High-Frequency Hydroacoustic Monitoring in an Underground Iron Mine

The monitoring of the stability of old mines constitutes an important research objective for our institution, BRGM. The study reported here shows the contribution of high-frequency (>30 kHz) acoustic emissions to the detection of the damage within a rock mass, during an experiment within a pilot site of an old flooded iron mine. The experiment consisted of recording all the hydroacoustic events in a broad frequency band (between 30 Hz and 180 kHz), during 18 months. The monitoring network has been calibrated by a triggered block fall that made it possible to highlight a relationship between the occurrence of high-frequency/low-frequency hydroacoustic emissions and rock falls. The events recorded have been associated with the micro-failure of the rock mass near the roof, prior to the detachment of the blocks. This monitoring showed important high-frequency hydroacoustic activity, which may be associated with mechanical instabilities generated by the evolution of water pressure during the experiment. In conclusion, the high-frequency hydroacoustic activity appears to be a good indicator of instability and, therefore, this new technique constitutes a promising tool for monitoring abandoned underground cavities.     

Glaciolacustrine varved sediment as an alpine hydroclimatic proxy

The physical significance of a negative correlation between a varve record from Mud Lake, British Columbia, and temperature is discussed in the context of a process-network. The process-network is defined as the system of temporally and spatially connected processes involved in the transfer of a signal from climate to varved glaciolacustrine sediment. The six systems defining the network include climate, glacier, fluvial, geomorphic, terrestrial biologic and lacustrine systems to which each process belongs. A literature review outlines significant variation in the strength and character of correlations between components of the process-network and highlights that more comprehensive interpretations of varves as a hydroclimatic proxy require an improved understanding of the process-network. Documenting each process in the network is integral to informing a more complete model of this system, identifying processes that constitute signal transfer and assessing hydroclimatic proxies based on linear correlation. Such documentation is of growing importance as varved lacustrine sediments are increasingly used as a hydroclimatic proxy. The complex nature of the process-network requires greater emphasis on interdisciplinary cooperation and alternative methods to the linear statistical model.     

Spatially irregular sedimentation in a small, morphologically complex lake: implications for paleoenvironmental studies

A sub-bottom acoustic survey of Devil Lake on the Canadian Shield in southern Ontario reveals three acoustic facies: (I) a moderately acoustically transparent, laminated sequence interpreted as a glacilacustrine deposit in glacial Lake Iroquois or a subsequent phase in water depths up to 200 m greater than at present, (II) a transitional more transparent, less layered facies interpreted as being deposited in a more distal glacial lake from erosion of sediment in the watershed exposed by the failure of the ice dam and lowering of the glacial lake before stabilization by the development of forests, and (III) an acoustically transparent facies with similar transmissivity to the water column, interpreted as Holocene gyttja. Each is spatially variable in extent and thickness in response to those processes. There is only a very weak relation between sediment thickness and the water depth in which it was deposited. Wave processes prevent deposition in water depths less than about 6 m and evidence of erosion to the greatest depths of the lake (>40 m) is pervasive. The data demonstrate the value of acoustic survey in assessing lacustrine processes and the history of lakes, and the significance of such documentation in planning a coring program and in interpreting the results.     

Stacking for the frequencies and Qs of 0S0 and 1S0

Summary. Using nine IDA records for the Indonesian earthquake of 1977 August 19, we have formed an optimal linear combination of the records and have measured the frequency and Q of ₀ S ₀ and ₁ S ₀. The frequency was measured using the moment ratio method. The attenuation was measured by the minimum width method and by the time-lapse method. The frequency and attenuation were measured simultaneously by varying them to obtain a best fit to the data. A 2000-hr stack, the sum of nine individual records, for ₀ S ₀ gave a frequency of 0.814664 mHz±4 ppm. The values for the Q of ₀ S ₀ for the three different methods of measurement were 5600,5833 and 5700, respectively. The error in the estimates of Q ^-1 is about 5 per cent for the minimum power method. For ₁ S ₀ a 300-hr stack yielded a frequency of 1.63151 mHz±30 ppm. The values of Q for this mode were 1960, 1800 and 1850, respectively, with an error in Q ^-1 of about 12 per cent for the minimum power method.     

Processes affecting deposition of sediment in a small, morphologically complex lake

Devil Lake is morphologically complex as a result of Pleistocene glacial erosion of the Frontenac Axis of the Canadian Shield. In order to assess the processes causing highly variable sedimentation in the lake, we monitored currents, suspended sediment and temperature in the lake before and during autumn overturn in 2002. Strong summer thermal stratification (stability number to 0.11 s^–1 declining with the approach of overturn) was insufficient to prevent a dynamic response in the hypolimnion to wind forcing. Superimposed on a gradual increase in suspended sediment concentration in the last weeks of stratification from less than 2 g/l to about 30 g/l were shorter-term rises lasting up to several days. Associated with these events was an increase in particle size of the sediment from a mode of 40–50 to 150–200 m ascribed to flocculation from primary particles. These events culminated in rapid (<1 h) clearing of the water associated with strong, sustained winds over the lake, especially from the southwest. After overturn, the events were more frequent, and flocculation was unable to develop as well in the more vigorous circulation. However, currents in the hypolimnion occurred throughout the period before, during and after overturn with speed related to wind speed, but direction largely independent of wind direction. The results represent an approach to understanding the nature of sedimentary processes and thus to strengthening the use of sedimentary records as proxy in environmental and paleoenvironmental assessment.     

Environmental Radioxenon Levels in Europe: a Comprehensive Overview

Activity concentration data from ambient radioxenon measurements in ground level air, which were carried out in Europe in the framework of the International Noble Gas Experiment (INGE) in support of the development and build-up of a radioxenon monitoring network for the Comprehensive Nuclear-Test-Ban Treaty verification regime are presented and discussed. Six measurement stations provided data from 5 years of measurements performed between 2003 and 2008: Longyearbyen (Spitsbergen, Norway), Stockholm (Sweden), Dubna (Russian Federation), Schauinsland Mountain (Germany), Bruyères-le-Châtel and Marseille (both France). The noble gas systems used within the INGE are designed to continuously measure low concentrations of the four radioxenon isotopes which are most relevant for detection of nuclear explosions: ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe with a time resolution less than or equal to 24 h and a minimum detectable concentration of ¹³³Xe less than 1 mBq/m³. This European cluster of six stations is particularly interesting because it is highly influenced by a high density of nuclear power reactors and some radiopharmaceutical production facilities. The activity concentrations at the European INGE stations are studied to characterise the influence of civilian releases, to be able to distinguish them from possible nuclear explosions. It was found that the mean activity concentration of the most frequently detected isotope, ¹³³Xe, was 5–20 mBq/m³ within Central Europe where most nuclear installations are situated (Bruyères-le-Châtel and Schauinsland), 1.4–2.4 mBq/m³ just outside that region (Stockholm, Dubna and Marseille) and 0.2 mBq/m³ in the remote polar station of Spitsbergen. No seasonal trends could be observed from the data. Two interesting events have been examined and their source regions have been identified using atmospheric backtracking methods that deploy Lagrangian particle dispersion modelling and inversion techniques. The results are consistent with known releases of a radiopharmaceutical facility.     

Improved resolution of complex eigenfrequencies in analytically continued seismic spectra

Summary. The response of the Earth to an earthquake is a transient that is effectively zero several days after the event. A recording of the event, of finite duration in time, has a Fourier spectrum that is an entire, or integral, analytic function of frequency. We present a very simple procedure for computing the Fourier spectrum as a function of complex frequency; the analytically continued spectrum. By investigating the properties of the analytically continued spectrum we show how to extract high- Q modes, how to estimate Q either from the amplitude or from the width of a resonance function, and how to improve the resolution of splitting to the theoretical maximum. Examples of these procedures, using observed data, are presented.