Assessing and correcting the effects of the chemical weathering of potsherds: A case study using soft-paste porcelain wasters from the Longton Hall (Staffordshire) factory site

Unglazed soft-paste porcelain wasters from the Longton Hall factory site are variably depleted (75–80 rel %) in CaO relative to comparatively insoluble components (e.g., Al₂O₃, TiO₂) due to the dissolution of wollastonite (CaSiO₃, a pyroxenoid) by subsurface water. The degree of desilicification is variable (0–45 rel % SiO₂). Petrographic data and element-abundance plots suggest that these were the principal effects of the chemical weathering process in most samples. The preferential dissolution of a single phase in the unglazed Longton Hall sherds permits the semiquantitative “reversal” of weathering phenomena. Alteration effects can be corrected using porosity–volume data to constrain the amount of wollastonite originally present in the weathered sherds. The original compositions of the unglazed wasters are bracketed by arithmetically “adding back” the missing pyroxenoid components according to two endmember assumptions concerning element mobility: (1) the total leaching of wollastonite components and (2) the preferential leaching of wollastonite-derived CaO. These calculations—particularly the latter—yield results that compare favourably with the compositions of relatively unaltered (wollastonite-bearing), glazed samples from the Longton Hall site. Given the potential susceptibility of archaeological ceramics to chemical weathering, it would seem prudent that these phenomena be carefully assessed, and corrected where possible, so that analytical data for these artifacts can be judiciously interpreted. © 1998 John Wiley & Sons, Inc.     

Rates of rockwall slope erosion in the upper Bhagirathi catchment,Garhwal Himalaya

Rockwall slope erosion is defined for the upper Bhagirathi catchment using cosmogenic Beryllium-10 (¹⁰Be) concentrations in sediment from medial moraines on Gangotri glacier. Beryllium-10 concentrations range from 1.1 ± 0.2 to 2.7 ± 0.3 × 10⁴ at/g SiO₂, yielding rockwall slope erosion rates from 2.4 ± 0.4 to 6.9 ± 1.9 mm/a. Slope erosion rates are likely to have varied over space and time and responded to shifts in climate, geomorphic and/or tectonic regime throughout the late Quaternary. Geomorphic and sedimentological analyses confirm that the moraines are predominately composed of rockfall and avalanche debris mobilized from steep relief rockwall slopes via periglacial weathering processes. The glacial rockwall slope erosion affects sediment flux and storage of snow and ice at the catchment head on diurnal to millennial timescales, and more broadly influences catchment configuration and relief, glacier dynamics and microclimates. The slope erosion rates exceed the averaged catchment-wide and exhumation rates of Bhagirathi and the Garhwal region on geomorphic timescales (10³−10⁵ years), supporting the view that erosion at the headwaters can outpace the wider catchment. The ¹⁰Be concentrations of medial moraine sediment for the upper Bhagirathi catchment and the catchments of Chhota Shigri in Lahul, northern India and Baltoro glacier in Central Karakoram, Pakistan show a tentative relationship between ¹⁰Be concentration and precipitation. As such there is more rapid glacial rockwall slope erosion in the monsoon-influenced Lesser and Greater Himalaya compared to the semi-arid interior of the orogen. Rockwall slope erosion in the three study areas, and more broadly across the northwest Himalaya is likely governed by individual catchment dynamics that vary across space and time. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons, Ltd.     

Very slow erosion rates and landscape preservation across the southwestern slope of the Ladakh Range,India

Erosion rates are key to quantifying the timescales over which different topographic and geomorphic domains develop in mountain landscapes. Geomorphic and terrestrial cosmogenic nuclide (TCN) methods were used to determine erosion rates of the arid, tectonically quiescent Ladakh Range, northern India. Five different geomorphic domains are identified and erosion rates are determined for three of the domains using TCN ¹⁰Be concentrations. Along the range divide between 5600 and 5700 m above sea level (asl), bedrock tors in the periglacial domain are eroding at 5.0 ± 0.5 to 13.1 ± 1.2 meters per million years (m/m.y.)., principally by frost shattering. At lower elevation in the unglaciated domain, erosion rates for tributary catchments vary between 0.8 ± 0.1 and 2.0 ± 0.3 m/m.y. Bedrock along interfluvial ridge crests between 3900 and 5100 m asl that separate these tributary catchments yield erosion rates <0.7 ± 0.1 m/m.y. and the dominant form of bedrock erosion is chemical weathering and grusification. Erosion rates are fastest where glaciers conditioned hillslopes above 5100 m asl by over‐steepening slopes and glacial debris is being evacuated by the fluvial network. For range divide tors, the long‐term duration of the erosion rate is considered to be 40–120 ky. By evaluating measured ¹⁰Be concentrations in tors along a model ¹⁰Be production curve, an average of ~24 cm is lost instantaneously every ~40 ky. Small (<4 km²) unglaciated tributary catchments and their interfluve bedrock have received very little precipitation since ~300 ka and the long‐term duration of their erosion rates is 300–750 ky and >850 ky, respectively. These results highlight the persistence of very slow erosion in different geomorphic domains across the southwestern slope of the Ladakh Range, which on the scale of the orogen records spatial changes in the locus of deformation and the development of an orogenic rain shadow north of the Greater Himalaya. Copyright © 2014 John Wiley & Sons, Ltd.     

Schmidt‐hammer exposure‐age dating (SHD) of snow‐avalanche impact ramparts in southern Norway: approaches,results and implications for landform age,dynamics and development

Schmidt‐hammer exposure‐age dating (SHD) was applied to the problem of dating the diachronous surfaces of five distal river‐bank boulder ramparts deposited by snow avalanches plunging into the Jostedøla and Sprongdøla rivers in the Jostedalsbreen region of southern Norway. Approaches to local high‐precision linear age calibration, which controlled in different ways for boulder roundness, were developed. The mean age (SHD_mean) and the maximum age (SHD_max) of surface boulders were estimated for whole ramparts, crests and distal fringes. Interpretation was further assisted by reference to R‐value distributions. SHD_mean ages (with 95% confidence intervals) ranged from 520 ± 270 years to 5375 ± 965 years, whereas SHD_max ages (expected to be exceeded by <5% of surface boulders) ranged from 675 to 9065 years. SHD ages from the Jostedøla ramparts tended to be older than those associated with the Sprongdøla, rampart crests were younger than the respective distal fringes, and use of relatively rounded boulders yielded more consistent SHD ages than angular boulders. The SHD_mean ages indicate differences in recent levels of snow‐avalanche activity between ramparts and provide insights into rampart dynamics as boulders are deposited on rampart crests and, in smaller numbers, on the distal fringes. SHD_max ages provide minimum age estimates of rampart age (i.e. the time elapsed since the ramparts began to form) and suggest that at least some of the ramparts have been developing since the early Holocene. Copyright © 2015 John Wiley & Sons, Ltd.     

Quaternary alluvial-fan development, climate and morphologic dating of fault scarps in Laguna Salada, Baja California, Mexico

Late Quaternary slip across the Cañada David detachment has produced an extensive array of Quaternary scarps cutting alluvial-fans along nearly the entire length (~ 60 km) of the range-bounding detachment. Eight regional alluvial-fan surfaces (Q₁ [youngest] to Q₈ [oldest]) are defined and mapped along the entire Sierra el Mayor range-front. Terrestrial cosmogenic nuclide ¹⁰Be concentrations from individual boulders on alluvial-fan surfaces Q₄ and Q₇ yield surface exposure ages of 15.5 ± 2.2 ka and 204 ± 11 ka, respectively. Formation of the fans is probably tectonic, but their evolution is strongly moderated by climate, with surfaces developing as the hydrological conditions have changed in response to climate change on Milankovitch timescales. Systematic mapping reveals that the fault scarp array along active range-bounding faults in Sierras Cucapa and El Mayor can be divided into individual rupture zones, based on cross-cutting relationships with alluvial-fans. Quantitative morphological ages of the Laguna Salada fault-scarps, derived from linear diffusive degradation modeling, are consistent with the age of the scarps based on cross-cutting relationships. The weighted means of the maximum mass diffusivity constant for all scarps with offsets < 4 m is 0.051 and 0.066 m²/ka for the infinite and finite-slope solutions of the diffusion equation, respectively. This estimate is approximately an order of magnitude smaller than the lowest diffusivity constants documented in other regions and it probably reflects the extreme aridity and other microclimatic conditions that characterize the eastern margin of Laguna Salada.     

The structural,geometric and volumetric changes of a polythermal Arctic glacier during a surge cycle: Comfortlessbreen,Svalbard

Various parameters of the most recent surge of the polythermal glacier Comfortlessbreen in northwest Svalbard, have been assessed through a combination of remote sensing and ground observations. Analysis of a digital elevation model time‐series shows a marked change in the geometry of the glacier from quiescence (1990 and earlier) into the late surge phase (2009). The transfer of 0.74 km³ of ice caused up to 80 m of surface drawdown in the reservoir area, above the equilibrium line, whilst ice built up in a spatially concentrated manner in the receiving zone, below the equilibrium line. A ramp of ice, c. 100 m above quiescent level, developed in the lower reaches of the glacier late in the surge. Also in the lower reaches of the glacier, structures attributable to the passage of a kinematic wave are identified and the migration of a surge front on the glacier is thus inferred. In a conceptual model, we consider that a bend in the valley, in which the glacier resides, and convergence with tributary glaciers, to be significant factors in the style of surge evolution. Their flow‐restrictive interference results in slow initial mass‐transfer and the growth of a surge front within 3–4 km of the terminus. Copyright © 2015 John Wiley & Sons, Ltd.     

Geomorphic response to an active transpressive regime: a case study along the Chaman strike‐slip fault,western Pakistan

The Chaman left‐lateral strike‐slip fault bounds the rigid Indian plate boundary at the western end of the Himalayan‐Tibetan orogen and is marked by contrasting topographic relief. Deformed landforms along the fault provide an excellent record for understanding this actively evolving intra‐continental strike‐slip fault. The geomorphic response of an active transpessional stretch of the Chaman fault was studied using digital elevation model (DEM) data integrated with Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Visible and Near Infrared/Short Wave Infrared (VNIR/SWIR) and images from GeoEye‐1. Geologic and geomorphic mapping helped in reconstructing the Late Quaternary landscape history of this transpessional strand of the Chaman strike‐slip fault and the associated Spinatizha thrust fault in western Pakistan. Topographic analysis of a part of the transpression (the thrust bounded Roghani ridge) revealed northward growth of the Spinatizha fault with the presence of three water gaps and two corresponding wind gaps. Geomorphic indices including stream length‐gradient index, mountain front sinuosity, valley floor width to valley height ratios, and entrenchment of recent alluvial fan deposits were used to define the lateral growth and direction of propagation of the Spinatizha fault. Left‐lateral displacement along Chaman fault and uplift along the Spinatizha fault was defined using topographic analysis of the Roghani ridge and geomorphic mapping of an impressive alluvial fan, the Bostankaul fan. The landforms and structures record slip partitioning along the Indian plate boundary, and account for the convergence resulting from the difference in the Chaman fault azimuth and orientation of the velocity vector of the Indian plate. Copyright © 2012 John Wiley & Sons, Ltd.     

What kind of countryside do the public want: community visions from Wales UK?

This paper assesses how far community led rural visions accord with the current thrust of rural planning policy delivery in the UK. Adapting conventional visioning methods, qualitative techniques were used on eight different communities across urban, exurban and rural Wales to elicit views relating to the kind of local countryside(s) that were desired. The results show that the communities’ visions reflect an emerging consensus around local countryside priorities: multifunctionality, integration, wider countryside protection, development based on need, and local distinctiveness according with the thrust of current planning policy at national and local levels. However, there is a clear dichotomy between this and the reality of what communities actually experienced in developments affecting their countryside. Here, universal criticism was encountered over the type, pace and scale of development, the lack of rural specificity and the failure to take account of local community needs and priorities. It is hypothesized that tensions between national and local politics and stakeholder power relations are playing a crucial role in distorting the delivery of town and country planning. It is recommended that rural policy delivery must become more “joined up” and rural proofed at national and local levels concomitant with a change in the operational culture of agencies at the forefront of rural delivery. Essentially, effective engagement of top down approaches synergising with bottom up community led ideas is long overdue.