The contrasting geographies of 'Padania': the case of the Lega Nord in Northern Italy

The Lega Nord (Northern League) regionalist party, which has risen to prominence in Italy in recent years, has a specific geographical focus to its political project. This is premised essentially upon the protection of Northern Italian economic (and cultural) interests, however, this geographical focus has been modified during the Lega Nord's relatively short political history. This paper explores the reasons why there have been various shifts in geographical emphasis in the party's political rhetoric as well as the ways in which support for the Lega Nord has changed (or not) as a result of these changes. Interestingly, the latest shift in the Lega Nord's rhetoric has seen the party attempting to construct (and invent) a geography and an ethnicity for a place it calls 'Padania' (which roughly corresponds to North and Central Italy) that has never existed administratively or historically. However, as the paper argues, the Lega Nord's attempts to create a 'Padanian' political identity, have not been matched by any significant changes in its electoral geography.     

A model for silicate melt viscosity in the system CaMgSi2O6-CaAl2Si2O8-NaAlSi3O8

Five hundred eighty-five viscosity measurements on 40 melt compositions from the ternary system CaMgSi₂O₆ (Di)-CaAl₂Si₂O₈ (An)-NaAlSi₃O₈ (Ab) have been compiled to create an experimental database spanning a wide range of temperatures (660-2175°C). The melts within this ternary system show near-Arrhenian to strongly non-Arrhenian properties, and in this regard are comparable to natural melts. The database is used to produce a chemical model for the compositional and temperature dependence of melt viscosity in the Di-An-Ab system. We use the Vogel-Fulcher-Tammann equation (VFT: log η = A + B/(T − C)) to account for the temperature dependence of melt viscosity. We also assume that all silicate melts converge to a common viscosity at high temperature. Thus, A is independent of composition, and all compositional dependence resides in the parameters B and C. The best estimate for A is −5.06, which implies a high-temperature limit to viscosity of 10^-5.06 Pa s. The compositional dependence of B and C is expressed by 12 coefficients (b_i=1,2.6, c_j=1,2..6) representing linear (e.g., b_i=1:3) and higher order, nonlinear (e.g., b_i=4:6) contributions. Our results suggest a near-linear compositional dependence for B (<10% nonlinear) and C (<7% nonlinear). We use the model to predict model VFT functions and to demonstrate the systematic variations in viscosity due to changes in melt composition. Despite the near linear compositional dependence of B and C, the model reproduces the pronounced nonlinearities shown by the original data, including the crossing of VFT functions for different melt compositions. We also calculate values of T_g for melts across the Di-An-Ab ternary system and show that intermediate melt compositions have T_g values that are depressed by up to 100°C relative to the end-members Di-An-Ab. Our non-Arrhenian viscosity model accurately reproduces the original database, allows for continuous variations in rheological properties, and has a demonstrated capacity for extrapolation beyond the original data.     

Geographic Information Technologies and the History of a Shoreline: The Case of Chapter 91 in New Bedford,Massachusetts*

This article discusses the use of geographic information technologies to assist researchers in the exploration of historical databases. The case study is a pilot project in which we used geographic information systems (GIS) and global positioning systems (GPS) to study the history of the Public Waterfront Act (the “Chapter 91” program), a policy designed to balance private property rights, public interest, and environmental protection in the Massachusetts tidelands. The issues discussed range from the role of GIS in society and its limitations as a representational tool to the ability of current GIS to deal with historical data and to manage temporal attributes.     

Places of the Holocaust: Towards a model of GIS of place

Progress toward developing a GIS of place can only follow from an understanding of what place is, and this understanding draws on geographical theory. Here—following Agnew, Tuan, and others—we consider place as being made up of three components—location, locale, and sense of place—which are recognizable at multiple scales and vary historically as a product of social and political processes. Using the testimonies of two survivors of the Holocaust, we sketch the components of a model for a GIS of place that allows for this theory of place to be visualized and analyzed. The model is, crucially, both multi‐scalar and sensitive to uncertainty, as a GIS of place needs to be able to zoom in and out of the different scales at which place is experienced, as well as capture both uncertain data and uncertainty as data. We see potential in the representations proposed for scaling up from the anecdotal to the general in the sense that any narrative can be grouped and classified according to places and scales as shown here. The challenge in developing a GIS of place along the lines we propose here is to design a new set of functionalities that can do so.     

Viscosity of a Teide phonolite in the welding interval

The viscosity of a natural phonolitic composition with variable amounts of H₂O has been experimentally determined. The starting materials were crystal-free phonolitic glasses from Montaña Blanca, situated within the Las Cañadas caldera of Teide. Dry phonolitic melt viscosities were determined using concentric cylinder viscometry in the low viscosity range. The glassy quench products of these runs were then hydrated by high pressure synthesis in a piston–cylinder apparatus to generate a suite of samples with water contents ranging from 0.02 to 3.75 wt%. Samples thus hydrated were quenched rapidly and prepared (cut and polished) for the determination of water contents by infrared spectroscopy before and after experimental viscometry. The viscosities of the melts (dry and hydrated) were determined at 1 bar using a micropenetration technique. Samples were stable under the measurement conditions up to 3.75 wt% H₂O. Homogeneity of water content was confirmed by infrared spectroscopy and total water contents were calculated using absorptivity coefficients for compositions extremely close to that investigated here. The variation of viscosity as a function of water content and temperature can be described in the high viscosity interval of relevance to many welding processes by the non-Arrhenian expression:

(1)

log₁₀ η=−5.900−0.286 ln (H₂O)+(10775.4−394.8(H₂O))/(T−148.7+21.65 ln (H₂O))

whereas the high viscosity range alone is adequately described by the Arrhenian expression

(2)

log₁₀ η=−10.622−0.738 ln (H₂O)+(17114.3−590.4(H₂O))×1/T

where η is the viscosity in Pa s, H₂O is the water content in wt% and T is the temperature in K.These results are particularly useful for the scaling of conditions extant during the welding of phonolitic products of Montaña Blanca. The welding of glassy phonolitic rocks is enhanced by the lower viscosity of these melts with respect to calcalkaline rhyolites. The ratio of viscosities of phonolitic to calcalkaline rhyolitic melts is a complex function of temperature and water content and reaches up to 10^4.5 at 0.1 wt% H₂O and 500°C. Abundant evidence of welding and remobilisation of pyroclastic and spatter products of Teide system volcanism are consistent with these experimental observations.     

Columnar jointing in vapor-phase-altered,non-welded Cerro Galán Ignimbrite,Paycuqui, Argentina

Columnar jointing is thought to occur primarily in lavas and welded pyroclastic flow deposits. However, the non-welded Cerro Galán Ignimbrite at Paycuqui, Argentina, contains well-developed columnar joints that are instead due to high-temperature vapor-phase alteration of the deposit, where devitrification and vapor-phase crystallization have increased the density and cohesion of the upper half of the section. Thermal remanent magnetization analyses of entrained lithic clasts indicate high emplacement temperatures, above 630°C, but the lack of welding textures indicates temperatures below the glass transition temperature. In order to remain below the glass transition at 630°C, the minimum cooling rate prior to deposition was 3.0 × 10⁻³–8.5 × 10⁻²°C/min (depending on the experimental data used for comparison). Alternatively, if the deposit was emplaced above the glass transition temperature, conductive cooling alone was insufficient to prevent welding. Crack patterns (average, 4.5 sides to each polygon) and column diameters (average, 75 cm) are consistent with relatively rapid cooling, where advective heat loss due to vapor fluxing increases cooling over simple conductive heat transfer. The presence of regularly spaced, complex radiating joint patterns is consistent with fumarolic gas rise, where volatiles originated in the valley-confined drainage system below. Joint spacing is a proxy for cooling rates and is controlled by depositional thickness/valley width. We suggest that the formation of joints in high-temperature, non-welded deposits is aided by the presence of underlying external water, where vapor transfer causes crystallization in pore spaces, densifies the deposit, and helps prevent welding.     

Beyond water, beyond boundaries: spaces of water management in the Krishna river basin, South India

As demand and competition for water resources increase, the river basin has become the primary unit for water management and planning. While appealing in principle, practical implementation of river basin management and allocation has often been problematic. This paper examines the case of the Krishna basin in South India. It highlights that conflicts over basin water are embedded in a broad reality of planning and development where multiple scales of decisionmaking and non-water issues are at play. While this defines the river basin as a disputed "space of dependence", the river basin has yet to acquire a social reality. It is not yet a "space of engagement" in and for which multiple actors take actions. This explains the endurance of an interstate dispute over the sharing of the Krishna waters and sets limits to what can be achieved through further basin water allocation and adjudication mechanisms – tribunals – that are too narrowly defined. There is a need to extend the domain of negotiation from that of a single river basin to multiple scales and to non-water sectors. Institutional arrangements for basin management need to internalise the political spaces of the Indian polity: the states and the panchayats. This re-scaling process is more likely to shape the river basin as a space of engagement in which partial agreements can be iteratively renegotiated, and constitute a promising alternative to the current interstate stalemate.     

The VLTI – A Status Report

The Very Large Telescope (VLT) Observatory on Cerro Paranal (2635 m) in Northern Chile is approaching completion. After the four 8-m Unit Telescopes (UT) individually saw first light in the last years, two of them were combined for the first time on October 30, 2001 to form a stellar interferometer, the VLT Interferometer. The combination in pairs of all four UTs was completed in September 2002. In this article, we will describe the subsystems of the VLTI and the planning for the following years. This revised version was published online in July 2006 with corrections to the Cover Date.     

Subsurface thermal conductivity assessment in Calabria (southern Italy): a regional case study

Determining the suitability of a local area at a regional or local scale for the geothermal application of low enthalpy systems requires the knowledge of rock thermal conductivity values to evaluate the possibility of low-enthalpy heat exchange. A digital cartographic tool is also needed to synthesize the thermal properties of the underground. This tool should be easily accessible and upgradeable and thus suitable for territorial planning and environmental control. In order to address these key issues, a methodological approach was developed within the framework of the national VIGOR Project, dedicated to evaluating the geothermal potential in southern Italy. In this paper the region of Calabria was selected as a case study. Around 70 samples that were representative of the main geological formations were collected from all over the area. Thermal property tests were carried out both in dry and wet conditions, using a thermal device in accordance with the modified transient plane source method. The thermal conductivity values were then compared with data from the international literature. In order to consider the influence of the entire stratigraphic sequence on the thermal conductivity parameters, a geostatistical analysis of the available lithostratigraphic data was performed using the MATLAB toolbox Modalstrata, specially developed for this purpose. A comprehensive geothermal subsurface characterization of Calabria was thus obtained.