The Ricker Hills Tillite provides evidence of Oligocene warm-based glaciation in Victoria Land, Antarctica

The relationship between the Ricker Hills Tillite (RHT), which represents the northernmost outcrop of lithified continental glacial deposits in Victoria Land, is discussed with respect to the glacial landscape assemblage of the Ricker Hills, a nunatak at the internal border of the Transantarctic Mountains. A warm-based ice sheet deposited the tillite and induced syn- to post-depositional glacial deformation under wet conditions both of the tillite and of the bedrock. The thickness of the ice sheet on the nunatak is estimated to have been 600 m, at most. The area had been deeply eroded before deposition of the RHT as documented by the low elevation of tillite outcrops located in overdeepened depressions of the nunatak. Micropaleontological analysis evidences only the presence of Permian to Jurassic palynomorphs. X-ray diffraction and SEM–EDS analyses of clay minerals in the RHT indicate continental chemical weathering under wet conditions after the RHT deposition. As documented by clay mineral assemblage variation in CRP drillholes, the progressive cooling of the Antarctic continent allowed chemical weathering in “warm” conditions until the Late Oligocene period in southern Victoria Land, leading to a chronological constrain for RHT deposition. Conservatively estimating the sea level to have been between the tillite outcrops and the erosional trimline limiting horns in the Ricker Hills, at the time of RHT deposition, we suggest that the maximum uplift of the area would not have exceeded 900–1500 m since at least Late Oligocene.     

A site effect study in the Verchiano valley during the 1997 Umbria-Marche (Central Italy) earthquakes

Strong site effects were observed during the two M _W 5.7 and M _W 6.0 main shocks of the Colfiorito seismic crisis which occured on September 26, 1997 in Umbria-Marche (Central Italy).The most obvious indications of these effects are the dramatic differences in damage shown by buildings of similar construction in neighboring villages.Such observations were specifically made in the Verchiano valley in the fault area, 15 km south of Colfiorito where the Verchiano village and the Colle and Camino hamlets were heavily damaged (MCS intensity IX-X) since the first main shock of 1997/09/26,while in contrast, the Curasci village located 2 km eastwards remains almost intact.In order to study the anomalous ground motion amplifications in this area, an array of 11, 3-components seismo- and accelero-meters was set up during the 1997/10/20-24 period, extending from the western side of the valley, up to the top of Mount San Salvatore, going accross the Colle and Curasci hamlets.During the experiment, 67 aftershocks enlightened the valley from the Colfiorito (10 km north) and the Sellano (6 km south) active swarms.Seismic refraction experiments were conducted at the same time in the 500 m wide, 1500 m long Verchiano valley in order to determine the thickness and main characteristics of the alluvial infilling.The main results are: (i) compared to the valley side ground motion, and for all the events, recordings in the central part of the valley (piana di Verchiano) show relative amplification of 10 with a clear lengthening of the seismogram duration by a factor of 2 – (ii) broad band relative amplification of 6–8 is also clearly identified at the top of the Mount San Salvatore overhanging the valley – (iii) any of the site effect measurements done explains by itself the strongly contrasted damage observed at Colle and Curasci: i.e. the modification of the near-field radiation pattern by interaction with the free heterogeneous surface may have induced local shadow zones that saved Curasci.     

Map of isoseismals of the main Friuli earthquake of 6 May 1976

Summary The isoseismal map of the North-Italian earthquake of 6 May 1976 was compiled using the contributions of the European countries lying within the shaken area. The characteristic feature of the macroseismic field is discussed.     

An alternative model for positive shifts in shallow-marine carbonate δ13C and δ18O

Abstract Positive shifts in global seawater δ¹³C_DIC are related to changes in the ratio of organic relative to inorganic carbon burial in oceanic basins, whereas factors such as climatic cooling and the accumulation of polar ice are known to cause positive shifts in δ¹⁸O. Here, an alternative model is proposed for the formation of local positive isotope shifts in shallow-marine settings. The model involves geochemically altered platform-top water masses and the effects of early meteoric diagenesis on carbonate isotopic composition. Both mechanisms are active on modern (sub)tropical carbonate platforms and result in low carbonate δ¹³C and δ¹⁸O relative to typical oceanic values. During high-amplitude transgressive events, the impact of isotopically light meteoric fluids on the carbonate geochemistry is much reduced, and ¹³C-depleted platform-top water mixes with open oceanic water masses having higher isotope values. Both factors are recorded as a transient increase in carbonate ¹³C and ¹⁸O relative to low background values. These processes must be taken into consideration when interpreting the geochemical record of ancient epeiric seas.     

Crustal zircons and mantle sulfides: Archean to Triassic events in the lithosphere beneath south-eastern Sicily

Three types of zircon coexist in an unusual lower crustal xenolith from the Valle Guffari diatreme (Hyblean Plateau, Sicily): igneous Type 1 (near-euhedral, weakly zoned; Ce/Ce > 1); partially recrystallised Type 2 (ovoid, structureless; weak Ce anomaly); hydrothermal Type 3 (sugary, spongy-textured, probably related to F-rich aqueous fluids). U–Pb dating by LAM-ICPMS, supported by in situ Hf-isotope analysis, suggests that both Type 1 and Type 2 zircons were originally Archean (ca 2.7 Ga), though many of these grains have experienced severe Pb loss. The U–Pb ages of the hydrothermal zircons cluster around 246 Ma, interpreted as the timing of the hydrothermal event. Their ε_Hf (+ 8.5 to − 1.2) indicates the mixing of old crustal components and material from a juvenile source.

In situ Os-isotope analyses of sulfides hosted in peridotite xenoliths from Valle Guffari show Paleoproterozoic–Archean T_RD minimum ages, corresponding to the age of the oldest zircon grains in the crustal xenolith. Other peaks of T_RD ages suggest that multiple metasomatic events have affected the lithospheric mantle.

These observations suggest that the lower crust and the upper part of the lithospheric mantle beneath the Hyblean Plateau represent the northernmost portion of the African Plate. These two units have coexisted since at least late Archean time, and have remained linked through several episodes of crustal modification, including the Permo-Triassic hydrothermal event, which was probably related to the onset of rifting in the Ionian Basin.     

Geological and archaeological evidence of active faulting on the Martana Fault (Umbria–Marche Apennines,Italy) and its geodynamic implications

This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ₃ axis and NW–NNW σ₁ axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.     

Statistical correlation of earthquake and ambient noise spectral ratios

The Horizontal-to-Vertical Spectral Ratio from earthquake (HVSR) and from ambient noise (HVN) recordings realistically indicate the fundamental frequency of soil response but, for the majority of the worldwide examined sites, they do not provide reliable amplification curves as calculated by the earthquake standard Spectral Ratio (SSR). Given the fact that HVSR and especially HVN can be easily obtained, it is challenging to search for a meaningful correlation with SSR amplification functions for the entire frequency band and to use the results for the SSR estimate at a further site where only noise measurements are available. To this aim we used recordings from 75 sites worldwide and we applied a multivariate statistical approach (canonical correlation analysis) to investigate and quantify any correlation among spectral ratios. The canonical correlation between SSR and HVN is then used to estimate the expected SSR at each site by a weighted average of the SSR values measured at the other sites; the weights are properly set to account more for sites with similar behaviour in terms of the canonical correlation results between HVN and SSR. This procedure, repeated for all sites in turn, constitutes the basis of a cross validation. The comparison between the inferred and the original SSR highlights the improvements of site response estimation with respect to the use of ambient noise techniques. The goodness and limitations of the reconstruction procedure are explained by specific geological settings.     

On the explicit determination of stability constants for linearized geodetic boundary value problems

The theory of GBVPs provide the basis to the approximate methods used to compute global gravity models. A standard approximation procedure is least squares, which implicitly assumes that data, e.g. gravity disturbance and gravity anomaly, are given functions in L ²(S). We know that solutions in these cases exist, but uniqueness (and coerciveness which implies stability of the numerical solutions) is the real problem. Conditions of uniqueness for the linearized fixed boundary and Molodensky problems are studied in detail. They depend on the geometry of the boundary; however, the case of linearized fixed boundary BVP puts practically no constraint on the surface S, while the linearized Molodensky BVP requires the previous knowledge of very low harmonics, for instance up to degree 25, if we want the telluroid to be free to have inclinations up to 60^°.