Before and after riparian management: sediment and nutrient exports from a small agricultural catchment, Western Australia

Riparian vegetation can trap sediment and nutrients sourced from hillslopes and reduce stream bank erosion. This study presents results from a 10-year stream monitoring program (1991–2000), in a 6 km² agricultural catchment near Albany, Western Australia. After 6 years, a 1.7 km stream reach was fenced, planted with eucalyptus species and managed independently from the adjacent paddocks. Streamflow, nutrient and sediment concentration data were collected at the downstream end of the fenced riparian area, so there are data for before and after improved riparian management. Suspended sediment (SS) concentrations fell dramatically following improved riparian management; the median event mean concentration (EMC) dropped from 147 to 9.9 mg l⁻¹. Maximum SS concentrations dropped by an order of magnitude. As a result, sediment exports from the catchment decreased following improved riparian management, from over 100 to less than 10 kg ha⁻¹ yr⁻¹. Observations suggest that this was the result of reduced bank erosion and increased channel stability. Riparian management had limited impact on total phosphorus (TP) concentrations or loads, but contributed to a change in phosphorus (P) form. Before improved riparian management, around half of the P was transported attached to sediment, but after, the median filterable reactive P (FRP) to TP ratio increased to 0.75. In addition, the median FRP EMC increased by 60% and the raw median FRP concentration increased from 0.18 to 0.35 mg l⁻¹. These results suggest that there was a change in the dominant P form, from TP to FRP. Changes in total nitrogen (TN) following improved riparian management were less clear. There were reductions in TN concentrations at high flows, but little change in the loads or EMC. This study demonstrates the benefits of riparian management in reducing stream bank erosion, but suggests that in catchments with sandy, low P sorption soils, there may be limitations on the effectiveness of riparian buffers for reducing P and N exports.     

Continental rift evolution: From rift initiation to incipient break-up in the Main Ethiopian Rift, East Africa

The Main Ethiopian Rift is a key sector of the East African Rift System that connects the Afar depression, at Red Sea–Gulf of Aden junction, with the Turkana depression and Kenya Rift to the South. It is a magmatic rift that records all the different stages of rift evolution from rift initiation to break-up and incipient oceanic spreading: it is thus an ideal place to analyse the evolution of continental extension, the rupture of lithospheric plates and the dynamics by which distributed continental deformation is progressively focused at oceanic spreading centres.The first tectono-magmatic event related to the Tertiary rifting was the eruption of voluminous flood basalts that apparently occurred in a rather short time interval at around 30 Ma; strong plateau uplift, which resulted in the development of the Ethiopian and Somalian plateaus now surrounding the rift valley, has been suggested to have initiated contemporaneously or shortly after the extensive flood-basalt volcanism, although its exact timing remains controversial. Voluminous volcanism and uplift started prior to the main rifting phases, suggesting a mantle plume influence on the Tertiary deformation in East Africa. Different plume hypothesis have been suggested, with recent models indicating the existence of deep superplume originating at the core-mantle boundary beneath southern Africa, rising in a north–northeastward direction toward eastern Africa, and feeding multiple plume stems in the upper mantle. However, the existence of this whole-mantle feature and its possible connection with Tertiary rifting are highly debated.The main rifting phases started diachronously along the MER in the Mio-Pliocene; rift propagation was not a smooth process but rather a process with punctuated episodes of extension and relative quiescence. Rift location was most probably controlled by the reactivation of a lithospheric-scale pre-Cambrian weakness; the orientation of this weakness (roughly NE–SW) and the Late Pliocene (post 3.2 Ma)-recent extensional stress field generated by relative motion between Nubia and Somalia plates (roughly ESE–WNW) suggest that oblique rifting conditions have controlled rift evolution. However, it is still unclear if these kinematical boundary conditions have remained steady since the initial stages of rifting or the kinematics has changed during the Late Pliocene or at the Pliocene–Pleistocene boundary.Analysis of geological–geophysical data suggests that continental rifting in the MER evolved in two different phases. An early (Mio-Pliocene) continental rifting stage was characterised by displacement along large boundary faults, subsidence of rift depression with local development of deep (up to 5 km) asymmetric basins and diffuse magmatic activity. In this initial phase, magmatism encompassed the whole rift, with volcanic activity affecting the rift depression, the major boundary faults and limited portions of the rift shoulders (off-axis volcanism). Progressive extension led to the second (Pleistocene) rifting stage, characterised by a riftward narrowing of the volcano-tectonic activity. In this phase, the main boundary faults were deactivated and extensional deformation was accommodated by dense swarms of faults (Wonji segments) in the thinned rift depression. The progressive thinning of the continental lithosphere under constant, prolonged oblique rifting conditions controlled this migration of deformation, possibly in tandem with the weakening related to magmatic processes and/or a change in rift kinematics. Owing to the oblique rifting conditions, the fault swarms obliquely cut the rift floor and were characterised by a typical right-stepping arrangement. Ascending magmas were focused by the Wonji segments, with eruption of magmas at surface preferentially occurring along the oblique faults. As soon as the volcano-tectonic activity was localised within Wonji segments, a strong feedback between deformation and magmatism developed: the thinned lithosphere was strongly modified by the extensive magma intrusion and extension was facilitated and accommodated by a combination of magmatic intrusion, dyking and faulting. In these conditions, focused melt intrusion allows the rupture of the thick continental lithosphere and the magmatic segments act as incipient slow-spreading mid-ocean spreading centres sandwiched by continental lithosphere.Overall the above-described evolution of the MER (at least in its northernmost sector) documents a transition from fault-dominated rift morphology in the early stages of extension toward magma-assisted rifting during the final stages of continental break-up. A strong increase in coupling between deformation and magmatism with extension is documented, with magma intrusion and dyking playing a larger role than faulting in strain accommodation as rifting progresses to seafloor spreading.     

Reliability of water content estimation by profile probe and its effect on slope stability

Shallow landslide failures are distributed worldwide and cause economic losses and fatalities. A proper evaluation of the possible occurrence of shallow landslides requires reliable characterization of water content. Volumetric water content (θ) is commonly estimated using dielectric sensors, which use manufacturers’ calibration curves developed for specific soil types. In this study, we present the experimental results achieved during a laboratory calibration of a capacitance probe (PR2/6 probe), tested on two sandy soils widely outcropping in Central Italy. The proposed equations demonstrate a more reliable estimation of θ with respect to the generalized soil equation provided by the manufacturer, which overestimates θ by up to 10 percentage points. Such overestimation could affect the evaluation of suction stress in partially saturated shallow soils affecting the slope stability analysis. Although the use of θ from correct calibration equations provides less precautionary factor of safety values, a reliable evaluation of the soil moisture condition is fundamental when mapping and predicting the spatial and temporal occurrence of shallow landslides. The use of the PR2/6 probe with the appropriate soil calibration equations in early warning monitoring systems will provide a more reliable forecast, minimizing the number of false alarms.     

Cooling and exhumation history of deep‐seated and shallow level,late Hercynian granitoids from Calabria

The thermal and exhumation history of late Hercynian granitoids from Calabria (Sila and Serre massifs) has been studied using thermobarometry and radiometric age determinations. The uplift and erosion which followed contractional tectonics of Tertiary age exposed in Calabria a nearly complete section of the Hercynian crust. Field data, constrained by igneous thermobarometrical data, have enabled us to draw simplified crustal profiles. In both the Sila and Serre massifs, granitoids make up the intermediate portions of the crustal sections and are stacked as tabular intrusions for up to 13 km cumulative thickness. Shallow granitoids are characterized by a weak fabric, mostly developed in the magmatic stage, whereas deep‐seated granitoids display a strong fabric developed in the magmatic state and, with decreasing temperatures, in the subsolidus state. The intrusive bodies were emplaced at 300–290 Ma, at a time when the Calabrian crust was undergoing extensional tectonics and crustal thinning. The subsequent post‐Hercynian evolution is recorded by Rb‐Sr dates of micas and fission track ages of zircon and apatite obtained from granitoids emplaced at different depths. A decrease in Rb‐Sr and fission track ages is observed as depth of emplacement increases. Data on the post‐Hercynian geological evolution of Calabria were used to model in three stages the cooling and exhumation history of deep‐seated and shallow granitoids. The first stage, in Permian to Triassic times, was characterized by slow erosion. It was followed by a second stage of extensional tectonics in Jurassic times. The third stage was exhumation during the Apenninic Orogeny. The model has generated two P–T–t arrays, one for deep‐seated and the other for shallow granitoids of the Serre massif. The T–t paths suggest that the dates of micas, zircon and apatite are cooling ages. They also show that deep‐seated granitoids remained at temperatures above the brittle–plastic transition for a long time, whereas shallow granitoids cooled rapidly. Distinct P–T–t paths explain why deep‐seated and shallow granitoids display different fabric and microstructural features. Copyright © 2000 John Wiley & Sons, Ltd.