theory. On the contrary, the mean velocity along the water column appears to be modified by the seagrass for submerged leaves.     

Breaking wave loads at vertical seawalls and breakwaters

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.     

Characterizing impulsive wave-in-deck loads on coastal bridges by probabilistic models of impact maxima and rise times

When waves impact a seawall, a vertical breakwater, an exposed jetty, a pier or a coastal bridge, they abruptly transfer their momentum into the structure. This energy transfer can be very violent and its duration exceptionally short. In the case of coastal bridges, whose spans are designed to have very short vibration period, wave impacts might have duration comparable to the natural period of oscillation of the structure, which therefore becomes prone to damage and failure. Previous forensic studies have documented the relative importance of impulsive loads on deck suspended structure, demonstrating the need to assess the effect of wave impacts on both the stability and the integrity of structural members since the early stages of the design. This requires the estimation of the dynamic characteristics of the loading pattern, and in particular the wave impulse and corresponding impact maxima and rise times. Based on the conservation of momentum, functional relationships between these parameters have been identified since pioneering work dating back to the late '30s of the 20th century. The complexity of the loading process, however, results in a significantly large variability of wave impact maxima and rise times even under similar conditions, suggesting the need for a probabilistic approach to the definition of the relationship between these two variables, to be applied when estimating the dynamic properties of wave for use in structural analysis of coastal structures. In the recent past, some effort has been made to identify functional relationships between such quantities; these require the assessment of the conditional quantiles (or similarly the conditional distribution) of wave impact maxima given the rise times. In this paper, we compare three different statistical methods proposed in the literature to accomplish this task, in order to assess the reliability of the approach and suggest guidelines for practical applications. A copula-based method, Generalized Additive Models for Location, Scale and Shape (GAMLSS), and quantile regression are applied to measurements from large-scale 3-dimensional physical model tests. The investigation suggests that quantile regression gives the simplest results to be used in practice; copula approach and GAMLSS are possible alternative when semi-parametric or fully parametric modeling is needed.     

Biomarkers of Exposure and Effects for Assessing Toxicological Risk of Endocrine Disrupters in Top Predators of the Mediterranean Sea

Abstract. Endocrine Disrupting Chemicals (EDCs) have the potential to alter hormone pathways that regulate reproductive processes in wildlife and fisheries. In this research the unexplored hypothesis that Mediterranean top predator species (such as large pelagic fish and marine mammals) are potentially at risk due to EDCs is investigated. In the Mediterranean environment, top predators accumulate high concentrations of polyhalogenated aromatic hydrocarbons (PHAHs) and toxic metals, incurring high toxicological risk. Here we illustrate the need to develop sensitive biomarkers for evaluation of toxicological risk in top marine predators (Xiphias gladius, Thunnus thynnus thynnus) and non-lethal techniques, such as non-destructive biomarkers, for the hazard assessment of threatened species exposed to EDCs, such as marine mammals ( Stenella coeruleoalba, Tursiops truncatus, Delphinus delphis and Balaenoptera physalus ).