Influence of physico-mechanical properties of Indian dimension stones on cutting rate of diamond wire saw

Cutting performance of diamond wire saw is a key factor influencing mine planning, production scheduling, and equipment selection for dimension stone quarries. It is normally measured in terms of cutting rate. Rock samples collected from various granite and marble quarries in India were tested in laboratory to determine their physico-mechanical properties. Cutting rate of diamond wire saw was measured in the field studies during the actual cutting process in quarries. Using these laboratory determined properties and the cutting rate, a multiple linear regression model has been developed to predict the cutting rate of diamond wire saw. Physico-mechanical properties of rocks determined in laboratory are used as independent variables and cutting rate as predictor variable in the regression model. The study indicates that the cutting rate increases with a decrease in most of the hardness and strength parameters of rock. The final model is tested for its goodness of fit indicating a significant linear relation between cutting rate and physico-mechanical properties, namely tensile strength, slake durability index, and Cerchar hardness index with regression coefficient of 94%. The resulting model can be used suitably for different types of hard to medium hard and soft dimension stones. The generalized model for estimating the cutting rate becomes a handy tool for mining engineers to work out operating efficiency, expenses, planning etc. of the dimension stone block cutting.     

Assessment of water inrush risk using the principal component logistic regression model in the Pandao coal mine,China

In order to improve the accuracy of floor water inrush assessment, the risk prediction model of floor water inrush was established by combining the principal component logistic regression analysis (PCLRA) and GIS spatial geographic analysis. In this paper, the geological data of Pandao coal mine was taken as the engineering background. First of all, main controlling factors of floor water inrush were determined and quantified. Next, PCLRA was used to determine the weight of each factor and establish the mathematical model for predicting the floor water inrush. And then, GIS’s spatial analysis and data processing function was used to draw related single factor thematic maps. Related thematic maps were weighted superposed to draw a floor water inrush zoning map based on PCLRA mathematical model. The study areas were divided into five levels by Jenks optimization method and vulnerability index initial model. And the corresponding threshold range was determined. The results show that (1) the high sensitivity factors in floor failure depth were added to evaluate the water inrush, and the fault fractal dimension was used to replace the fault structure related factors, and the main controlling factors of floor water inrush are more comprehensive; (2) the fitting degree of PCLRA model is high and the test accuracy is 83.3%; (3) the prediction results were well fitted to the actual position of water inrush (three water inrush points are located in the dangerous area, and two water inrush points are located in the relatively dangerous area).     

A direction-dependent shear strength criterion for rock joints with two new roughness parameters

The surface morphology of a rock joint is closely related to its mechanical properties. To reasonably characterize a rock surface, two new roughness parameters were proposed in this paper. One is related to the average slope angle of asperities that contribute to the shear strength, and the other reflects the frictional behavior of asperities that is defined as the maximum possible contact area in the shear direction. Taking the standard joint roughness coefficient profiles as example, these two roughness parameters can be applied to describe the directional characteristics of shear strength. Based on their relationships with initial dilation angles, the proposed roughness parameters were incorporated into a peak shear strength criterion. It is shown that the predicted peak shear strength is consistent with experimental data, and there is a power–law relationship. The application range of new roughness parameters was determined, which may facilitate a measurement process.     

Tectono-geomorphic development of intra-continental Cenozoic depressions within Cretaceous rocks of the Interior Homocline,Central Arabia

Intra-continental depressions occurred in Central Arabia, within the evaporite-bearing Sulaiy Formation, and extends for over 550 km along N-S arcuate belt, passing through eastern Ar Riyadh, Saudi Arabia. They mark Jurassic/Cretaceous contact within the Interior Homocline of Central Arabia, accommodating Neogene and Quaternary deposits. Two en echelon major depressional areas were discovered, the northern major depressional area and the southern major depressional area. The first depressional area occurs between Al Artawiyah and Ad Dilam towns, following the arcuate Jurassic/Cretaceous contact. It contains five depressions: N-S Al Artwaiyah depression; NW-SE Ath Thumamah depression, northeast of Riyadh; NW-SE Jinadriyah depression, east of Riyadh; E-W Al Kharj depression; and N-S Ad Dilam depression. All five depressions seems to be formed by tectonic and subsequent geomorphic events, except for Al Artawiyah and Jinadriyah depression, which developed mainly by tectonic events. Southern major depressional area steps over to southwest of Ad Dilam, and occurs from Hawtat bani tamim to Layla towns. This Hawtah-Layla major depression trends N-S, and Cretaceous units strike NNE, which is a slightly oblique relationship, suggesting expression of deep-seated structures. Tectonic features were part of the Alpine-Himalayan orogeny, developing during Eocene. They followed by a geomorphic event (karsts and subsequent collapse) that took place during Mid Pleistocene. Ad Dilam depression is a surface expression of three oil and gas fields, while the southern major depression between Hawtat Bani Tamim and Layla towns is a surface expression of four oil and gas fields. Yet, other several depressional areas are also accommodating Quaternary desert sediments, and they contain economic resources, which therefore, worth further detailed studies.     

Gold deposits associated with the gabbroic rocks at Tirek area,western Hoggar,Algeria: fluid inclusion study

The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H₂O-CO₂±CH₄ and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO₂ also contributed to the formation of the hydrothermal gold deposit at Tirek.     

Vegetation damage assessment due to Hudhud cyclone based on NDVI using Landsat-8 satellite imagery

Developing nations are abandoned against tropical cyclones because of climatic changeability; the atmosphere is probably going to expand the recurrence and extent of some outrageous climate and calamity occasions. Urban areas and towns arranged along the coastline front belt in Visakhapatnam region experienced serious harm because of Hudhud cyclone, which happened on October 12, 2014. The fundamental motivation behind this exploration was to distinguish the vegetation damage in Visakhapatnam and neighbouring towns. In this analysis, Landsat-8 satellite datasets procured prior and then afterward the cyclone have been utilized; image processing techniques have been completed to evaluate the progressions of pre- and post-disaster condition. Vegetation index strategy was utilized to assess the damage to vegetation. Arrangement results and land utilize land cover change investigation demonstrate that 13.25% of agriculture Kharif and 31.1% of vegetation was damaged. Normalized difference vegetation index (NDVI) maps were produced for the previously, then after the cyclone circumstance, and vegetation biomass damage was evaluated in Visakhapatnam and Bhimunipatanam. General loss of vegetation in both the spots was 30.67 and 43.37 km². The result of this review can be utilized by decision makers for the post-disaster support for rebuilding of influenced regions.     

Geotechnical investigation of the El-Elb dam site,northwest Riyadh,Saudi Arabia,using 2D resistivity and ground-penetrating radar techniques

In the present study, the existence of cavities, voids, and fractures was verified at the site of the El-Elb Dam, which is located to the northwest of Riyadh City across Wadi Hanifa, using 2D electrical resistivity tomography (ERT) and ground-penetrating radar (GPR) techniques. For this purpose, four ERT profiles were measured on the downstream side of the El-Elb Dam using the Syscal Pro Switch-72 resistivity meter. In addition, a GPR survey using a 400-MHz antenna and a SIR-3000 instrument was conducted along five profiles above the stilling basins on the downstream side of the dam and one radar profile was measured outside the stilling basins area across the course of the wadi. The resultant geophysical data were interpreted with the aid of information from a field-based structural and stratigraphic evaluation of the outcropped bedrock on the banks of the wadi course. The analysis of the inverted ERT and filtered radar sections revealed several resistivity and electromagnetic reflection anomalies that are identified laterally and vertically across the measured sections. These anomalies indicate the presence of fractures and karst features affected the limestone bedrock in the dam site. These near-surface karstified and fractured strata represent a critical hazard to the structural safety of the dam.     

Maturity modeling and burial history reconstruction for Garau and Sargelu formations in Lurestan basin,south Iran

The Upper Jurassic Sargelu and the Cretaceous Garau formations are important source rocks in the Lurestan basin, southwest Iran. In this study, the maturity evolution and burial history of these source rocks are investigated using 1D modeling in 15 wells within the Lurestan basin. These models are calibrated using temperature and vitrinite reflectance readings at well locations. Results indicate that thermal maturity of studied source rocks increases towards the northwest of the Lurestan basin and is the lowest over the Anaran High. The present-day level of maturity suggests that these formations are suitable candidates for shale gas resources in the Lurestan basin.     

Carbonate formation mechanism in paleosol sediments of the Bohai Sea coastal zone,China

The Bohai Sea coastal zone of China consists of the Pacific Ocean to the east and Eurasia to the west; hence, this region is influenced by both the ocean and continental landmasses. The carbonate formation mechanism of eolian sediment within this area is poorly understood. The loess-paleosol sediments of the Miaodao stratigraphical section (MDS) contain a record of carbonate changes in this region during the last interglacial period. New insights into regional carbonate formation mechanisms since the last interglacial period were obtained by analyzing the ages of various sedimentary facies in combination with proxy paleoclimatic indices (including average grain size, standard deviation, CaCO₃ content, and clay minerals), as well as via foraminiferal analysis. The results led to three principal findings: (1) The carbonate content change in the MDS was neither controlled by grain size nor affected by minerals. The carbonate change controlled by precipitate leaching in the Loess Plateau region cannot explain the eolian sediments within the Bohai Sea coastal zone. (2) Various subsections contain obvious carbonate content changes caused by foraminiferal deposits atop the eolian sediments, which were deposited by storm surges during a high sea-level period. This increased the carbonate content in the eolian sediments and restricted the carbonate content in the Bohai Sea coastal zone. (3) Newly detected foraminifera of the last interglacial period on the eolian sediment of the MDS were the main source of carbonate content, providing a new understanding of the carbonate formation mechanism in eolian sediments different from that of the Loess Plateau.